SPECIAL REPAIRS TO TRANSMITTER, PAR BUILDING AND PROVISION OF CERTAIN MR MINOR WORKS AT AFS BIDAR

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc, complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15mm thick screed bed CM 1:6 complete all as specified and as directed.

Coloured glazed ceramic tiles in vertical surfaces such as skirting, dados and risers to steps etc., of size 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick backing coat CM 1:4 complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15mm thick screed bed CM 1:6 complete all as specified and as directed.

GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 15mm dia bore including taking down old steel tubing complete all as specified and as directed.

GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 20mm dia bore including taking down old steel tubing complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints laid in trenches complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia any radius with access door complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe complete all as specified and as directed.

S&F in repairs Grating doom 110mm dia of CP complete all as specified and as directed.

Stop valves 15mm bore, cast copper alloy screwd down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F PVC connection 600mm long of 15mm bore with PTMT nuts complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed.

S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a pair of angle iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3, complete all as specified and as directed

S&F in repairs Toilet paper Holder of chromium plated Glossy finish complete all as specified and as directed.

S&F Health Faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.2 m flexible tube & ABS wall hook complete all as specified and as directed. Make :- Jaquar model No. ALE-CHR 593 or equivalent model in Prayag / Cera / Seiko / Marc / Hindware

S&F in repairs 15mm dia two way Bib tap (2 in 1 type) of brass chromium plated, glossy finish complete all as specified and as directed. Make :- Jaquar model No. TQT- 512AN or equivalent model in Prayag / Cera / Seiko / Marc / Hindware

S&F in repairs Soap dish, brass chromium plated of suitable size, first quality, and fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all as specified and as directed.

Dismantling of wall and ceiling boards with frame work (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F False ceiling with anodized aluminium frame work with 605mm x 605mm size snap gird fixed with screws / staples using 36.5mm x 23.5mm x 1.5mm thick main tee, 23.5 x 23.5 x 1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and ‘J’ bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, complete all as specified and as directed.

S & F 12mm thick, mineral fibre board/ tiles, fixed in ceiling, flat or sloping complete all as specified and as directed.

Demolition of brick / PCC block / laterite masonry built in cement mortar or cement lime mortor including all quoins, arches, pillars etc., complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for roof / chajja / coping and similar work including removal of debris out side MD land complete all as specified and as directed.

Precast Cement concrete block masonry with solid blocks, type C1, 1:3:6 using 20 mm graded stone aggregate, exc 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone wall, or any description etc including, racking out joints, hacking for key scrubbing down with water etc. complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Complete removal of existing treatment and applying 1mm thick wall care putty and applying two coats of oil bound distemper over one coat of primer including and preparation of surfaces complete all as specified and as directed .

Preparation of newly plastered surfaces and applying 1mm thick wall care putty and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Complete removal of existing treatment on wall / ceiling surfaces and applying two or more coat of Acrylic smooth exterior paint of approved shade @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer 2.2 kg / 10 sqm complete all as specified and as directed .

Preparation of newly plastered surfaces of wall / ceiling surfaces and applying two or more coat of Acrylic smooth exterior paint of approved shade @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer 2.2 kg / 10 sqm complete all as specified and as directed .

Preparation of old decorated surfaces of ceilings including cornices pillars etc by washing, rubbing down stopping and applying one coat of Oil Bound Distemper (of approved shade) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified as directed.

Aluminium door shutters powder coated (minimum thickness of powder coating 50 micron), aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified as directed.

Aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron), side hung / sliding type without sash bars, aluminium sections weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified and as directed.

Sheet glass 5.5mm thick, ordinary quality and glazing in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

12mm thick prelaminated particle board interior grade, both side laminated with decorative choice, fixed with screws to timber frames work for shutters of ward robes, cabinets etc., complete all as specified and as directed.

S&F mortice lock brass 4 levers vertical type, size 100mm complete all as specified and as directed.

S & F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet, supplied and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed.

Factory made solid Panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and Plain colour sheet PVC for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail supplied and fixed as per SSR instructions complete all as specified and as directed.

Aluminum anodised bow handle fabricated type extruded section of 100mm long complete all as specified and as directed.

S&F Butt hinges 100mm extruded aluminium alloy with mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F aluminum anodised barrel tower bolts, bearing ISI mark, of extruded section 150mm long complete all as specified and as directed.

S&F GI 'T' grid frame work of size 600mm x600mm for false ceiling with 24x38x0.30mm thick for main runners, 24x26x0.30mm for cross runners and angle of size 23X23X0.40mm thick along with walls suspended with 4mm dia GI wire anchored in slab and fitted with buffer clips, with and including fixing of powder coated galvanised steel perforated metal tile of size 600 X 600 X 0.5mm thick with 2.5mm standard perforations,confirming to IS and fixed on grid as per manufacturer's specifications and complete all as specified and as directed.

S&F GI wall panelling of size 600mm x600mm with 24x38x0.40mm thick for carriers and 24x24x0.40mm for edge profiles with and including fixing of powder coated galvanised steel perforated metal tile of size 600 X 600 X 0.5mm thick with 2.5mm standard perforations confirming to IS and fixed as per manufacturer's specifications incluiding provision of suitable opening for installation of electric switches, fittings, AC's communication net work system of transmission and complete all as specified and as directed. Note for Sl item No. 51&52 : - Work is to be carried out in existing communication net work system and is to be carried out carefully with out distrubing the net work opeartion and also proper care is to to be taken while executing the work.

S&F 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.

Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Glazing with sheet glass 4 mm thick ordinary quality fixed to Aluminium or Steel frame in square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Steel Rolling Shutters made out of 1.00mm thick laths, gear operated type, with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete complete all as specified and as directed.

