NFC/EP/04/2026

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

FINANCIAL INFORMATION

NAME OF THE CONTRACTOR

TURNOVER OF CONTRACTOR /BIDDER FOR LAST FIVE YEARS

Financial Analysis - Details to be furnished duly supported by figures in balance sheet/profit & loss account for the last five financial years duly certified by the Chartered Accountant,as submitted by the Applicant to the Income Tax Department(Copies to be scanned & uploaded).

S. No Financial Year Gross Annual Turnover on Construction Works/ Works Contract (Rs. In Lakhs) Profit / loss (Rs. In Lakhs) Remarks

Financial arrangements for carrying out the proposed work.

Solvency certificate from bankers of the bidder(attached sepearately in FORM-B)

Signature of the Bidder (s)

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

NAME OF THE CONTRACTOR

SOLVENCY CERTIFICATE DETAILS

S. No Type of solvency Name of Bank Solvency Amount in Lakhs Issue Date (dd-mm-yyyy)

Signature of the Bidder (s)

NOTE: This table is meant for data

1 The original bankers certificate should be on letter head of bank as per form-B of the tender document.

2 In case of partnership firm,certificate should include names of all partners as recorded with the bank

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

DETAILS OF ALL WORKS OF SIMILAR NATURE COMPLETED DURING THE LAST SEVEN YEARS AS ON THE BID SUBMISSION DATE

NAME OF THE CONTRACTOR

S. No. Name of the work/Project and location Owner of sponsoring organization Cost of work Rupees (in Lakhs) Date of commencement as per contract Stipulated date of completion Actual date of completion Litigation/arbitration case pending/ in progress with details * Name and address/telephone number of officer to whom reference may be made for the work Remarks

* Indicate gross amount claimed and amount awarded by the Arbitrator

Signature of the bidders(s)

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

Projects under Execution or Awarded

NAME OF THE CONTRACTOR

S. No. Name of the work/Project and location Owner of sponsoring organization Cost of work rupees in lakhs Date of commencement as per contract (dd-mm-yyyy) Stipulated date of completion (dd-mm-yyyy) Actual date of completion (dd-mm-yyyy) Percentage progress of work. Litigation/arbitration cased pending/ in progress with details * Name and address /telephone number of officer to whom reference may be made Remarks

(i)* Indicate gross amount claimed and amount awarded by the Arbitrator

(ii)Applicant may submit separate form for giving details of work(completed) for each year to fill up the details as above.Separate sheets if any shall be numbered in sequence.

(iii)The scanned copies of the work orders for each work be uploaded.BOQ shall be furnished at a later date on request.

(iv)Certified that the above list of works is complete and no work has been left-out and the information given is correct to my knowledge and belief.

(v)The hard copy of all similar works completed during last seven years as on the previous day of date of submission date shall also be submitted on or before due date.

Signature of the Bidder (s)

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

PERFORMANCE OF WORKS

NAME OF THE CONTRACTOR

S. No. Name of the work / Project and location AGREEMENT N0 Cost of work rupees in lakhs Final completion value in lakhs Date of commencement as per contract (dd-mm-yyyy) Stipulated date of completion (dd-mm-yyyy) Actual date of completion (dd-mm-yyyy) extension of time with or without levy of penality or to be decided Amount of compensation for delay levied Amount of reduced rates Perfrmance -to indicate very good / good / fair / poor Remarks

1 quality finance tech prof resources Gen behaviour 10

* Indicate gross amount claimed and amount awarded by the Arbitrator

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

NAME OF THE CONTRACTOR

S. No. Description of the item Details Remarks

1 Contractors name with address

Contact person name

2 Legal status of the bidder (a)An Individual( b)Proprietary firm (c) A firm in partnership (d) A limited company or Corporation-Attach copy of Legal document

