Plantation of Various Species of Trees, Shrubs, and Ornamental Plants, including soil preparation, turfing, mulching, and maintenance work Area Garden Development Near Gunjan Interior at beneath the Overbridge near Narasang Tekri With 5-year O & M.

NAME OF WORK : Construction Children Play Area Near Gunjan Interiour at beneath the Overbridge near Narasang Tekri.

Quantity Discription of Item Rate Unit Amount

Demolition and disposal of unserviceable materials with all lead and lift.(i)

SOR Item No 20001A

Excavation for foundation upto 1.5 m depth including sorting out and

2 105.00 stacking of useful materials and disposing off the excavated stuff upto 50 128.79 CUM ₹

Meter lead.(A) Loose or soft soil

SOR Item No 04001A

Removal and Carting of Excavated stuff and laying within 5 km porbandar

limit as directed by Engineer in charge

Carting Statement 5A Quarry of material of Earth pg no 254pdf

Filling in foundation and plinth with murrum or selected soil in layers of

4 62.00 20cm. thickness including watering, ramming and consolidating etc. 307.41 CUM ₹

SOR Item No 04008A

Rolling of earthwork in layers with power roller including filling in

depressions which occur during the process.

SOR Item No 26002A

Providing & laying spreading and compacting 200mm thick WBM Grade -

I of B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%)

filler i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at

the rate 0.08 cumt. including spreading in uniform thickness, hand

packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade

and camber, applying and brooming type of screning/binding materials to

fill up the interstices of coarse aggregate, watering and compacting to the

required density.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

7 26.00 4- graded stone aggregates 20 mm nominal size) and curing complete 3842.91 CUM ₹

excluding cost of formwork in (A) Foundation and Plinth

SOR Item No 05010AA 5.3.13

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

SOR Item No 05024AA

White Stone Bela mesonry block in course in superstructure with stone of

9 22.00 approved quality in Lime Mortar 1:5 (1- Cement :5- course sand) including 5379.02 CUM ₹

packing the joints etc. complete.

SOR Item No 07008A

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

SOR Item No 17002A

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M300 grade

11 72.00 concret as per approved design and including excavation for fixing in 419.96 Rmt ₹

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

SOR Item No 14023A

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

12 58.00 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 1198.64 Sqmt ₹

pigment to match the shade of slab including rubbing and polishing etc.

SOR Item No 14013 A

Providing and supplying Precast wet cast reinforced concrete bollards of

size 250 × 250 × 900 mm in natural grey colour (without pigment),

manufactured with high-quality materials and internal steel reinforcement

13 8.00 to ensure strength, durability, smooth finish, and long service life, suitable 2142.00 No ₹

for pedestrian protection, traffic management, and security applications in

high-traffic areas, on supply-only basis, complete as directed and in

accordance with the Engineer-in-Charge

Fabrication, supply, and fixing of 80-micron (80mic) Hot Dip Galvanized

Iron (GI) grill work as per approved design, including cutting, welding,

14 2592.00 grinding, anchoring with base plates and grouting, ensuring proper 160.00 Kg ₹

alignment and completing all related works as directed by Engineer-in-

Applying priming coat of over new steel and other metal surface after and

including preparing the surface by thoroughly cleaning, oil grease, dirt and

other foreign mater and scoured with brushes fine steel wool, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brusing interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

Extra over item 7 and 11 for every subsequent coat of Paint

Providing, supplying, and fixing Surface Mount Stainless Steel Bench with

Back Rest of overall length 1300 mm (3-seater) conforming to RDSO

Specification (Item No. 172040 & 172050 of USSOR), fabricated from

grade stainless steel conforming to IS:6911 / ASTM A240/A240M, with

seat and backrest connecting pipe of 40 mm dia × 2 mm thickness,

backrest width 300 mm, clear height 890 mm, including all fittings,

fasteners, installation on prepared surface, furnishing confirmatory test

reports for stainless steel grade, ensuring OEM is ISO 9001:2015 certified,

and completing the work in all respects as per specification and direction

of Engineer-in-Charge.

Finishing wall with water proofing cement paint of on wall surfaces (Two

coats) to give an approved brand and manufacture and of required shape

even shade after thoroughly brushing the surface to remove all dirt and

remains of loose powered materials

SOR 2024-25 It.No.

Repairing the existing rainwater spout pipeline under flyover, including

tracing the line, clearing blockages, carrying out necessary repairs,

19 160.00 extending the pipeline up to the designated outfall point at the drainage 890.00 Rmt ₹

area, and completing all associated labour, fittings, and allied works as

directed by the Engineer-in-Charge.

