Restoration of SIDBI Apartments at Kochi

S.NO DESCRIPTION DSR AMOUNT NS AMOUNT

1 CIVIL & ALLIED WORKS 27043368.00 15611258.00

2 PLUMBING FIXTURES WORKS 7963584.00

3 ELECTRICAL & ALLIED WORKS 4548928.00 1870000.00

4 ELECTRCAL FIXTURE WORKS 3299870.00

5 STREET LIGHT WORKS 765606.00

6 FIRE DETECTION & ALARM SYSTEM 190460.00

7 FIRE FIGHTING WORKS 2052691.00 673189.00

8 CCTV WORKS 226996.00

9 LIGHTING ARESTOR WORKS 285100.00

10 DG SET WORKS 897234.00

11 OFF GRID SOLAR WORKS 1741839.00

LIFT WORKS 3560000.00

LANDSCAPE WORKS 500000.00

13 MULTIPLYING FACTOR FOR 18 % GST 1.0633

14 Total Rs including 18 % GST 35977230.8 37394676.00

16 GRAND TOTAL Rs with GST 75890312.00

16 GRAND TOTAL Rs with GST 75890312.00

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Half brick masonry with common burnt clay F.P.S. (non

1 6.13 modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level.

1.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 30.00 Sqm 1018.05 30542.00

Stone work, plain in copings, cornices, string courses and

plinth courses, upto 75 mm thick in Cement mortar 1:6 (1

cement : 6 coarse sand) including pointing with white cement

mortar 1:2 (1 white cement : 2 stone dust) with an admixture

of pigment matching the stone shade.

Marble work gang saw cut (polished and machine cut) of

thickness 18 mm for wall lining (veneer work), backing filled

with a grout of average 12 mm thick in cement mortar 1:3 (1

cement : 3 coarse sand), including pointing with white

3 8.1 cement mortar 1:2 (1 white cement : 2 marble dust) with an

admixture of pigment to match the marble shade (To be

secured to the backing by means of cramps, which shall be

paid for separately)

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra

Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and

similar locations of required size,approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges to give high

gloss finish etc. complete at all levels.

4.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to edge

to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash

basin/kitchen sink in kitchen platform, vanity counter and

similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding,

rubbing and polishing of cut edges etc. complete

Providing and fixing wire gauge shutters using galvanized

M.S. wire gauge of average width of aperture 1.4 mm in both

7 9.27 directions with wire of dia 0.63 mm, for doors, windows and

clerestory windows with hinges and necessary screws :

7.1 9.27.2 30 mm thick shutters

with ISI marked M.S. pressed butt hinges bright finished of

required size - Second class teak wood

Providing and fixing magnetic catcher of approved quality in

8 9.114 cupboard / ward robe shutters, including fixing with

necessary screws etc. complete.

8.1 9.114.1 Triple strip vertical type 181.00 No. 44.85 8118.00

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Providing and fixing factory made Fiberglass Reinforced

plastics (F.R.P.) chajja 4 mm thick of required colour, size and

design made by Resin Transfer Moulding (RTM) Machine

Technology, resulting in void free

compact laminate in single piece, having smooth gradual

slope curvature for easy drainage of water and duly

reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm

thick M.S. flat with 12 mm in built hole for

grouting on the existing wall along with the 50 mm flanges

9 9.128 duly inserted and sealed in the wall complete in one single 73 Sqm 4901.50 357810.00

piece casted monolithically,including all necessary fittings .

The FRP Chajja should be manufactured

using unsaturated Polyester resin as per IS: 6746, duly

reinforced with fibre glass chopped strand mat (CSM) as per

IS: 11551 complete with protective Gel coat U/V coating on

Top for complete resistance from the

extreme of temperature, weather & sunlight (Only plan area

of chajjas shall be measured for making payment).

Providing and fixing cup board shutters 25mm thick, with Pre-

laminated flat pressed three layer particle board or graded

wood particle board IS: 12823 marked exterior grade (Grade l

Type ll) having one side decorative lamination and other side

balancing lamination including IInd class teak wood lipping of

25mm wide x12 mm thick with necessary screws and bright

finished stainless steel piano hinges complete as per

direction of the Engineer-in-Charge

Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer using structural steel

etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates

and similar works.

Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Providing and laying Ceramic glazed floor tiles of size 300x300

mm(thickness to be specified by the manufacturer) of 1st

quality conforming to IS : 15622 of approved make in colours

such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm

thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing

with grey cement slurry @ 3.3kg/sqm including pointing the

joints with white cement and matching pigment etc.,.,

Providing and fixing 1st quality ceramic glazed floor tiles

conforming to IS : 15622 (thickness to be specified by the

manufacturer ) of approved make in all colours, shades

except burgundy, bottle green, black of any size as approved

13 11.37A by Engineer-in-Charge in skirting, risers of steps and dados 430 Sqm 938.50 403555.00

over 12 mm thick bed of cement Mortar 1:3 (1cement: 3

coarse sand) and jointing with grey cement slurry @ 3.3kgper

sqm including pointing in white cement mixed with pigment

of matching shade complete.

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)

jointing with grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching

pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles gently

14.1 11.41A.1 Double charge vitrified tile polished finish of size

Deduct for not using 20 mm thick cement mortar 1:4 (1

15 11.42 cement : 4coarse sand) bedding in laying of floor tiles and 1700.00 Sqm -735.3 -1250010

jointing with grey cement slurry @ 3.3kg/sqm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based

16 11.43 high polymer modified quick-set tile adhesive (Water based) 1700.00 Sqm 633.6 1077120

conforming to IS: 15477, in average 3mm thickness.

11.48 Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated

17 filler of desired shade(0.10 kg of hardener and 0.20 kg of

resin per kg), including filling/grouting and finishing complete

as per direction of Engineer-in-charge.

Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10 mm

gap for thermal expansion,

18.1 (i)Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water

19 12.42 pipes conforming to IS : 13592 Type A including jointing with

seal ring conforming to IS :5382 leaving 10 mm gap for

thermal expansion.

19.1 12.42.2 Single pushfit Coupler :

19.2 12.42.3 Single tee with door

19.4 12.42.6 Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips of approved

design to unplasticised - PVC rain water pipes by means of

50x50x50 mm hardwood plugs, screwed with M.S. screws of

20 12.43 required length including cutting brick work and fixing in

cement mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast

21 12.44 iron grating 15 cm diameter and weighing not less than 440 7.00 Nos 47.90 335.00

Wall painting with acrylic emulsion paint of approved brand

and manufacture to give an even shade:

22.1 13.60.1 Two or more coats on new work. 2000 Sqm 137.85 275700

Removing dry or oil bound distemper, water proofing cement

paint and the like by scrapping, sand papering and preparing

the surface smooth including necessary repairs to scratches

Painting (one or more coats) on rain water, soil, waste and

vent pipes and fittings with synthetic enamel paint of

approved brand and manufacture and required colour on old

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Painting with synthetic enamel paint of approved brand and

28 13.99 manufacture of required colour to give an even shade :

28.1 13.99.1 One or more coats on old work. 211 Sqm 86.55 18262

Finishing walls with Premium Acrylic Smooth exterior paint

with Silicone additives of required shade :

Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)

over existing cement paint surface.

Polishing in high gloss/matt finish melamine clear polish on

wood work in required color/wooden shade texture with

following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper

80/120 no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed to

dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of

finer grading with water to remove excess sealer layer and

make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all

the small and big holes/grooves etc. Filler coat to be allowed

to dry for 4 to 6 hrs on which again a light wet rubbing is

done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray

gun using melamine clear polish and melamine thinner in

required proportion. This 1st coat is allowed to dry for 24 hrs

then this dry surface is again fine wet rubbed smooth, which

is further allowed to dry for 12 hrs. The final melamine polish

is applied with compressor pressure spray gun using 19.00 Sqm 1156.55 21974.00

melamine clear polish and melamine thinner mixed in

required proportion complete as per direction of Engineer-in-

Charge. (Finalo coat to be done in 1 or 2 layers without gap of

Providing and fixing double scaffolding system (cup lock

type) on the exterior side of building/structure, upto 25

metre height, above ground level, including additional rows

of scaffolding in stepped manner as per requirement of site,

made with 40mm dia M.S. tube, placed 1.5 metre centre to

centre, horizontal & vertical tubes joint with cup & lock

system with M.S. Tubes, M.S. tube challis, M.S. clamps and

staircase system in the scaffolding for working platform etc.

and maintaining it in a serviceable condition for execution of

work of cleaning and/ or pointing and/ or applying chemical

and removing it thereafter.

The scaffolding system shall be stiffened with bracings,

runners, connecting with the building etc, wherever required,

if feasible, for inspection of work at required locations with

essential safety features for the workmen etc., complete as

per directions and approval of Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding shall be

measured for payment purpose.

(2) The payment will be made once only for execution of all

items for such works.