3 Names and Titles of directors & Officers with designation to be concerned with this work

4 Designation of Individual authorised to act for the organisation

5 Was the bidder ever required to suspend construction for a period of more than 6 months(If so,give the details)

6 Registration of contractors

Financial Limit

Date of Registration

Address of the issuing authority/to whom TDS is to be remitted

8 GST registration no

Address of Commercial tax office to whom GST deducted to be remitted

9 EPF registration No

10 ESI registration No

11 LIN registration no.

12 Has the bidder or any constituent partner ever abandoned the awarded work before its completion(If so,give the details)

13 Has the bidder or any constituent partner ever been debarred/blacklisted for tendering in any organisation(If so,give the details)

14 Has the bidder or any constituent partner ever been convicted by the court of law(If so,give the details)

15 Field of Civil Engineering Construction the bidder has specialisation and interest

16 Any other information considered necessary but not included above

Signature of the Bidder (s)

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

NAME OF THE CONTRACTOR

DETAILS OF TECHNICAL & ADMINISTRATIVE PERSONNEL TO BE EMPLOYED FOR THIS WORK

S. No. Designation Total Number Required Number available for this work Remarks

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

DETAILS OF CONSTRUCTION PLANT AND EQUIPMENT LIKELY TO BE USED IN CARRYING OUT THE WORK

NAME OF THE CONTRACTOR

S. No. Name of equipment Nos. Capacity or type Age Condition Ownership status Current location Remarks

Presently owned Leased To be purchased Proposed to be hired

Signature of the bidder (s)

Name of Work :- "Electrical Works at ED&A facility at NUFAP , NFC Hyderabad" TENDER NOTICE NO: NFC/EP/04/2026

NAME OF THE CONTRACTOR

Applicant to write YES/NO against each item, with clarification and document reference as required. Applicant is required to consider complete scope of work and supply, and comply to specifications and as such ‘NO’ is not warranted. However, in case if Applicant’s reply is ‘NO’ for any of the checklist points, bidder shall give reasons for the same.

Applicant is required to submit all information and relevant documents correctly, failing which Applicant’s Bid shall be considered as non-responsive and may be considered liable for rejection. The owner reserves the right not to give an opportunity on a later date to submit incomplete documents/ information after bid submission date. All documents are to be flag marked for easy identification specifically in the hard copy of bid.

SL NO COMPLIANCE STATEMENT/QUERY APPLICANT'S CONFIRMATION/ ANSWER (YES/NO), WITH CLARIFICATION AS REQUIRED PAGE NO. OF THE DOCUMENT(S) (IN HARD COPY)

1. Tender document cost, if applicable in line with NIT provisions of NIT document, submitted. Provide details with copy. Not Applicable Not Applicable

2. Processing Fee of required value and in requisite form as per NIT provisions of document submitted. Provide details with copy. Not Applicable Not Applicable

3. Submission of BSD, in line with provisions of NIT Document. Provide details.

4. Have you been banned or delisted by any Government or Quasi Government Agencies or Public Sector Undertakings (PSUs)? If so, provide details with present status.

5. Are you currently in the Holiday list of NFC or CPWD or PWD etc. due to any reason? If so, the reason for the same to be provided.

6. Power of attorney (POA) on non-judicial stamp paper of appropriate value /Letter of authorization in case of proprietorship organization in favour of signatory (ies) of the Bid submitted. Provide copy of same duly authenticated by Gazetted Officer/ Notary.

7. Applicant to confirm that all pages of their offer has been signed by their authorized signatory (ies) who is holding Power of Attorney (POA).

8. As specified in the NIT Document, Bid is valid up to …….(Write Date in Col. 3) (Considering 120 Days from the due date/ extended due date of opening of Bid Not Applicable

9. Have you submitted Copies of Work Order including all subsequent amendments and change orders, Detailed Letter of Acceptance & Agreement etc. as applicable against all the jobs considered to meet the NIT qualification criteria indicated by you in Form-C, as per order (Sl. No.) mentioned therein duly self attested as stipulated in the tender? Provide reference in Column 3. S.NO. Details of Work order /Amendment / Change order/ DLOA, ETC

10. Applicant to submit Work completion certificates for all the jobs considered to meet the NIT qualification criteria indicated by you in Form-C, duly self attested as stipulated in the NIT document.