The agency shall carry out the work at a height of approximately 10 metres

by means of a hydraulic crane or other suitable vehicle, with all such

arrangements to be made by the agency at its own cost and scope. All

electrical connections, safety measures, and allied arrangements required

for execution shall also be in the scope of the agency. The work shall be

carried out strictly as clarified and approved by the Engineer-in-Charge.

Providing, supplying, and installing EPDM rubber flooring of 36 mm total

thickness comprising 6 mm thick UV-stable EPDM wear layer bonded over

30 mm thick high-density shock-absorbing scrubber layer, manufactured

using virgin EPDM/SBR granules with non-toxic, weather-resistant, anti-

skid, and abrasion-resistant properties, factory-moulded or site-pressed to

uniform density and smooth textured finish, suitable for outdoor open gym

and heavy-duty public-use areas. Work includes complete surface

preparation of the existing base (cleaning, leveling, minor rectification),

application of PU primer/adhesive, precise laying, cutting, joint alignment,

and finishing of tiles/mats to achieve a seamless, durable, resilient, and

deformation-free surface. Flooring shall withstand repetitive impact loads,

UV exposure, and outdoor weathering, and shall be delivered, handled,

installed, and finished in all respects as per manufacturer’s

recommendations and as directed by the Engineer-in-Charge.

Providing and fixing children play equipment including the complete cost of

site clearing, marking, excavation, and construction of PCC foundation of

required size, depth, and alignment, along with proper installation and

grouting of all structural members as per manufacturer’s design and as

directed by the Engineer-in-Charge. All equipment components shall be

fabricated from high-quality, heavy-duty steel sections duly hot-dip

galvanized at 200°C for superior corrosion resistance and outdoor

21 durability, with smooth, child-safe powder-coated finish in approved

colours. Slides, swings, climbers, seats, handrails, ladders, and all moving

parts shall be made from non-toxic, UV-stabilized, impact-resistant

materials with rounded edges, anti-finger-trap details, and tamper-proof

fasteners ensuring maximum safety. The work includes complete

fabrication, supply, transportation, handling, positioning, levelling,

anchoring, tightening, finishing, and making the play area safe, clean, and

fully functional, completing the installation in all respects..

1.00 Children Play Combo 242300.00 Nos ₹

2.00 Straight slide FRP (Big) 11'x2'x5' 38125.00 Nos ₹

2.00 Wave slider FRP (Big) 17'x2'x5 36875.00 Nos ₹

2.00 Spiral slide FRP (Small) 11'x6'x5 18650.00 Nos ₹

2.00 Double see-saw 8'x6'x3' 18000.00 Nos ₹

3.00 Swing (Big) 17'x2'x5 16526.00 Nos ₹

PORBANDAR MUNICIPAL CORPORATION

NAME OF WORK : Construction of a Storm Water Drain Works at Near Gunjan Interiour at beneath the Overbridge near Narasang Tekri.

Quantity Discription of Item Rate Unit Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

SOR Item No 04001A

Removal and Carting of Excavated stuff and laying within 5 km porbandar limit as directed

by Engineer in charge

Carting Statement 5A of Earth work

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2- Coarse sand :4-stone

3 4.00 aggregate 20mm nominal size) finished smooth complete including curing and festing (i) 11042.73 Nos ₹

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-

Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

SOR Item No 24008A

Providing bedding incl. ramming, watering, levelling, consolidating etc. Complete as per

standard and instruction of engineer incharge

As above with required quality Sand brought from outside inclduing all lead

GWSSB SOR 2022-23, Item No. 3, Part 1&2 B, Page No.

Providing and supplying and laying ISI Standard R.C.C. pipes(of Sulphate Resisting

Cement) in standard lengths of following class and diameter suitable for either collar joints

or rubber ring joints including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. &

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in

proper position, grade and alignment at all level as directed by Engineer-in-charge

including conveyance from stores to site of work, labour, giving hydraulic testing as per ISI

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length socketed

pipe, cost included in rates below.

Box Cricket Ground beneath (F2) 400 mm dia (NP4 Class)

GWSSB SOR 2022-23, Item No. & 10.1.E, Part 1&2 A, Page No. 15 & Item No. 11.b, Part

1&2 B, Page No.

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

stuff as directed within a radius of 3 km.

GWSSB SOR 2022-23 Section 1&2 B, Item No. 14, Page No.

7 2.00 Tracing of old Manhole. All Types Of Manhole at Every 15 Mt. 1214.02 Nos ₹

GWSSB SOR 2022-23 Section 2- D, Item No. 11, Page No.

PORBANDAR MUNICIPAL CORPORATION

NAME OF WORK :-Plantation of Various Species of Trees, Shrubs, and Ornamental Plants, including soil

preparation, turfing, mulching, and maintenance work Area Garden Development Near Gunjan Interiour at

beneath the Overbridge near Narasang Tekri.