Repair to plaster of thickness 12mm to 20 mm in patches of

area 2.5 sqm and under, including cutting the patch in proper

shape, raking out joints and preparing plastering the wall

32 14.75 surface with white cement based polymer modified self 750.00 Sqm 540.35 405263.00

curing mortar, including disposal of rubbish, all complete as

per the direction of Engineer-In- Charge.

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Cleaning of chocked sewer line by diesel running vehicle

mounting hydraulic operated high pressure suction cum

jetting sewer cleaning machine fitted with pump having 4000

litres suction capacity and 6000 litres water jetting tank

capacity including skilled operator, supervising engineer etc.

32.1 14.77 for cleaning and partial de-silting of manholes and de- 91.00 m 285.90 26017.00

chocking of sewer lines. De-chocking and flushing of sewer

line from one manhole to another by high pressure jetting

system of 2200 PSI for sewer line from 150mm dia upto

300mm dia for all depth.

Cleaning of under ground sump, Over Head R.C.C. Tank

(independent staging) including disposal of slit and rubbish,

all as per direction of Engineer-in-Charge. The cleaning shall

consist following operations:-

(i) Tank shall be emptied of water by pumping & bottom shall

be cleaned of slit and other deposits.

(ii) Entire surface area of the sump shall then scrubbed

thoroughly with wire brush etc. and pressure washed with

(iii) Chlorination of RCC internal surface by liquid chlorine.

(iv) The treated surface shall be dried using air jetting and all

loose particles shall be removal from the surface.

(v) Finally the surface shall be treated with ultraviolet

radiation etc. as per direction of Engineer-in-Charge.

Cutting holes of required size in brick masonry wall for fixing

of exhaust fan including providing and fixing 300 mm dia PVC

34 14.81 pipe conforming BIS-12818 and making good the same etc. 54.00 No. 243.10 13127.00

complete as per direction of Engineer-in-charge.

Dismantling W.C. Pan of all sizes including disposal of

35 14.82 dismantled materials i/c malba all complete as per directions 37.00 No. 110.70 4096.00

of Engineer-in- Charge.

Hacking of CC flooring including cleaning for surface etc.

36 14.83 complete as per direction of the Engineer-in-Charge. 3001.00 Sqm 2.85 8553.00

Dismantling 15 to 40 mm dia G.I. pipe including stacking of

37 14.84 dismantled pipes (within 50 metres lead) as per direction of

Engineerin-Charge.

(a) Internal Work- Exposed on wall 469.00 m 2.85 1337.00

Taking out existing wooden door shutter, repair by cutting,

painting etc. and refixing of repaired door shutters to existing

door frames, including replacement of hinges with screws,

etc. as required, all complete as per the direction of the

Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical

means including disposal of material within 50 metres lead as

per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design

Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of unserviceable

material within 50 metres lead as per direction of Engineer -

Extra for cutting reinforcement bars manually/ by mechanical

means in R.C.C. or R.B. work (Payment shall be made on the

cross sectional area of R.C.C. or R.B. work) as per direction of

Engineer in-charge.

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction

of Engineer-in-charge..

Dismantling doors, windows and clerestory windows (steel or

wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead :

43.1 15.12.2 Of area beyond 3 sq. metres 198.00 No. 414.55 82081.00

Dismantling steel work in single sections including

dismembering and stacking within 50 metres lead in:

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

44.2 15.17.2 Channels, angles, tees and flats 1201.00 Kg 1.90 2282.00

Dismantling tile work in floors and roofs laid in cement

45 15.23 mortar including stacking material within 50 metres lead.

45.1 15.23.1 For thickness of tiles 10 mm to 25 mm 985.00 Sqm 60.50 59593.00

45.2 15.23.2 For thickness of tiles above 25 mm and up to 40 mm 1561.00 Sqm 93.40 145797.00

Dismantling G.I. pipes (external work) including excavation

and refilling trenches after taking out the pipes, manually/ by

46 15.44 mechanical means including stacking of pipes within 50

metres lead as per direction of Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical

means breaking lead caulked joints, melting of lead and

making into blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of flushing cistern of all types (C.I./ PVC/

Vitreous China) including stacking of useful materials near

the site and disposal of unserviceable materials within 50

Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means,

including loading, transporting, unloading to approved

municipal dumping ground or as approved by Engineer-in-

charge, beyond 50 m initial lead, for all leads including all lifts

Painting road surface marking with adequate nos of coats to

give uniform finish with ready mixed road marking paint

conforming to IS : 164, on bituminous surface in white/yellow

shade, including cleaning the surface of all dirt, scales, oil,

grease and foreign material etc. complete.

50.1 16.48.2 Old work (One or more coats) 1015.00 Sqm 157.60 159964.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel plug

51 17.10 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

51.1 17.10.1 Kitchen sink with drain board

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

upto 1 metre long with S.S. triangular plate to Eureopean

type W.C. of quality and make as approved by Engineer - in -

Providing and fixing CP Brass 32mm size Bottle Trap of

53 17.22A approved quality & make and as per the direction of Engineer- 52.00 No. 886.25 46085.00

Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

54.1 17.28.1 Semi rigid pipe

Providing and fixing PTMT Waste Coupling for wash basin

and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm

breadth weighing not less than 45 gms.

Waste coupling 38 mm dia of 83 mm length and 77 mm

breadth, weighing not less than 60 gms.

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same

including testing of joints complete as per direction of

Engineer in Charge. :Concealed work, including cutting chases

and making good the walls etc.

53.1 18.8.1 15 mm nominal outer dia .Pipes. 241.00 m 441.15 106317.00

53.2 18.8.2 20 mm nominal outer dia .Pipes. 241.00 m 513.75 123814.00

53.3 18.8.3 25 mm nominal outer dia .Pipes. 121.00 m 626.05 75752.00

53.4 18.8.4 32 mm nominal outer dia .Pipes. 121.00 m 712.75 86243.00

Providing and fixing uplasticised PVC connection pipe with

54.1 18.21.2 45 cm length

Providing and making cast in-situ100mm wide POP

Cornice of approved design at the junction of

55 NS ceiling & walls including POP putty and screws 1801.00 rmt 295.00 531295.00

etc all complete as directed by

Banks Engineer as required at site.

Providing and making cast in situ pop false

ceiling with required g.i frame work ,g.i mesh and

56 NS finishing of same with pop in layers to 301.00 Sqm 2950.00 887950.00

achieve proper level /finishing as per site

requirement all complete.

Providing and applying pop punning on wall 5 mm

57 NS thick in proper line and level with required material 950.00 Sqm 295.00 280250.00

,t&p , labour etc. all complete

Supplying and fixing SS Curtain rod on door and

windows with required SS bracket. Rate also

58 NS include s/f end funnels /cap of approve design as 601.00 RMT 826.00 496426.00

per site requirement

upply & fixing of 18 mm HDMR ply of size 1500 mm X 1200

mm having set top box holder size 1200 mm X 200 mm

placed 100 mm from TV unit. All side with with 2mm

59 NS laminate of approved colour & provision of 6/16 Amp socket 61.00 Sqm 2600.00 158600.00

at top , Tv cable with switch plate. Two number of 6/16 Amp

socket with one control switch above set top box point as per

Providing and laying water proofing treatment in sunken

portion of WCs, bathroom etc., by applying cement slurry

mixed with water proofing cement compound consisting of

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/ sqm. This

layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed

with water proofing cement compound @ 0.126 kg/sqm. This

layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours.

(The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonry 301.00 Sqm 516.60 155497.00

with polymer mixed slurry.)

Providing and laying 60mm thick factory made cement

concrete paver block of approved shape and colour of M -30

grade made of C&D waste by block making machine with

61 26.72 vibratory compaction laid in required pattern and including 961.00 Sqm 757.00 727477.00

over 50mm thick compacted bed of coarse sand, filling the

joints with fine sand etc. all complete as per the direction of

Engineer-in-charge.

Providing and laying water proofing treatment on roofs of

62 22.6 slabs by applying cement slurry mixed with water proofing

cement compound consisting of applying:

(a) after surface preparation, first layer of slurry of cement @

0.488 kg/sqm mixed with water proofing cement compound

@ 0.253 kg/sqm.

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

(b) laying second layer of Fibre glass cloth when the first layer

is still green. Overlaps of joints of fibre cloth should not be

less than 10 cm.

(c) third layer of 1.5 mm thickness consisting of slurry of

cement @ 1.289 kg/sqm mixed with water proofing cement

compound @ 0.670 kg/sqm and coarse sand @ 1.289

kg/sqm. This will be allowed to air cure for 4 hours followed

by water curing for 48 hours. The entire treatment will be

taken upto 30 cm on parapet wall and tucked into groove in

parapet all around.

(d) fourth and final layer of brick tiling with cement mortar

(which will be paid for separately.

(For the purpose of measurement the entire treated surface

will be measured.)

Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable length (

total length 90 m), having 50 nos rounds per 6 metre length,

upto 3 m height of wall with existing angle iron 'Y' shaped

placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T.

reinforced barbed wire, stud tied with G.I. staples and G.I.

clips to retain horizontal, including necessary bolts or G.I.

barbed wire tied to angle iron, all complete as per direction

of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /

Spring core (2.5mm thick) wire of high tensile strength of 165

kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/

metre (cost of M.S. angle, C.C. blocks shall be paid

15 mm cement plaster on the rough side of single or half

brick wall of mix :

18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer

6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand)

finished rough with sponge.

Extra for providing and mixing water proofing material in

66 13.21 cement plaster work in proportion recommended by the 151.00 units 60.55 9143.00

Finishing walls with textured exterior paint of required shade

New work (Two or more coats applied @ 3.28 ltr/10 sqm)

68 13.45.1 over and including priming coat of exterior primer applied 1950.00 Sqm 245.00 477750.00

@2.20kg/10 sqm.

Dismantling old plaster or skirting raking out joints and

69 15.56 cleaning the surface for plaster including disposal of rubbish 1950.00 Sqm 45.05 87848.00

to the dumping ground within 50 metres lead.

Making groove of 10-12mm on joint of masonary work and

70 NS concrete work as per site condition & direction in charge 1950.00 RMT 11.00 21450.00

71 NS MODULAR KITCHEN WORK

Providing and fixing modular kitchen units for

the kitchen platform and top wall units to be fabricated

by using HDHMR board of thickness 18 mm for

making cabinets of required sizes to match with the

sizes SS kitchen jali units and size of the SS sink as per

following details :-

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Front bottom , top sides and shelf partitions of the

modular cabinets shall be of 18 mm thick HDHMR

boards of Mls Green panel Industries or approved

equivalent and back portion shall be of 8 mm thick

HDHMR board or approved equivalent with necessary

fittings , screws , pasting materials, finishing all exposed

cut surfaces with self adhesive PVC tape in matching

shade as that of laminate . The shutters and the pull

out units shall be fixed 50 mm above the kitchen floor

level . All the inner portions of the cabinets shall be

finished with 0.8 mm thick laminate of white colour and

approve make..The front face of the cabinet shall be

finished with1.0 mm ultra gloss laminate shade 21162

MR+ & 21069 MR+ Merino make The fittings like

handles , telescopic channels SS baskets , auto

closing hinges shall be paid separately under

respective items below . Quoted rates shall be inclusive

of labour , materials wastage scaffolding fixing

arrangements of top and bottom units with necessary

dash fasteners , repairing the damages, shifting the

debris out of colony , CP , taxes etc all as required for

the execution of the work . Note :- Only front elevation

area shall be measured for payment purpose.

a. Below platform units of depth 610 mm approx , 59.00 Sqm 29500.00 1740500.00

Top wall units of depth 300 mm approx. with shelves 44.00 21240.00 934560.00

Providing and fixing stainless steel baskets and

2 fittings , accesories of modular kitchen of Mls Hettich

or approved equivalent make as per below

mentioned details :-

a SS 304 cutlery baskets 15 x20 x4 inch 15.00 Each 2950.00 44250.00

b, SS 304 Plain basket 15 x20 x6 inch 15.00 Each 3540.00 53100.00

c SS 304 thali basket 15 x20 x8 inch 15.00 Each 5310.00 79650.00

d SS 304 plain baskets 19 x20 x4 inch 44.00 Each 3540.00 155760.00

e SS 304 plain basket 19 x20 x 6 inch 15.00 Each 4130.00 61950.00

f SS 304 plain basket 19x 20 x8 inch 30.00 Each 4720.00 141600.00

g SS baskets S —Corner basket 15.00 Each 9440.00 141600.00

h SS detergent pullout 15.00 Each 2360.00 35400.00

i SSdustbin ring 15.00 Each 1770.00 26550.00

Bottle Pull out basket set of width 9" with standard 15.00 8850.00

k SS Handle 12 inch size Basic price 400 188.00 No 590.00 110920.00

SS auto close hinges soft close of all variety of 174.00 708.00 123192.00

Hettich or approved make

m telescopic channels 20 " size Hettich 203.00 pair 885.00 179655.00

S/F Chimney 600 mm wide Zenith model Faber 15.00 29500.00 442500.00

make with vent pipe Basic price 22500

S/F granite kitchen sink 36 x18 x8 with drain

O board Emarald black model Hindware make 15.00 Each 21240.00 318600.00

Basic price 13500

Supply & fixing of safety Nets for stairwell of thickness

74 NS 2.5mm with mesh size 50 mm. Sample of the same will be 76.00 sqm 270.00 20520.00

approved by Engineer In charge

Supply & fixing of HDPE Twine Bird Nert/Pigeon net for

75 NS balcony Twine size 280D/15 ply , UV sablized Sample of the 410.00 sqm 270.00 110700.00

same will be approved by Engineer In charge

Removing the existing plumbing fixtures carefully and

stacking the reusable fixture at safe/designated place,

including dicardeding the unusable fixture after approval

from Engineer In Charge

82 NS Water Harvesting System

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

SITC of Rainwater Harvesting System as per Below

mentioned procedure : Pit excavation of 4x2x2

including boring of 300 dia of desired depth using

UPVC CM/RMS pipe 150 mm dia with MS/PVC Bail Plug

and MS/PVC End Cap, including preparation of base

structure, Splitting of Stone Aggregate 20mm nominal

Size/ Boulders 150mm, Jamuna sand layer 100 mm

thick, including Installation/laying of Non-Woven

Geotextiles 400 GSM in Double layer, Installation of

Modular cross waves layer (Recycled Polypropylene

made) Laying of Spacers on top Layer for making 1.00 Job 600000.00 600000.00

monolithic/interlocking structure, Wrapping & Welding

of Non-Woven Geotextiles, Providing and laying

Jamuna sand layer 50mm thick on top of Geotextile,

Refilling of Earth Excavation of Earth for Filter & Filter`

Chamber up to required depth Providing and laying

CC 1: 5: 10 & 1: 2: 4 as base for fixing of pure rain filters

Installation of pure rain filters FRP Based, Construction

of brick masonry silt chamber Interconnection of UPVC

Pipe with storm water drain and silt chamber, filter,

cross wave structure

Providing and laying in position cement concrete of specified

83 4.1 grade excluding the cost of centering and shuttering - All

work up to plinth level :

1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural

83.1 4.1.3 sources : 4 graded stone aggregate 20 mm nominal size 7.00 Cum 7365.15 51556.00

derived from natural sources)

Centering and shuttering including strutting, propping etc.

and removal of form work for :

Retaining walls, return walls, walls (any thickness) including

84.2 4.3.2 attached pilasters, buttresses, plinth and string courses fillets, 61.00 Sqm 702.00 42822.00

kerbs and steps etc..

Reinforced cement concrete work in walls (any thickness),

including attached pilasters, buttresses, plinth and string

courses, fillets, columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level, excluding

cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from

85.1 5.2.2 natural sources : 3 graded stone aggregate 20 mm nominal 7.00 Cum 10185.05 71295.00

sizederived from natural sources)

5.22 Steel reinforcement for R.C.C. work including straightening,

86 cutting, bending, placing in position and binding all complete

upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing of GI chicken wire mesh 24 gauge & 12

mm mesh and 300 mm width for construction joints and

87 chansing in brick work for electrical conduits or water supply 301.00 sqm 250.00 75250.00

pipes , brick work & concrete joints including cement slurry

and pegs /nails as required before plastering etc complete.

Providing and laying flamed finish Granite stone

flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete

as per the architectural drawings with 18 mm thick

stone slab over 20 mm (average) thick base of cement

11.55 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-

Flamed finish granite stone slab Jet Black, Cherry Red,

Elite Brown, Cat Eye or equivalent.

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

Providing and laying in situ seven course water

proofing treatment with APP (Atactic Polypropylene)

modified Polymeric membrane over roof consisting of

first coat of bitumen primer @ 0.40 litre per sqm, 2nd,

4th & 6th courses of bonding material @ 1.20 kg/sqm,

which shall consist of blown type bitumen of grade

14.88 85/25 conforming to IS : 702, 3rd and 5th layers of

roofing membrane APP modified Polymeric membrane

2.0 mm thick of 3.00 Kg/sqm weight consisting of five

layers prefabricated with centre core as 100 micron

HMHDPE film sandwiched on both sides with polymeric

mix and the polymeric mix is protected on both side

with 20 micron HMHDPE film.