11. Applicant to submit Complete work order including schedule of quantities (SOQ) of all jobs considered to meet the Pre qualification criteria as mentioned in Form-C, highlighting the components of Similar Work as mentioned under NIT, in case it is a composite nature of work.

12. Applicant to indicate Value of component of Similar Work separately for all jobs considered to meet the Pre qualification criteria mentioned in Form-C meeting the experience criteria as defined in the NIT ( in Column No.3). Applicant to submit Client’s certificate indicating value of similar nature of work , in case the job is of composite in nature and value cannot be worked out from Work Order/SOR etc. Sl.NO. Value of Similar Work/Similar work component in Lakhs

13. Applicant to submit Performance reports of all jobs considered to meet the NIT qualification criteria as per Experience Criteria as indicated in NIT document, strictly as per format FORM-E.

14. Applicant to submit complete financial statement including profit & loss account, all schedules and auditor’s report for the last five financial years as mentioned in NIT.

15. Applicant to confirm submission of Auditor’s Certificate against Bidding Capacity (The certificate against Bidding Capacity has to be strictly Certified by Applicant’s Statutory Auditor/Chartered Accountant as specified in the NIT).

16 In case the Work of the qualifying job(s) submitted have been executed as a Sub-Contractor to main contractor, Applicant to confirm submission of the following documents in addition to what is stated at Sl. No. 10 to 15 above, as applicable above for main contractor for all qualifying jobs duly self attested.

i. If the contractor executed composite work that includes qualifying similar nature work

ii. Copy of Work Order along with SOQ

iii. Copy of Completion Certificates, final bill copies from the End User/ Owner indicating detailed scope with the separation of various components and their values of Work executed by the Applicant.

iv. Performance report from End-User/Owner strictly as per the format i.e., FORM-E enclosed with this NIT document..

v. Completion certificate qualifying scope of work.

17 Applicant to submit Appendix-I to NIT titled “Technical and Administrative Personnel” duly signed & stamped with company seal

18 Applicant to submit Appendix-II to NIT titled “Plant, Equipment & Machinery” duly signed & stamped with company seal.

19 Applicant to submit Solvency Certificate duly filled in FORM-B titled “Form of Banker’s Certificate from a Scheduled Bank and same , should be on the letter head of the issuing bank” as per the enclosed format in the NIT Document duly Signed & Stamped with seal by the concerned scheduled Bank

20 Applicant to submit duly filled in FORM-A titled “Financial Information” strictly in the format available in the NIT Document duly certified by Chartered Accountant and signed by the Applicant, also indicating Financial Arrangements for carrying out the proposed work as asked in Sl. No. II of FORM-A

21 Applicant to upload duly filled in Form-C (Details of all similar works completed in all respects during last seven years as on the bid submission date) indicating all the information strictly in the format as enclosed in the NIT Document.

22 Applicant to upload duly filled in Form-D (Details of all works of any nature under execution or Awarded) indicating all the information strictly in the format as enclosed in the NIT Document.

23 Applicant to upload duly filled in Form-A (Construction Turnover for last five financial years) indicating Turnover and Profit/Loss details of last Five financial years strictly in the format as enclosed in the NIT Document..

24 Applicant to upload duly filled in Form-H (Details of Construction Plant and Equipment likely to be used in carrying out the work) indicating all the information as asked.

25 Applicant to upload duly filled in Form-G (Details of Technical and Administrative personnel to be employed for the work) indicating all the information as asked.

26 Applicant to upload duly filled in Form-F (Structure & Organisation) indicating all the information as asked.

27 Applicant to confirm acceptance of time schedule for completion of the Work as stipulated in NIT document.

28 Applicant to submit copy of GST registration certificate self attested.

29 Applicant to submit copy of Permanent Account Number (PAN), GST certificate, Employees Insurance and provident fund registration certificate duly self attested.