Preparation of new Steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of existing surfaces with mechanical grinding machine, vaccum cleaning by using scrubbers, hard blowers, vaccum cleaners, etc and cleaned to make it completely free from dust, dirt, paint, moisture, oil, grease, foreign material or any other previous treatment including all cracks / pot holes to be treated with solvent free adhesive or repair by epoxy mortar complete all as specified and as directed.

Epoxy Poly Urethane (EPU) floor of approx 4mm thick with priming coat of 100 microns, base coat of average thickness of 2.5mm, sealer coat of thickness of 100 micron, top coat of thickness of 1.2mm and anti static coat (Carbon coat) including provision of self adhesive copper tape including treatment of expansion / construction joints below primer coat as per manufacturer’s instruction and with the following complete all as specified and as directed. (i) Priming Coat :- (a) The prepared surface to be tested for moisture content with moisture meter and moisture content shall be below 5% every 500 sqm, a minimum 5 reading shall be taken to assess the average moisture content in the surface. (b) Apply low viscous epoxy primer of thickness 100 micron, with resin and hardener in 2:1 ratio by volume with the help of Notch trowel, stiff brush of roller, etc. The primer should be tack free before application of screed coat. (ii) Screed Coat :- Screed coat shall be of an average thickness of 2.5mm which consists resin, hardener and FQ Sand in ratio of Resin + Hardener=2.00 ltr and FQ sand 300=5 Kg. Mixing to be done correctly with an electric variable speed mixer throughly till obtaining homogeneous mixture. (iii) Top coat :- Apply a coat of sealer of 100 microns thick to remove the dust from screed coat, if any. Thereafter, apply EPU finish of average thickness 1.2mm as top coat with glossy and smooth finish. The material for top coat shall be supplied in pre-weight packs and ready to mix and use. The material shall consist of resin, hardener, formulated aggregate and EPI in the pre-weighed kit.

Taking down carefully copper/ aluminium point wiring (Light, fan, socket or power) complete all as specified and as directed.

Taking down existing MCB DB including MCB's of any capacity by disconnecting carefully complete all as specified and as directed.

Concealed point wiring with 1100V grade 1.5 Sqmm single core PVC insulated cable, copper conductor multistranded passing through and including stove enamelled steel conduit 20mm dia and conduit accessories with concealed pressed steel terminal boxes made out of 1.6mm thick MS sheet of suitable size as required at site and laminated sheet cover of 3mm thick with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected to common earth dolly as specified for one light / fan point controlled by one switch all as specified and as directed. Note : (1) Rate quoted includes for cost of cutting chases in wall / floor / ceiling, making holes for MS / PVC box and making good to the original surfaces of any description disturbed. (2) Switch and socket shall be measured and paid for separately.

All as per item No. 65.00 here-in-before but for 5 Amp switch socket on independent board complete all as specified and as directed.

All as per item No. 65.00 here-in-before but size of cable 2.5 sqmm for 15 Amp switch socket with earth wire 2.5 sqmm PVC insulated multistranded copper conductor cable complete all as specified and as directed.

S & F Switch piano flush, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S & F switch socket combination 2 in 1, 3 Pin 5 amps and 15Amp, 240 Volt, controlled by one switch complete all as specified and as directed.

S & F switch socket combination 3 Pin 5 Amp, flush type, complete all as specified and as directed.

Sub main wiring with 2 runs of 6 sqmm, single core, FRLS PVC insulated, unsheathed, 1100 volts grade, multi stranded with copper conductor, drawn through and including suitable size of stove enamelled steel conduit and accessories concealed to wall / floor with one run of FRLS PVC insulated 6 sqmm copper conductor for earth continuity including taking down old wiring complete all as specified and as directed.

Dismantling the earth chamber, Excavation and removing the u/s earthing materials along with u/s earth electrodes from the existing u/s earth pits and M/L for providing earthing with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth strip of 32x6mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 40mm light grade galvanized and 20 mm bore water pipe medium grade GI Tubing including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20mm graded stone aggregate) earth chamber and 1:2:4 type B1 RCC cover fitted with50mm thick with 6mm dia MS bars complete all as shown in SSR Pt - 1 electrical plate No 3. Note : (i) Quoted rate deemed to include the cost or excavation and earth work PCC Chamber, funnel cover etc. (ii) GI earth strip of size 32X6mm and GI Pipe 40 mm bore light grade up to 7.5m length deemed to be included in the rate quoted by the contractor.

S & F MCB DB, TPN vertical ( 8 I/C +12 O/G) with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door suitable for fixing MCBs and connecting etc.,complete all as specified and as directed.

S & F MCB TPN 125 Amp, 240V 50 HZ, 10 KA 'C' series complete all as specified and as directed.

S & F MCB SPN 63 Amp, 240V 50 HZ, 10 KA 'C' series complete all as specified and as directed.

S & F MCB SP 6-32 Amp, 240V 50 HZ, 10 KA 'C' series complete all as specified and as directed.

S & F 42 W IP LED panel made from CRC housing with full window acrylic diffuser indoor (recessed/ Pendent) 2ft X 2 ft lighting fixture flat light dissipater. The CCT should be between 3000 k to 6500 K including taking down old fitting complete all as specified and as directed.

S & F of single pole and neutral enclosure with a two pin earth plug and socket controlled by one single pole MCB 20 Amps 240 Volts complete all as specified and as directed.

Taking down carefully and remove old centralised AC duct from AFNET equipment rooms and deposited to MES store yard complete all as specified and as directed.

AMAR CONSTRUCTION

M/s Meher Construction

Siddique constructions

RAMESH CONSTRUCTION COMPANY