7th, the top most layer shall be finished with brick tiles

of class designation 10 grouted with cement mortar 1:3

(1 cement : 3 fine sand) mixed with 2% integral water

proofing compound by weight of cement over a 12 410 sqm 732.75 300428.00

mm layer of cement mortar 1:3 ( 1 cement : 3 fine

sand) and finished neat (item of laying brick tiles shall

be paid for separately).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate) finished with a

11.3 floating coat of neat cement, including cement slurry,

but excluding the cost of nosing of steps etc.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate 410 sqm 545.00 223450.00

Providing and fixing Heat Resistant Terrace Tiles (300

mm x 300 mm x 20 mm) with SRI (solar refractive index)

> 78, solar reflection > 0.70 and initial emittance > 0.75

on waterproof and sloped surface of terrace, laid on 20

mm thick cement sand mortar in the ratio of 1:4 (1

12.55 cement : 4 coarse sand) and grouting the joints with 410 sqm 1,444.90 592409.00

mix of white cement & marble powder in ratio of 1:1,

including rubbing and polishing of the surface upto 3

cuts complete, including providing skirting upto 150

mm height along the parapet walls in the same

Three track three panels sliding window with fly proof SS

wire mesh (Two nos. glazed & one no. wire mesh

panels) made of (small series) frame 92 x 44 mm & sash

32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm

and single glazing bead of appropriate dimension

(Area of window upto 1.75 sqm).

Casement window single panel with S.S. friction hinges

(300 x 19 x 1.9 mm), made of (small series) frame 47 x 50

mm & sash 47 x 68 mm both having wall thickness of

1.9 ± 0.2 mm and single glass pane glazing bead of

appropriate dimension. (Area of window upto 0.75

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately). Second

class teak wood

Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) decorative type, core of

block board construction with frame of 1st class hard

wood and well matched teak three ply veneering with

vertical grains or cross bands and face veneers on

both faces of shutters. 35 mm thick Fixing with hinges of

required size and necessary screws (Note: Hinges and

necessary screws hall be paid separately

Providing and fixing bright finished brass 100 mm

mortice latch with one dead bolt and a pair of lever

9.77 handles of approved quality with necessary screws etc. 120.00 Nos. 603.40 72408.00

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Rate (Rs) DSR Amount(Rs)

MORTICE LOCK AND LEVER HANDLES- Providing and

installing Tubular Handle TH 123 with Roses &

Escutcheon in SS packaged with Mortice lockset 55mm 120.00 Nos. 2,894.00 347280.00

backset, 20 SS forend, SS strike plate and EP Cylinder for

NS all flush doors.

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked,

18.48 with cover and suitable locking arrangement and 50,000.00 per litre 9.70 485000.00

making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

SITC of SS-304 Steel Safety Main door, with inetrnal SS-

NS 304 Mosquito Mesh, with heavy duty interlock

Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth

level up to floor V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 5.00 Cum 8512.10 42561.00

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 20.00 Cum 8288.35 165767.00

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Supplying and fixing looking mirror of 5 mm thick looking glass with bevelled

edges and holes as per site requirement of Modi Gaurd or other approved equivalent

Rates are inclusive of fixing of glass with SS stud all complete as directed by

Engineer Incharge

Providing and fixing in position Jaguar (Item Code no. ACN:1111 NM) or other

approved equivalent quality Towel rod of 24" length with brackets fixed over tiles

with rowel plug and approved quality screws including cutting and making good

Providing and fixing in position Jaguar (Item Code no. ACN:1121) or other

approved equivalent quality Towel ring fixed over tiles with rowel plug and

approved quality screws including cutting and making good the

damages of tiles etc. all complete as required at site as directed by the Engineer-in-

Providing and fixing in position Chlorinated Poly Vinyl Chloride (CPVC) pipe SD-

11 of approved make in desired thickness having thermal stability for hot and cold

water supply of including all CPVC plain & brass threaded approved fittings and

fixing the pipe with clamps & screws as per the site requirements

at 1.00 meter C/C etc. all complete.

(a) 20mm nominal dia Rmt 1440.00 472.00 679680.00

(b) 40 mm Nominal dia Rmt 160.00 590.00 94400.00

c) 65 mm dia pvc pipe with fitting Rmt 192.00 590.00 113280.00

d)15. mm dia brass ball valve in kitchen shaft No. 32.00 1180.00 37760.00

Supplying and fixing position the following approved make fittings & fixtures,

B/5 including carefully removing the existing old/damaged fittings & fixtures and

handing over the same

15mm dia. C.P. Brass Pillar Cock with CP

(i) flange of continental series of Hinddware or other approved equivalent make. Each 32.00 1239.00 39648.00

15 mm dia. C.P. Brass bib cock with nozzle wall CP. flange of approved equivalent

15 mm dia. C.P angle valve with wall CP. flange of continental series of Jaquar

approved equivalent make. VGP-CHR-81053

15 mm dia. C.P. Brass central hole single lever wash basin mixer of Jaquar Model

VGP- CHR—81005N B or other approved equivalent make including plumbing

fittings and 450 mm long braided hoses etc. all complete as required at site.

15 mm dia. C.P. 4 way high flow single lever divertor with cover plate ,c.p pin .

Including all plumbing fittings& fixtures etc all complete as required at site as

directed by ENGINEER IN CHARGE . Model ALD-CHR -079N & VGP— CHR-81083

15 mm dia C.P spout of approve design with C.P Handshower and c.p flexible

(vi) tube of required length Jaquar make Model SPJ-CHR- No. 64.00 6490.00 415360.00

81463 ,HSH-CHR-35537

C.P Overhead shower 150 X150 mm with 450 mm long C.P Shower Arm Jaquar

Model OHS- CHR-1605

100mm dia. Heavy quality stainless steel Jali (grating) with or without holes for

(viii) waste pipe of floor / Nahani trap etc all complete as required at site as directed by Each 128.00 177.00 22656.00

Engineer In charge

Heavy quality CP Soap dish of Jaquar (codeno:ACN: 1131N) or approved

equivalent make.

15 mm dia .C.P brass two way bib cock model no. FUS-CHR-29041 with hand shower

(health faucet) model no. ALD-CH R-585 with flange of Jaquar or approved

equivalent make etc all complete as required at site as directed by the Engineer-in-

15 mm dia. C.P brass conceled stop cock with upper body plate Jaquar make

Model VGP—CHR-81083K

Providing and fixing glass shelf of Jaguar make [Code No. CAN -1171N] including

bracket etc. all complete as directed by ENGINEER IN CHARGE.

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Providing and fixing table mounted sink mixture model no.FLR-CHR-5179B

xiv S/F 450 mm long pvc connection Each 256.00 177.00 45312.00

Providing & fixing in position Hindware, Parry ware or other approved make

1st quality vitreous china glazed wall mounted European WC of standard size with

B/6 either P trap as per site requirement and providing & fixing conceled cistern Each 32.00 24780.00 792960.00

with required material ,labour etc i/c cover plate all complete Model Enigma Hindware

Same as above but using extended wall mounted model with cistern

complete set Model Enigma with cistern Hindware

Providing and fixing in position 100 mm dia. and 75mm outlet pvc Nahani/ floor

trap having seal of 40 mm to 50mm, approved equivalent ISI mark having necessary

B/7 length of extension pipe wherever required including cutting of concrete and Each 64.00 885.00 56640.00

repairing with concrete after completion all complete.

Supplying and fixing table top square washbasin 40x40 cm of Jaquar

approve model with c.p waste coupling and heavy duty waste pipe all complete as

required at site as directed by Engineer-in-Charge.Model JDS- WHT-25911

Carefully removing the existing wash basin along with all accessories & fixing of 1st

quality centre hole white vitreous wash hand basin of size: 550 mm x 400 mm

[approx.] of Hindware, Parryware, or any other approved equivalent make with a

B/9 pair of C.I. / M.S brackets, 32mm dia C.P. waste coupling of premium quality, Each 32.00 4130.00 132160.00

connections pipes ,waste pipe etc. of Jaquar or other approved equivalent make

including providing and fixing in position the required length 40 mm diameter

CPVC waste pipe upto existing Nahani Trap etc all complete as required

Fabricating ,supplying and fixing Vanity of required size approx 30 x 20 inch

made up of 18 mm HDHMR board ,.8 mm laminate on all internal faces and 1.0mm

on shutter with auto closing hinges and fixing of same with fastner etc. Rate are

inclusive of s/f galaxy black granite on top of vanity and making of

moulding all complete.

Total Rs. 7963584.00

ELECTRICAL & ALLIED WORKS

S.No. 22EM Description of Item Quantity Unit Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

1 1.10 conduit, with modular switch, modular plate, suitable Gl box

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable Gl box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.12 recessed medium class PVC conduit along with 1 No. 4 sq. mm 1649.00 Metre 334.00 Metre 550766.00

FRLS PVC insulated copper conductor single core cable for loop

earthing as required.

Wiring for circuit/ submain wiring along with earth wire with

the following sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed medium class PVC

conduit as required.