Item No. & Description Quantity Rate Per Amount

Supplying and stacking of good earth at site including royalty and

carriage upto 5 km lead complete (earth measured in stacks will

be reduced by 20% for payment).

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.2 PG. NO.

Supplying and stacking of well decayed cattle manure at site

including royalty and carriage upto 5 k.m.lead complete (Cattle

manure measured in stacks will reduced by 8% for Payment).

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.25 PG. NO.

Rough dressing the trenched ground including breaking clods.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.5 PG. NO.

Fine dressing of the ground.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.7 PG. NO.

Mixing earth and sludge or manure in the required proportion

specified or directed by the Officer-in-charge

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.9 PG. NO.

Spreading of sludge, dump manure and/or good earth in required

thickness as per direction of officer-in-charge (cost of sludge,

dump manure and/ or good earth to be paid separately).

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.8 PG. NO.

Preparation of beds for hedging and shrubbery by excavating

cm deep and trenching the excavated base to a further depth of

30 cm, refilling the excavated earth after breaking clods and

mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked

volume of earth after reduction by 20%: one part of stacked

volume of sludge or manure after reduction by 8%), flooding with

water, filling with earth if necessary, watering and finally fine

dressing, leveling etc. including stacking and disposal of materials

declared unserviceable and surplus earth by spreading and

leveling as directed, within a lead of 50 m, lift up to 1.5 m

complete (cost of sludge, manure or extra earth to be paid for

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.13 PG. NO.

TREE PLANTATION

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of 2:1 by

volume (2 parts of stacked volume of earth after reduction by 20%

: 1 part of stacked volume of manure after reduction by 8%)

flooding with water, dressing including removal of rubbish and

surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately)

Holes 45 cm dia, and 45 cm deep

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.14.3 PG. NO.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and

removal of unserveiceable material’s as per direction of officer in

charge (excluding cast of plant & water)

TREE PLANT 115.00 7.30 EACH ₹

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 2.57.1 , 2.57.2

Item No. 10 TREE PLANT

Providing and stacking of Plumeria rubra of height 120-150 cm.

with 3-4 branches and thick stem in big size HDPE bags as per

direction of the

officer-in-charge. (champa)

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 7.72 PG. NO.

Item No. 11 TREE PLANT

Providing and stacking of Foxtail palm of ht. 240-270 cm bottom

girth 35-40 cm well developed in big size HDPE bags as per

direction of the officer-in-charge.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 7.44 PG. NO.

Item No. 12 SHRUBS

Providing and stacking of Calliandra hybrida of height 105-120

cm., well branched, bushy inbig size HDPE bag as per direction of

the officer-in-charge.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 8.7 PG. NO.

Item No. 13 SHRUBS

Providing and stacking of Caesalpinia pulcherrima species of

height 45-60\ cm. in earthen pot of size 20 cm as per direction of

the officer-in-charge.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 8.4 PG. NO.

Item No. 14 SHRUBS

Providing and stacking of Nerium oleander (kaner) of height 60-75

cm. with 5-6 branches in poly bags of size 25 cm as per direction

of the officer-in-charge

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 8.5 PG. NO.

Item No. 15 SHRUBS

Providing and stacking of Euphorbia caracasana (bronze colour

leaves) of height 60-75 cm. with 4-5 branches in bag of size

cm as per direction of the officer-in-charge.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 8.17 PG. NO.

Item No. 16 SHRUBS

Providing and stacking of Clerodendrum thomsoniae of height

cm.to 45 cm in 20 cm size of poly bag & as per direction of the

officer-in-charge (Seaside Clerodendrum)

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 9.6 PG. NO.

Item No. 17 SHRUBS

Providing and stacking of Hibiscus rosasinensis of height 90-105

cm., bushy in big size HDPE bag as per direction of the officer-in-

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 8.37 PG. NO.

Item No. 18 SHRUBS

Providing and stacking of Tabernaemontana coronaria (Chandni

single) of height 90-105 cm.,bushy in big size HDPE bag as per

direction of the officer-in-charge.

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 8.60 PG. NO.

Item No. 19 Rose Plant

Providing and Displaying of Standard Rose (H.T. variety) 3 to

healthy branch 90 cm and above ht. well developed with one and

above flowers in 25 cm Earthen Pot, as per direction of the officer-

CPWD SOR DSR 2020 SUB HEAD 2.0 IT. CODE 4.93 PG. NO.

Total Amounts Rs...………........ ₹

Total Amounts Rs...………........ ₹

Say Amounts Rs...………........ ₹

PORBANDAR MUNICIPAL CORPORATION

Name of Work:- ELECTRICAL WORK at Children Play Area Near Gunjan Interiour at beneath the Overbridge near Narasang Tekri.