30 Applicant to submit Undertaking/ Affidavit as per Clause No. 39, 40 & 41 of NIT document.

31 Applicant to submit declaration by bidder

32 Applicant to submit Hard Copy of Checklist

Signature of the Bidder (s)

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Chief Engineer & DCE (CED, PD & EP)

Name of Work: Electrical Works at ED&A facility at NUFAP , NFC Hyderabad

Contract No: NFC/EP/04/2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

0.000 Supply, installation, testing and commissioning of 415V TPN Power Distribution Board with 36kA/1sec short circuit rating, with minimum IP 43 made out of 2mm thick CRCA steel with the following components generally as specified in the specification and IE Rules as per components indicated therein. Make of PDB Panel -OEMs-L&T / Schneider Electric / Siemens or Authorized licensed channel partners of OEMs

0.000 PDB-1 [NUFAP ED&A] with following components a. 400 A FP microprocessor based MCCB with O/L, S/C , E/F & Earth leakage protection with adjustable settings as incomer with required spreader links and ROM handle. The incomer shall be provided with R/Y/B and ON/OFF/TRIP indication lamps, 1 No. MFM, -1 No Incomer b. 250A TPN microprocessor based adjustable MCCB- 1 Nos c. 125A TPN SDFU with 125A HRC Fuse- 4 Nos d. 63A TPN SDFU with 10A-63A HRC Fuse - 10 Nos e. 32A TPN SDFU with 10A-32A HRC Fuse - 16 Nos

0.999 Supply 1 Nos Excess(+) Full Conversion INR

0.000 Installation 1 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of vertical model double door TPN/SPN Distribution boards with minimun IP 43 of following sizes Note: RCBO& MCBs shall be C rated and indicative type Makes of DB/MCCB/MCB/RCBO: LEGRAND, HAGER, SCHNEIDER, SIEMENS, ABB,L&T,GE

0.000 8 way vertical TPN MCB DB with following components. a. 63 A, 100 mA FP RCBOs - 1 No Incomer b. 32A TP MCB - 2 Nos c. 20 A SP MCB - 18 Nos

0.999 Supply 4 Nos Excess(+) Full Conversion INR

0.999 Installation 4 Nos Excess(+) Full Conversion INR

0.000 12 Way Horizontal SPN MCB DB with following components. a. 32 A DP 30mA RCBO incomer - 1 No b. 10A SP MCB - 6Nos c. 16A SP MCB - 2 No

0.000 Supply 6 Nos Excess(+) Full Conversion INR

0.999 Installation 6 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of following light fittings with all accessories like supporting hardware, downrods, junction boxes, required frames etc as required to complete the installation in all respects Makes: PHILIPS, WIPRO,BAJAJ

0.000 LED high efficient 2ft X 2ft, generation-V or better, surface-cum-recess mounted light fitting with CRCA housing, with output >=4200 Lumens, Luminaire efficacy of around >=120 lm/W, IP20, surge protection of minimum 4KV, power factor>0.95, THD<10%, CRI>80, CCT-5700K , voltage range 140-270V AC, Electrical insulation class-1, EMI/EMC compliance.

0.999 Supply 50 Nos Excess(+) Full Conversion INR

0.999 Installation 50 Nos Excess(+) Full Conversion INR

0.000 LED Industrial Midbay light fittings with output >7600 Lumens, Luminaire efficacy of around 105 lm/W, IP66, inbuilt surge protection of minimum 4KV, CRI>70, CCT-5700K, voltage range 120-270V AC, Lifetime of 50,000 burning hours, Insulation class-1

0.000 Supply 40 Nos Excess(+) Full Conversion INR

0.999 Installation 40 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of Legrand/ Hager/Siemensmake 63A 3 pole & Earth (3P+N+E) 5 Pin Metal clad power socket with 63 A TP MCB control including plug top