1.14.1 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 629.00 Metre 233.00 Metre 146557.00

1.14.2 2 X2.5 sq. mm + 1X2.5 sq. mm earth wire 1037.00 Metre 275.00 Metre 285175.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 561.00 Metre 334.00 Metre 187374.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 289.00 Metre 439.00 Metre 126871.00

1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 1037.00 Metre 570.00 Metre 591090.00

Rewiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing surface/

recessed steel/PVC conduit including dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable and 1.5 sq.mm

6 1.16 FRLS PVC insulated copper conductor single core cable as earth 51.00 Point 894.00 Point 45594.00

wire in existing surface/ recessed steel/PVC conduit including

dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated

copper conductor, single core cable in the existing surface/

recessed steel/ PVC conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

9 1.19 copper braid and protected with PVC sheath in the existing 697.00 Metre 47.00 Metre 32759.00

surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along

with accessories in surface/recess including painting in case of

10 1.20 surface conduit, or cutting the wall and making good the same

in case of recessed conduit as required.

ELECTRICAL & ALLIED WORKS

S.No. 22EM Description of Item Quantity Unit Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

switch, connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

13 1.32 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A 221.00 No. 586.00 Each 129506.00

modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase,

V, complete as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

15 1.51 existing surface/ recessed Steel/ PVC conduit as required.

1.51.1 1 run of cable 357.00 Metre 57.00 Metre 20349.00

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

16 1.55 conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to

be used in non residential buildings).

Supplying & fixing suitable size Gl box with modular plate and

cover in fronton surface or in recess including providing and

17 1.57 fixing 25 A modular socket outlet and 25 A modular SP MCB, 85.00 No. 727.00 Each 61795.00

"C" curve including connections, painting etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/lsolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

19 2.10.1 following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

a) Single pole 255.00 No. 256.00 Each 65280.00

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

20 2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single

red colour on front side as required.

ELECTRICAL & ALLIED WORKS

S.No. 22EM Description of Item Quantity Unit Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Providing and fixing H.T. danger notice plate of 250 mm X 200

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single

red colour on front side as required.

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure with

23 5.2 cover plate having locking arrangement and watering pipe etc. 17.00 No. 6855.00 Each 116535.00

with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm

thick including accessories, and providing masonry enclosure

24 5.6 with cover plate having locking arrangement and watering pipe 17.00 Set 13838.00 Set 235246.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.l. wire at 0.50 metre below

ground level for conductor earth electrode, including

connection/ termination with Gl thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre

below ground as strip earth electrode, including connection/

terminating with nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of brass

nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia

G.l. pipe from earth electrode including connection with brass

nut, bolt, spring, washer excavation and re-filling etc. as

Providing and fixing 25 mm X 5 mm copper strip on surface or

in recess for connections etc. as required.

Service of Installed capacity of transformer including

dehydration, reapir of any leakage, painting, replacing bushing,

terminal block , making out out 11 kv connection external

type,busing replacement, etc as required for per sit e condition

and direction of Engineer Incharge.

Service of Installed capacity of LT Distributioon panel

including dehydration, reapir of any damage aprts like door,

hinges, painting , replacing any switchgear, terminal block ,

making out out 440 kv connection external type, with required

cable, etc as required for per site condition and direction of

Engineer Incharge.

All above rates are including for getting NOC from Electrical,

pollution board, Lifts NOC, Fire NOC or any other type of

certification required from necessay from any department for

operation of Building .

ELECTRICAL FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Carefully disconnection and removing all fans, fittings, decorative lights, water

1 purifier, geysers, wires, conduits, casing capping , switch boards/ DB etc. in flat and JOB 15.00 5310.00 79650.00

keeping reusable items like exhaust fans ceiling/wall fans, LED batten water

purifier, geyser etc.

Supplying ,Fixing, testing and commissioning of following Electrical items with

necessary hardware

SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light on new

white colour square PVC block and using two/three core copper conductor PVC

insulated preferably white colourcable from tube light fixture to ceiling rose as directed

by Engineer In Charge.

SITC of 48 inch BLDC Ceiling fan of approve shade with all

B necessary mounting accessories with step regulator To provide 3 mm thick Bakelite No 119.00 2950.00 351050.00

round plate with required hardware near the ceiling fan hook.

PVC exhaust fan of 200MM size with pvc louver protection complete with

required fittings and hardware etc. and using two/three core copper conductor

PVC insulated preferably white colourcable from exhaust fan to ceiling rose as directed

by Engineer In Charge.

SITC of 25 litre horizontal/vertical geyser i/c all necessary hardware material etc .all

3 15 watt LED PANEL

SITC of 15 watt LED panel light at entrance, balconies and kitchen

both surface and conceled type i/c connection and testing complete.

SITC OF 18/20 Watt LED light on ceiling with required

hardware material all complete (Dinning room)

SITC of cabin fan 12 inch size on ceiling bwith required material

.Crompton ,Havells make

4 SITC of fancy fittings of approve model Philips make No 204.00 5900.00 1203600.00

5 LED tube light 17.00

10 Watt 2 ft led fitting, White Colour No 68.00 354.00 24072.00

Total Rs 3299870.00

Digitally signed by SANJAY

STREET LIGHT WORKS

S.No Items Quantiy Unit Rate Amount

Fabrication, supply & erection of Supply Of 4mtr

Decorative Pole Decorative pole made of galvanised Mild

steel pipes fitted with cast aluminum, embellishments

duly polyurethane paint coated.

Top Dia 76.1, Bottom Dia 114.3, Base Plate

250x250x12mm on existing cement concrete pedestal as

required i/c supplying and fixing of the following in the

window box provided for cable termination:-

a) Supplying and fixing 6mm thick laminated mounted

sheet inside the window mounted on and i/c providing

and welding 3 nos. G.I. strips 4mm thick of suitable

length and having suitable size tapped holes - 10 nos. as

b) Supplying and fixing of 63 Amp terminal block suitable

for 25 Sq.mm conductor - 4 nos. & shorting links - 5 Nos.

on DIN channel i/c pdg. And fixing DIN channel of

suitable length - 2 Nos. on the existing laminated sheet.

c) Supplying and fixing 6 Amp SPMCB, 10 KA'C' 12 Nos. Each 13280 159360

Characteristics Curve - 2 Nos. earth stud 1 No. welded at

suitable height two nos. washers, springs washers & nuts

Providing and laying in position M-20 (1:2:4) reinforced

cement concrete foundation of size 600 mm (L) x 600 mm

(W) and 1500 mm (D) i/c excavation of earth, providing

cutting, bending and placing in position, reinforcement

TMT bars of 12 mm dia -1600 mm long (approx)-8 nos.

and reinforcement ring of cold twisted bar of 8 mm dia -

2800 mm (approx) - 10 nos.(with 150 mm spacing) as

required with positioning of foundation bolts (as per item

below and) and providing 90 mm (O.D.) DWC, HPDE pipe

for cable entry and exit as reqd.

3 Supplying and fixing 4 Nos. 25mm dia X 700mm long Gl

foundation bolt (EN8 grade) with nuts. washer including 2

Nos. template of 4mm thick size 225 x 225 mm with 4

nos. 25 mm dia holes, to match with PCD of Pole base

Supplying,Installation,testing and commissioning of 45

watt LED Lights Decorative post top lantern made of cast

aluminium housing fitted with poly carbonate cover.

operatable in voltage range of 140-270V .

Supplying and drawing following size of PVC insultated

copper conductor multicore cable in the existing poles and

bracket from cable termination connector to the fitting i/c 12 job each job 150 1800

providing suitable copper lugs connectins etc as required

a) 3 core 1.5 sq.mm (For 7 mtr pole)

Supplying and laying of following size DWC HDPE pipe ISI

marked along with all accessories like socket, bend,

couplers etc. conforming to IS 14930, Part II complete

with fitting and cutting, jointing etc..direct in ground (75 0

cm below ground level) including excavation and refiling

the trench but excluding sand cushioning and protective

covering etc complete as required.

STREET LIGHT WORKS

S.No Items Quantiy Unit Rate Amount

a) 63 mm dia (OD-63 mm & ID-51 mm nominal) 300 meter meter 250 75000

7 Supplying and Laying with end termination of XLPE ISI

Marked, Alumunium conductor arnoured cable in the 0

existing pipe as required

a) 4 x 16 sq.mm (From sub statio to feeder pillar) 25 meter meter 250 6250

Supplying and laying with end termination of following

sizes of XLPE Insulated PVC Sheathed Armoured Electric

Cables with Aluminium Conductor for Working Voltage 0

1.1 KV conforming to IS:7098 (Part-1)/ IS:1554 (Part-1)

complete etc as required.

9 SITC on wall FRP type water, weather and shock proof

junction box of approximate size 150 x200 x 100mm,

front openable and locable type and providing and fixing

16 amp terminal block suitable for 6 Sq.mm conductor - 4

nos and DIN channel of suitable length - 2 nos., 6 amp

SPMCB 10 KA 'C" characteristics curve - 2 nos., earth

stud 1 nos. 2 nos. washer, spring washer and nuts etc as

10 Providing and fixing 6 SWG dia G.I wire on surface or in

recess for loop earthing along with existing

surface/recessed conduit/submain wiring/cable as

11 Earthing with GI earth pipe 4.5mtr long x 40mm dia

including accessories & providing masonary enclosure

with cover plate having locking arrangement with salt

&charcoal etc. as required.

SITC of Mushroom flat top, environmental friendly sleek

energy efficient garden luminaire, symmetrical light

distribution having following technical specifications

including making suitable height robust cement concrete

foundation having provision for cable entry and

connection for bollard etc., as required.

Technical Specications

Luminaire made of Hot dip galvanised with die-cast

aluminium components and non corrosive SS fasteners.

High efciency translucent acrylic diffuser for glare free,

uniform light distribution.

GI mounting plate for bolting onto a foundation.

Luminaire can be aligned on the mounting plate around

Cable entries for through-wiring of mains supply cable

(max. 3 x 0.5 Sqmm)

Integral power supply

Earth connection

Protection class IP 54

Suitable for operation on 240V, 50Hz single phase ac

Cool White (6000-6200K), Warm White (2700-3000K)

Hot dip galvanised mounting plate with three GI steel

square head coach screws.

STREET LIGHT WORKS

S.No Items Quantiy Unit Rate Amount

Supplying,Installation,testing and commissioning of 45

watt LED Lights Decorative post top lantern made of cast

aluminium housing fitted with poly carbonate cover.

operatable in voltage range of 140-270V .

Total Rs 765606.000

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

S.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

Supplying, installation, testing & commissioning of

smoke detector with builtin LED and mounting base

1 17.1.2 complete with all connections etc. as required. 10.00 No. 1153.00 Each 11530.00

Supplying, installation, testing & commissioning of

manual call boxes of MS construction in

2 17.1.3 surface/recess with stainless steel chain & hammer 10.00 No. 474.00 Each 4740.00

assembly complete with glass and push button etc.

Supplying, installation, testing & commissioning

response indicator on surface/recess MS box having

3 17.1.5 two LEDs metallic cover complete with all 10.00 No. 196.00 Each 1960.00

connections etc. as required.

Supplying, installation, testing & commissioning fire

alarm sounder with facility to make announcement,

mounted in M.S. box (16 SWG) with hinged cover

plate & suitable for operation with amplifier i/c line

matching transformer etc. complete as required.

Supplying, installation, testing & commissioning talk

back slave station in surface/recess suitable for

operation on simplex mode complete with P.T.T.

5 17.1.8 knob & speaker/microphone enclosed in a M.S.(16 1.00 No. 905.00 Each 905.00

SWG)/ ABS box with break glass in front etc.

complete as required.

Supplying, installation, testing & commissioning

sector panel suitable for following zones, complete

with visual indications for short circuit fault, open

circuit fault, fire condition and all other standard

facilities as per IS:2189 with mimic diagram for all

area/zone covered, complete with all connections,

interconnections as required.

Supplying, installation, testing & commissioning of

main control and indicating panel made out of 16

SWG MS sheet to accommodate the following items

duly powder coated in approved colour with louvers

for ventilation, locking arrangement, audio and

visual indication for fire alarm and public address

system, monitoring system including connections,

interconnections etc complete as required.

a) 10 Zone panel for fire alarm system

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

S.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

b) 250 Watt amplifier racks suitable for operation

on 230V AC/24V DC supply conforming to IEC-268-3

complete with all accessories as required - 2

Nos.(one to act as standby)

c) Talk back master station with LED PTT (press to

talk) push button for operation on 230V AC/24 V DC

supply conforming to I EC-268 for simplex mode of

operation/communication suitable for 20 Nos.talk

back unit -1 set.

d) Annoucement control desk suitable for selection

of different zones selectively and ON ALL CALL

switch with visual indication etc. complete as

required -1 set.

e) Amplifier change over switch for inter changing

amplifier -1 No.

f) Monitor panel for loudspeaker complete with

output selector, ON/OFF switch, fuse, visual

indications etc. complete as required-1 No.

g) Gooseneck microphone with stand and ON/OFF

h) Main ON/OFF switch, fuse indication lamps, DC

and AC voltmeters & ammeters, terminal blocks etc.

complete as required -1 set.

i) Battery charger trickle cum boost to take

complete load of fire alarm & PA system complete

with all accessories including providing & fixing of 2 1.00 No. 70389.00 Each 70389.00

nos.12 volt, 60 AH each sealed maintenance free

batteries-1 set.

Supplying & laying of 2x1.5 sqmm fire alarm

armoured cable, 600/1000V rated with annealed

8 17.5.2 copper conductor having XLPE insulation, steel wire 500.00 Metre 173.00 Metre 86500.00

armouring & ERLS outer sheath complete as

All above rates are including for getting NOC from

Electrical, pollution board, Lifts NOC, Fire NOC or

NOTE any other type of certification required from

necessay from any department for operation of

Total Rs. 190460.00

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Supplying, installation, testing and

commissioning of Electric driven Main Fire

Pump suitable for automatic operation and

consisting of following, complete in all

respects, as required :

(a) Horizontal type, multistage, centrifugal,

split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical

seal conforming to IS 1520.

(b) Suitable HP Squirrel cage induction motor,

TEFC, synchronous speed 1500 RPM, suitable

for operation on 415 volts, 3 phase 50 Hz, AC

supply with IP 55 protection for enclosure,

horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate,

coupling, coupling guard, foundation bolts

etc. as required.

(d) Suitable cement concrete foundation duly

plastered with anti vibration pads.

Note: *The head of the pump is selected in a

manner so as to give a minimum 3.5kgf/cm2

pressure at the highest/farthest point.

Supplying, installation, testing and

commissioning of electric driven

pressurisation pump suitable for automatic

operation and consisting of following,

complete in all respects, as required : (Jockey

Horizontal type, multistage, centrifugal pump

of cast iron body and bronze impeller with

stainless steel shaft, mechanical seal

conforming to IS : 1520.

3 Suitable HP squirell cage induction motor

TEFC type suitable for operation on 415 volts,

3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot

mounted type with Class-'F' insulation,

conforming to IS : 325.

M.S.fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as

required. Suitable cement concrete

foundation duly plastered and with anti

vibration pads.

Supplying, installation, testing and

commissioning of electric driven terrace

pump suitable for automatic operation and

consisting of following, complete in all

respects, as required: (Terrace Pump)

a) Horizontal type, multistage, centrifugal,

split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical

confirming to IS : 1520

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit

Amount(Rs) Amount(Rs)

b) Suitable HP squirell cage induction motor

4 TEFC type suitable for operation on 415 volts,

3 phase, 50 Hz, AC supply with IP55 class of

protection for enclosure, horiziontal foot

mounted type with Class-'F' insulation,

conforming to IS-325.

c) M.S.fabricated common base plate,

coupling, coupling guard, foundation bolts

etc.as required.

d) Suitable cement concrete foundation duly

plastered and with anti vibration pads.

e) Suitable starter panel integrated with fire

Fabrication, supply, Insallation testing &

commissioning of Electrical control panel of

cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated

of approved shade after 7 tank treatment

process, cable alley, inter- connection with

suitable size copper conductor cable/solid

copper strip, having switchgears and

accessories, mountings and internal wiring,

earth terminals, numbering etc. complete in

all respect, suitable for main fire pump,

pressurisation pump & diesel pump set

complete as per CPWD specification with

following in coming and Outgoings, suitable

for operation on 415V, 3 phase, 50Hz Ac

Supply with enclosure protection class IP 42

250A, 50kA 4 Pole MCCB, Ics=100% Icu rating

Digital Voltmeter 0-500V with selector switch

Digital Ammeter (0-250 A) with selector

swtich & CTs etc.

LED type RYB phase indicating lamps, ON,

OFF, trip indicating lamps Set of Copper Bus

( Note : All outgoing feeders for pumps should

have digital Ammeter with selector switches,

and LED type ON, OFF, trip indicating lamps)

5 18.5.1 125 A, 50kA TPN MCCB, Ics=100% Icu, with

fully automatic Star/Delta starter suitable for

60 HP pump with overload protection, current

sensing type single phase preventor complete

with all acceessories and internal wiring

required for automatic operation, selector

switch for local/remote, auto/manual/OFF

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit

Amount(Rs) Amount(Rs)

63 A, 50kA TPN MCCB, Ics=100% Icu, with

suitable HP fully automatic Star/Delta starter

with overload protection, current sensing

type single phase preventor complete with all

acceessories and internal wiring required for

automatic operation, selector switch for

local/remote, auto/manual/OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -

Automatic/ Manual selctor switch & 3

attempts starting device, timers and relays as

required, push buttons, start/stop in manual

Indicating lamp for high/ Low Lub. Oil

pressure, High Water Temp and Engine on

Battery charger suitbale for 12V/24 V DC with

boost and trickle selector switch, 0-30 V DC

volt meter, and 0- 20 A DC Ammeter

All standard relays and accessories for

automatic operation of diesel engine.