0.999 Supply 12 Nos Excess(+) Full Conversion INR

0.000 Installation 12 Nos Excess(+) Full Conversion INR

0.000 Powder coated sheet steel 8 module FP RCBO enclosure box with 4P 63A 30mA FP RCBO

0.999 Supply 5 Nos Excess(+) Full Conversion INR

0.000 Installation 5 Nos Excess(+) Full Conversion INR

0.000 Powder coated sheet steel 4 way enclosure box with 4P 25A 30mA FP compact RCBO

0.999 Supply 25 Nos Excess(+) Full Conversion INR

0.000 Installation 25 Nos Excess(+) Full Conversion INR

0.000 Powder coated sheet steel 2 way enclosure box with 2P 10A 30mA DP compact RCBO

0.999 Supply 5 Nos Excess(+) Full Conversion INR

0.000 Installation 5 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of modular switch boards along with required face plate, surface mounted PVC back box, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Colour of the switches and sockets/frame shall be Grey colour. Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO

0.999 12 modular switchboard with 10 Nos 6A Switches and 1 Nos of 6A Socket

0.000 Supply 8 Nos Excess(+) Full Conversion INR

0.000 Installation 8 Nos Excess(+) Full Conversion INR

0.999 8 modular switchboard with 6 Nos 6A Switches and 1 Nos of 6A Socket

0.000 Supply 50 Nos Excess(+) Full Conversion INR

0.999 Installation 50 Nos Excess(+) Full Conversion INR

0.000 6 modular switch board with 2 No of 6/16 A universal Sockets and 2 nos of 16A switches

0.000 Supply 8 Nos Excess(+) Full Conversion INR

0.999 Installation 8 Nos Excess(+) Full Conversion INR

0.000 3 modular switchboard with 1 Nos of 6/16A socket and 1 No of 16A switch

0.999 Supply 10 Nos Excess(+) Full Conversion INR

0.999 Installation 10 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of modular switch boards along with required face plate, concealed GI back box, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Colour of the switches and sockets/frame shall be Grey colour. Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO

0.999 12 modular switchboard with 4 No of 6/16 A universal Sockets and 4 nos of 16A switches

0.000 Supply 30 Nos Excess(+) Full Conversion INR

0.000 Installation 30 Nos Excess(+) Full Conversion INR

0.999 8 modular switch board with 2 No of 6/16 A universal Sockets and 2 nos of 16A switches and 2 nos of Fan Regulators

0.000 Supply 30 Nos Excess(+) Full Conversion INR

0.999 Installation 30 Nos Excess(+) Full Conversion INR

0.000 6 modular switchboard with 2 No of 6/16 A universal Sockets and 2 nos of 16A switches

0.000 Supply 40 Nos Excess(+) Full Conversion INR

0.999 Installation 40 Nos Excess(+) Full Conversion INR

0.000 3 modular switchboard with 1 No of 6/16 A universal Sockets and 1 nos of 16A switches

0.999 Supply 30 Nos Excess(+) Full Conversion INR

0.999 Installation 30 Nos Excess(+) Full Conversion INR

0.000 Supply and pulling of following sizes of flexible FRZH copper wires to be drawn in already concealed PVC conduit/channels/external conduit/ DLP trunking with ferruling on both ends excluding cost of pipes, channels and switch boards. Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED

0.999 1.5 Sq.mm FRZH Copper wire

0.000 Supply 6500 M Excess(+) Full Conversion INR

0.000 Installation 6500 M Excess(+) Full Conversion INR

0.999 2.5 Sq.mm FRZH Copper wire

0.000 Supply 5000 M Excess(+) Full Conversion INR

0.999 Installation 5000 M Excess(+) Full Conversion INR

0.000 Pedestal Fans with 400mm sweep with push button type regulator and 3 speed settings and with adjustable height between 900mm to 1050mm Make: CG HS, KHAITAN URJA, ORIENT ELECTRIC ECO TECH, BAJAJ ENERGOS, USHA ENERGION 32

0.999 Supply 25 Nos Excess(+) Full Conversion INR

0.999 Installation 25 Nos Excess(+) Full Conversion INR

0.000 Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC extruded inner sheathed, armoured, FRLS PVC ST2 outersheathed cable on cable trays/trenches/ground with all accessories Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED

0.999 3.5c 35 sqmm Al Cable

0.000 Supply 500 M Excess(+) Full Conversion INR

0.000 Installation 500 M Excess(+) Full Conversion INR

0.999 4c 16 Sq.mm Al cable

0.000 Supply 250 M Excess(+) Full Conversion INR

0.999 Installation 250 M Excess(+) Full Conversion INR

0.000 4c 10 Sq.mm Cu cable

0.000 Supply 500 M Excess(+) Full Conversion INR

0.999 Installation 500 M Excess(+) Full Conversion INR

0.000 4c 6 Sq.mm Cu cable

0.999 Supply 1000 M Excess(+) Full Conversion INR

0.999 Installation 1000 M Excess(+) Full Conversion INR

0.000 4c 4 Sq.mm Cu cable

0.999 Supply 200 M Excess(+) Full Conversion INR

0.000 Installation 200 M Excess(+) Full Conversion INR

0.999 4c 2.5 Sq.mm Cu cable

0.000 Supply 300 M Excess(+) Full Conversion INR

0.000 Installation 300 M Excess(+) Full Conversion INR

0.999 3c 2.5 Sq.mm Cu cable

0.000 Supply 1000 M Excess(+) Full Conversion INR

0.000 Installation 1000 M Excess(+) Full Conversion INR

0.000 3c 1.5 Sq.mm Cu cable

0.000 Supply 200 M Excess(+) Full Conversion INR

0.999 Installation 200 M Excess(+) Full Conversion INR

0.000 Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty double compressor glands, heavy duty long neck copper lugs etc complete Makes: DOWELLS, JAINSON, HMI, COMET

0.999 3.5c 35 Sq.mm Al cable

0.000 Supply 14 Nos Excess(+) Full Conversion INR

0.000 Installation 14 Nos Excess(+) Full Conversion INR

0.999 4c 16 Sq.mm Al cable

0.000 Supply 4 Nos Excess(+) Full Conversion INR

0.999 Installation 4 Nos Excess(+) Full Conversion INR

0.000 4c 10 Sq.mm Cu cable

0.000 Supply 16 Nos Excess(+) Full Conversion INR

0.999 Installation 16 Nos Excess(+) Full Conversion INR

0.000 4c 6 Sq.mm Cu cable

0.999 Supply Nos Excess(+) Full Conversion INR

0.999 Installation Nos Excess(+) Full Conversion INR

0.000 4c 4 Sq.mm Cu cable

0.999 Supply 12 Nos Excess(+) Full Conversion INR

0.000 Installation 12 Nos Excess(+) Full Conversion INR

0.999 4c 2.5 Sq.mm Cu cable

0.000 Supply 36 Nos Excess(+) Full Conversion INR

0.000 Installation 36 Nos Excess(+) Full Conversion INR

0.999 3c 2.5 Sq.mm Cu cable

0.000 Supply 84 Nos Excess(+) Full Conversion INR

0.000 Installation 84 Nos Excess(+) Full Conversion INR

0.000 3c 1.5 Sq.mm Cu cable

0.000 Supply 120 Nos Excess(+) Full Conversion INR

0.999 Installation 120 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of following sizes of 2mm thickness GI perforated cable trays along with tray cover

0.999 300 mm width, 100mm height

0.000 Supply 100 M Excess(+) Full Conversion INR

0.000 Installation 100 M Excess(+) Full Conversion INR

0.999 50 mm width, 50mm height

0.000 Supply 200 M Excess(+) Full Conversion INR

0.999 Installation 200 M Excess(+) Full Conversion INR

0.000 Supply and installation of 25 mm dia 1.8 mm thick PVC conduits and required junction boxes confirming to IS with accessories like bends, junction boxes, couplers etc (at least one for every 3m of length or as per site requirement whichever is higher) in wall , roof , false ceiling etc, including ccomplete (Make: Sudhakar/AKG)

0.999 Supply 500 M Excess(+) Full Conversion INR

0.999 Installation 500 M Excess(+) Full Conversion INR

0.000 Supply and installation of 25 mm dia 1.8 mm thick PVC conduits and required junction boxes confirming to IS with accessories like bends, deep junction boxes, couplers etc (at least one for every 3m of length or as per site requirement whichever is higher) in wall , roof slabs, false ceiling etc, including cutting the wall/chasing and making good the same to the original finish complete (Make: Sudhakar/AKG)