System Controller 1.00 Set 245730.00 Set 245730.00

PIPES & ACCESSORIES

Providing, laying, testing & commissioning of

'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support

frame and painting with two or more coats of

synthetic enamel paint of required shade

complete as required in ground with coating

and wraping as per site condition :

Providing, laying, testing & commissioning of

'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support

frame and painting with two or more coats of

synthetic enamel paint of required shade

complete as required :

Providing, laying, testing & commissioning of

'B' class heavy duty G.I. pipe conforming to IS

1239 including welding, fittings like elbows,

tees, flanges, tapers, nuts, bolts, gaskets etc.

and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting

with two or more coats of synthetic enamel

paint of required shade complete as required

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Supplying and fixing Single headed external

yard /internal hydrant valve with 1 No. 63

mm dia instantaneous FM Gunmetal/Stainless

Steel coupling and cast iron wheel, ISI

marked, conforming to IS 5290 (type A) with

blank Gunmetal/Stainless Steel cap and chain

18.10.2 Single headed Stainless steel 14.00 Set 6139.00 Set 85946.00

Supplying, fixing, testing and commissioning

of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as

Supplying, fixing, testing & commissioning of

double flanged sluice valve of rating PN 1.6

with non rising spindle, bronze/gun metal

seat, ISI marked complete with nuts, bolts,

washers, gaskets and conforming to IS 780 of

following sizes as required :

18.13 Supplying and fixing orifice plate made out of

6 mm thick stainless steel (Grade 304) with

orifice of required size to be fitted between

flange & landing valve of external and internal 14.00 No. 1321.00 Each 18494.00

hydrants to reduce pressure at the outlet to

the level of 3.5 kg/cm2 complete as required.

18.14 Providing, installation, testing and

commissioning of non-return valve of

following sizes confirming to IS: 5312

complete with rubber gasket, GI bolts, nuts,

washers etc.as required :

Providing, installation, testing and

commissioning of stainless steel Y-strainer

fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia holes with

stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long

RRL hose pipe with 63 mm dia male and

female couplings duly bound with GI wire,

rivets etc. conforming to IS 636 (type-A) as

18.16.2 Stainless Steel (Grade 304) 28.00 Set 4448.00 Set 124544.00

18.17 Supplying and fixing first-aid Hose Reel with

MS construction spray painted in post office

red, conforming to IS 884 complete with the

following as required. 20 mm nominal

internal dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585 20 mm

nominal internal dia gun metal globe valve &

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Drum and brackets for fixing the equipmets

on wall. Connections from riser with 25 mm

dia stop gun metal valve & M.S. Pipe and

Supplying & fixing 63 mm dia gun metal short

branch pipe with 20 mm nominal internal

diameter size nozzle conforming to IS 903

suitable for instantaneous connection to

interconnect hose pipe coupling as required :

18.18.2 Stainless Steel (Grade 304) 14.00 Nos. 1662.00 Nos. 23268.00

Supplying and fixing of fire brigade

connection of cast iron body with gun metal

male instantaneous inlet couplings complete

with cap and chain as reqd. for suitable dia

MS pipe connection conforming to IS 904 as

18.20 Supplying and fixing air vessel made of 250

mm dia, 8 mm thick MS sheet, 1200 mm in

height with air release valve on top and

flanged connection to riser, drain

arrangement with 25 mm dia gun metal 1.00 Set 18244.00 Set 18244.00

wheel valve with required accessories,

pressure gauge and paintingwith synthetic

enamel paint of approved shade as required.

18.22 Providing & fixing of pressure switch in M.S.

pipe line including connection etc. as 4.00 No. 1546.00 Each 6184.00

Providing & fixing flow switch in following

sizes M.S. pipe including connection etc as

Supply & fixing double flanged flexicon

rubber expansion joint with unit control of

standard length as per OEM specs. Tested to

pressure of 15 kg/sqcm including rubber

gaskets, flanges, nuts, bolts and washers

complete as required.

Supply & fixing of hose cabinet of size 750

mm X 600 mmX 250 mm made of 1.6 mm

thick MS sheet with 6 mm thick glazed glass

door including necessary locking arrangement

suitable to accommodate external hydrant

with butterfly valve , 2 nos. 15 mtrs hose pipe,

NS 1 branch pipe, axe, mounted on wall or raised 8.00 Set 5249.00 Set 41992.00

brick platform & duly painted with post office

red externally and white internally with

synthetic enamel paint complete in all respect

for external hydrant as required as per site

Supply & fixing of hose cabinet of size 0.9 M

Wide X 1.8 M height indoor hose cabinet

shutter made of MS sheet with 6 mm thick

glazed glass door including necessary locking

arrangement suitable to accommodate

internal hydrant with butterfly valve , 2

nos.RRL hose pipe, 1 branch pipe, axe, duly

painted with post office red externally and

white internally with synthetic enamel paint

complete in all respect for external hydrant as

required as per site condition.

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit

Amount(Rs) Amount(Rs)

Supply & fixing of Fire Man Axe with heavy

insulated rubber tersted upto 20 KV and

confriming to IS 926 as required as per site

Supply & fixing fire extinguisher as per IS

4.5 kg CO2 gas filling ration not more than

NS 6 KG ABC type 14.00 Set 4920.00 Set 68880.00

SITC of automatic starter for water lifting

from sump to terrace having all type of

protection and auto start on low level of

water and auto stop on over flow of water up

to 5 KW pump including necessary control

wring from tank to starter/pump atc

complete in all respect as site condition.

Supply & fixing of MS structureal work

fabricated from standard sections for

NS hangers, supports clamps as per site 200.00 kg 142.20 kg 28440.00

conditions and direction of Engineer In charge

SITC of emegency light with built in battery

NS for 1 hrs back upto 5 watt in common area 20.00 Nos. 3000.00 Nos. 60000.00

SITC of emegency self glow signages as per

SITC of Electrcial SIDBI SIGN Board as per

direction Engineer Incharge

SITC of SIDBI SIGN Board as per direction

Engineer Incharge

Supply & fixing of resilient rubber neoprene

lined style arch vibration eleimatiors suitable

for raw water upto pressure 20 kg/sq cm 80

Supply & fixing of pressure switches for main,

jockey and stand by deisel pumps, including

necessary wiring upto control panel and ball

Supply & fixing of 100 mm dia bourden type,

ss dial type pressure gauge (0-16 Kg) range,

8 NS 3/8 BSP button entery on pump delivery line 1.00 Set 825.00 Set 825.00

complete with ball valve

Supply & fixing of vane type water flow

switches with contacts for installation in 50

9 NS mm to 150 mm dia. MS pipe for a service 1.00 Set 4712.00 Set 4712.00

presuure up to 20 kg /sqcm

Supply & fixing of pressure transducer in MS

10 NS pipe line suitable for 12 Volts/24 volts DC 1.00 Set 3591.00 Set 3591.00

including connection etc as required

All above rates are including for getting NOC

from Electrical, pollution board, Lifts NOC,

Fire NOC or any other type of certification

NOTE required from necessay from any department

for operation of Building .

S.No. 22EM Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

SITC of 4MP 1/2.7" 4MP ps CMOS image sensor

(0.9407centimeter afax 5mp

2880x1620@ 20fps and support 2688x1520@25/30fps

stream H.265+ and

smart H.264 duel stream encoding DWDR. Day/night

ICR 3D NR,ROI,AWB,AGC,BLC,HLC3.6mm lens IR range

30Mtrs. IP67 POE, support

built in mic and mobile software ICMOB Software

Sitc of 64 ch 5mp input max 320mbps incoming

bandwidth instastream/H 265/smart H-264/MJPEG up

to 12 mp resolution preview and play back support

8sata HDD , 4usb ports (2usb3.0), 1 eSATA port 2HDMI

2 NS / 2 VGA simu- video output support multi brand 1.00 Set 58960.00 Set 58960.00

network cameras support RAID 0/1/5/10 Mobile

software , iCMOB gCMOB CMS SOFTWARE KVMS pro

3 NS SITC OF 16 port POE rack mountable 1.00 Set 12730.00 Set 12730.00

4 NS SITC OF 8 port POE rack mountable 1.00 Set 6700.00 Set 6700.00

6 NS SITC of 10TB servillance hard disk Drive 1.00 Set 34840.00 Set 34840.00

Supply and fixing of (32 inches ) Full HD LED Display TV

8 NS having display resolution of 1920x 1080 1.00 Set 34840.00 Set 34840.00

9 NS SITC of Network Rack 9U wall rack 1.00 Set 6432.00 Set 6432.00

Supply and laying of armoured UTP 4pair Cat6 cable

Supply and laying of HDPE rigid /flexible heavy conduit

Total Rs 226996.00

Digitally signed by SANJAY

LIGHTING ARESTOR ESE TYPE

S.No. Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

SITC of ESE type lighting arestor for radius 75-107

GI Mast Total 5 Mtr std mast reqd. for mounting the

terminal & adaptor to mount the Air Terminal with

Coupler/reducer, Multi strand stray wires, Joints, Clamps

Test Link Joint Kit in a IP 55 weather proof enclosure of

3 NS suitable dimension and approved make & design. 1.00 Set 3200.00 Set 3200.00

Lightning Strike recorder LSC 6 Digit shall be weather

proof type., It’s should have 6 digit event count and the

capacity to count smallest strike (3kA). It should be a

4 NS voltage sensing type counter, so that it will not register 2.00 Set 16800.00 Set 33600.00

nearby strikes and static discharges due to induction

Supply of UL Listed long life Maintenance Free Earthing

CO. BONDED - UL Listed, 10feet long 17.2 mm dia 250

Micron,with U Clamp.The BackFill , eco friendly, non

6 NS degradable and non soluble. The earthing pit shall be 1.00 Set 20000.00 Set 20000.00

designed and supplied with Poly-plastic Pit Cover non

conductive, environment friendly.

Recommended : 70 Sqr mm Copper Cable..lightning

8 NS current dissipation to earth with necessary Fixing Clamp, 70.00 RMT 1150.00 Set 80500.00

Connector accessories etc.

Installation & Commissioning price include Base plate

with base mast and accessories,

Total Rs 285100.00

Digitally signed by SANJAY

S.No. Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

OUT DOOR ACOUSTIC ENCLOSED CANOPY TYPE DG SET 40 KVA

1 NS CONSISTING OF FOLLOWING

Supply, receive, store, unpack at site, install, testing and

commissioning of Appropriate BHP prime rated diesel generating

set coupled to 40 KVA Alternator with Electronic Governor, 3 ph,

50 Hz, 415V, along with Radiator type of cooling and associated

2 NS equipment complete set including necessary appropriate

armoured cabling as specified in the technical specification and

civil works if required for proper installation of the D.G.Set

Built in AMF control panel with battery charger including

suitable isolator

4 NS AVM pads 'S' Type Kushi foot mounting with accessories

Residential Quality Silencer (Includes flexible coupling )

with cladding as per specification.

8 NS Fuel Tank

Supply and Installation of Batteries with stand with

initial charging.

10 NS Cable adopter box as per site requirement.

Power and control cabling, connection to existing

panels. Complete earthing system ( 2 nos each for

neutral and 2 for body) with earth pit and earthing strip

Exhaust pipes arrangements as required to suit conditions

and statutory requirements, if any

Buy back of existing DG Set along

with accessories in as is where is condition. Amount quoted

against this item shall be paid by the contractor

All above rates are including for getting NOC from Electrical,

pollution board, Lifts NOC, Fire NOC or any other type of

certification required from necessay from any department for

operation of Building .

Total Rs 897234.00

Digitally signed by SANJAY

S.No. Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

Supply, Installation, Testing and Commissioning of ongrid Solar

Photovoltaic Power Plant conforming to MNRE specifications as

amended, consisting of Mono/ Poly Crystalline silicon solar cells,

net metering facility, necessary protections, earthing, mounted on

Aluminium/ GI structure of suitable strength with following

components complete as required:-

a) Solar Photovoltaic Module of capacity 540Wp or above,

manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC

61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module

conversion efficiency shall not be less than 16.5%. PV modules

used in solar power plants/ systems must be warranted for their 18.00 Nos. 25001.46 Nos. 450026.00

output peak watt capacity, which should not be less than 90% at

the end of 10 years and 80% at the end of 25 years.

b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage

range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output

voltage suitable to generate AC Power with efficiency not less than

97%, total harmonic distortion less than 3% and suitable for

ambient temperature from 0 to 50 degree C. The PCU shall adjust

the voltage and frequency level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP 65

protection and termination arrangement for incoming and

outgoing cable along with glands, lugs and other accessories etc.

e) Lightning and surge voltage protection. f) Connections &

Interconnections by supplying & fixing required size XLPE insulated

copper conductor 1.1 kV grade armoured power and control

cables between solar modules, main power cable to grid supply

PCU unit along with supplying & fixing of necessary

channel/conduit lugs and other accessories etc. as required.

Solar hybrid power conditioning unit 20 KW 240 V ( 3Ph input 3ph

3 NS Solar Tall Tublar Battery C-10 Type12/V150 AH 20.00 Nos. 17742.38 Nos. 354848.00

Digitally signed by SANJAY

S.No. Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

Earthing, cabling and other accessories , minor civil works etc.

Supply & fixing of MS structureal work fabricated from standard

5 NS sections for hangers, supports clamps as per site conditions and 2000.00 kg 142.20 kg 284400.00

direction of Engineer In charge

All above rates are including for getting NOC from Electrical,

pollution board, Lifts NOC, Fire NOC or any other type of

certification required from necessay from any department for

operation of Building .

Total Rs. 1741839.00

Digitally signed by SANJAY

S.No. Heads Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

SITC OF G+5 LIFTS AS PER

APPROVED SPECIFICATION

Design, manufacture, supply, installation, testing,

commissioning, approvals (statutory or otherwise) and

handing over in satisfactory working conditions of 8

passenger Elevator, in shaft size of 1850mm(W) X

1900mm (D) complete as per specifications as required

1 Designation of Lifts Gearless Machine Room Lift

2 No. of Elevator 02

3 Type and Capacity 8 Passenger

4 Speed 1.0 m/s or more

6 Location of Machine Room Top of Shaft

7 Total Travel 21 mts (Approx)

8 Serving 06 Floors

9 No. of Stops 6

10 Wll Size 2000 mm (W) X 2034 mm (D)

11 Power Supply 415 V Three Phase 50 Cycles AC

12 Auxiliary Single Phase 220V 50 Cycles AC

13 Car Size 1600 mm (W) X 1500 mm (D)

14 Pit Depth 1600 mm

15 Head Room 6000 mm

16 CAR ENCLOSURE

Car Ceiling SS Hairline Finish or as approved

Car Panels SS Honeycomb Finish or as approved

Car Flooring PVC or as approved

Car Illumination LED

17 No. Of Entrance One location Front

Centre Opening Power Door in

18 Car Entrance Powder Coated

Full Height Infra-red safety curtains

19 Door Safety

Centre Opening Power Door in

20 Landing Entrance Powder Coated

21 Clear Opening

22 Control Full Collective Simplex

KDS 90 Full Height COP- Surface

Mounted Buttons-White LED

KDS 90 LCI- Surface Mounted

25 Landing Buttons-

The lift to have following minimum specifications/

features and/or as approved by the client.

a OEM Motor / Machine

2 Hr Fire rated (min) landing doors (Approved and

b certified by an Government Authority , Test Certificate

24/7 Connected Services (IOT Services) / Elevator 24/7

Real time data Monitoring by Cloud platform and pre-

analyze, Predict, maintain and take action before

equipment breakdown

d L.W.D ( Load Weighing Device )

e Car Door Mechanical Lock as standard (Safety Feature).

f Daily Automatic Brake Testing (Safety Feature).

g Automatic Phase Reversal

h Automatic Rescue Device (Safety Feature)

i Direction & Position Indicator In Car

j Emergency Alarm

k 2 Phase Fireman Drive

l Hands Free Press & Speak Intercom

m Full height infra red safety curtains

p Signal Fixtures In Stainless Steel Finish

q Emergency Light With Rechargeable Battery

r Adjustable Guide Shoes

s Micro Movement LED Based Buttons.

t +10% to -10% Volt. Fluct. Withstand Capacity 2.00 SET 1800000.00 SET 3600000.00

DISMENTALING OF EXISTING LIFTS

BUY BACK OF DISMENTALED LIFTS 2.00 LS -40000.00 LS -80000.00

Total Rs. 3560000.00

LANDSCAPE DEVELOPMENT

S.No. 22EM Description of Item Quantity Unit Rate (Rs) Unit Amount(Rs)

1 LANDSCAPE DEVELOPMENT

1 16.3 Supplying and stacking at site.

Supplying and stacking of well decayed cattle manure at site including

royalty and carriage upto 5 k.m.lead complete (Cattle manure measured

stacks will reduced by 8% for Payment).

Providing and Displaying Bougainvillea named variety, Sobhra, Thima,

palmar, Cherry Blossom etc. well developed with fresh & healthy bushy

full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the

officer-in-charge.

Providing and stacking winter seasonal seedlings/cuttings at site of work

4 10.1 well developed and healthy free from disease in per tray and each tray

having 100 Nos plants as per direction of the officer-in-charge.

Total Rs. 500000.00