0.000 Supply 500 M Excess(+) Full Conversion INR

0.999 Installation 500 M Excess(+) Full Conversion INR

0.000 Supply and installation of accessories suitable for 25 mm dia PVC conduit (Make: Sudhakar/AKG)

0.000 Coupling Bends 100 Nos Excess(+) Full Conversion INR

0.999 Couplers 150 Nos Excess(+) Full Conversion INR

0.000 Junction Box 100 Nos Excess(+) Full Conversion INR

0.999 Deep Junction Box 150 Nos Excess(+) Full Conversion INR

0.000 Fan Box 50 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of 2mm thick powder coated 3 way MS junction boxes along with 6A 4 way connectors 150 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of 25 mm dia galvanized steel flexible conduit pipes with PVC coating (Make: Sudhakar/AKG)

0.000 Supply 100 M Excess(+) Full Conversion INR

0.999 Installation 100 M Excess(+) Full Conversion INR

0.000 Supply and installation of 32 x 20 mm DLP plastic trunking system with required clamps for fixing, cover, end caps etc complete including required angles and junctions (for every 2m of length) etc complete

0.000 Supply 200 M Excess(+) Full Conversion INR

0.999 Installation 200 M Excess(+) Full Conversion INR

0.000 Supply and fixing of 50 x 6 mm hot dip galvanised GI strip for earthing at a height on cable trays/walls/ground

0.000 Supply 100 M Excess(+) Full Conversion INR

0.999 Installation 100 M Excess(+) Full Conversion INR

0.000 Supply and fixing of 25 x 6 mm hot dip galvanised GI strip for earthing at a height on cable trays/walls/ground

0.000 Supply 600 M Excess(+) Full Conversion INR

0.999 Installation 600 M Excess(+) Full Conversion INR

0.000 8 SWG Hot Dipped GI wire

0.000 Supply 300 M Excess(+) Full Conversion INR

0.999 Installation 300 M Excess(+) Full Conversion INR

0.000 Suply and installation of structural steel like channels, angles etc for fabriaction and erection of, cable trays supports, light fitting supports etc and painting of the same with red oxide and 2 coats of grey enamel paint. Rate should also include the required bolts and nuts for fixing of supports Make of Structural steel: TATA, Vizag Steel, Jindal Ispat, SAIL

0.000 Supply 500 Kg Excess(+) Full Conversion INR

0.999 Installation 500 Kg Excess(+) Full Conversion INR

0.000 Supply and fixing of 100 mm X 25 mm anodised Aluminium cable tags engraved on black back ground with name of the load along with required hardware for fixing the lables on to the cables. 250 Nos Excess(+) Full Conversion INR

0.000 Supply and installation of panel front electrical insulation mat roll of width 1 M and 2 mm thick as per latest IS 15652:2006 10 M Excess(+) Full Conversion INR

0.000 Removal of existing MCB Distribution boards of approx dimension 600 X 300mm mounted on the wall/concelaed in the walls and making good of the surface. The removed material should be shifted to an identified location about 500m away. 15 Nos Excess(+) Full Conversion INR

0.000 Removal of cables of about 95 Sq.mm to 2.5 sq.mm sizes and making good of the surface. The removed material should be cut to 1m lengths and shifted to an identified location about 500m away. 1500 M Excess(+) Full Conversion INR

0.000 Removal of MS/PVC lighting Switchboards/ sockets along with its associated wiring and conduits and making good of the surface. The removed material should be shifted to an identified location about 500m away 100 Nos Excess(+) Full Conversion INR

0.000 Removal of light fitting along with their down rods, associated wiring, conduits, trunking etc and other accessories and making good of the surface. The removed material should be shifted to an identified location about 500m away. 100 Nos Excess(+) Full Conversion INR

Total in Figures Excess(+) Full Conversion INR

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information