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Incomer 1 Nos. 29,997.00 ₹

Supply, installation, testing, and commissioning of the LV Distribution Board (LVDB), totally

enclosed, dust- and vermin-proof, indoor type, fabricated from CRCA sheet steel with a

minimum thickness of 3.0 mm for the base frame, channels, and gland plates, 2.0 mm for load-

bearing members and doors, and 1.6 mm for internal partitions. The LVDB shall have a

minimum degree of protection of IP-52 as per IS: 2147 and shall be suitable for operation on a

3-phase, 4-wire, 415 V, 50 Hz system with effectively grounded neutral. The board shall be

provided with dedicated instrumentation compartments accommodating meters, auxiliary

and protective relays, LED-type indicating lamps, and control MCBs as per IS: 13947, along

with current and voltage transformers conforming to IS: 2705. Air-insulated electrolytic-grade

aluminium or copper busbars shall be provided for the three-phase and neutral system, with a

GI earth bus running throughout the entire length of the panel. Power and control wiring shall

GWSSB SOR 2022-23, be carried out using 1100 V grade FRLS insulated copper conductor wires conforming to IS:

1 Section E, Item No. 694 and IS: 8130. The panel shall include all necessary equipment fittings and a horizontally

1.16b,Page No.84 running busbar compartment with a minimum height of 300 mm. Incoming and outgoing

cable connections shall be suitable for 1100 V grade aluminium or copper conductor,

XLPE/PVC insulated and PVC-sheathed armoured cables. The LVDB shall be complete with the

required incoming, bus-coupler, and outgoing modules of the specified types and ratings.

Above 16 A, upto & including 80 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC

60947-2 with trip free mechanism, current limiting type with Thermal Magnetic /

Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum

2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections

& interlocks etc. MCCB module, when used as Outgoing(s), shall have enclosure dimensions-

300(H) x 500(W) x 600 (D) & following technical features:

3 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), Microprocessor release

SITC of Power Distribution Board (LDB) as under: 1 Nos. 2,422.03 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

R&B SOR 2025-26, Item 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

No. 3.11.5(B-iii) company of MCB to be used) suitable for

3 Phase 4 Wire TPN, 8 way Prewired LDB for Indoor and Outdoor Lighting:

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity 1 Nos. 3,010.60 ₹

R&B SOR 2025-26, Item of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase

No.-3.12.2(iii) Cat-III, and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature

& do not incorporate any electronic component for following Max. rating erected as directed.

Incoming: 63A TPN, ELMCB (30mA)

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA 6 Nos. 573.26 ₹

R&B SOR 2025-26,Item breaking capacity & confirms to IS :8828 in existing box having following capacity

No.-3.10.4 A Cat-III, Outgoing: 6 nos. 6-32A FP MCB 'B' Curve

MEDIUM VOLTAGE CABLES 100 Mtr 150.12 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

R & B Ele SOR 2025-26, conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

Item No. 4.3.5-(A) following size of cables

4C x 16 sq. mm. A2XFY Cable ( From incomer to PDB)

CABLE GLAND 4 Nos. 47.11 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

R & B Ele SOR 2025-26, armoured cable complete with out going tails, insulating tape etc for following size of cables

6 4C x 16 sq. mm. A2XFY Cable

Item No. 4.6.1 -(D)+

CABLE LUGS 16 Nos. 15.03 ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

R & B Ele SOR 2025- evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

26,Item No.-4.7.1-C plated nut bolts in an approved manner.

4C x 16 sq. mm. A2XFY Cable

CHEMICAL EARTHING SYSTEM 2 Nos 5,788.31 ₹

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)(approved make OEM has

to submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane

R & B Ele SOR 2025-26 mentioned in test Certificate) & having back filling compound of (B) Inner chemical

8 (CCMCompound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

Item no. 3.14.10-(A)

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :Earthing

compound should be capable to retain moisture for long time Necessary test report must be

submitted by Agency.

[A] For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling compound - 1 Nos.

of Bag of 15 Kgs.

(2nos. Each for body of Panel)

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ 115 kg 77.17 ₹

ACB/ Transformer LT panel board, Motors etc.using proper clamp.

R & B Ele SOR 2025-26

9 Size of 50mm(w) x 6mm(T)

Item no. 3.14.2

(50X6 G.I Strip wt.2.3 kg/m, 2.3x50Mt.=115kg.) ( For incomer Panel )

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. (For LDB and PDB 5 Kg 77.17 ₹

R & B Ele SOR 2025-26

Item no. 3.14.5

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 50Mt.=5 Kg)

INTERNAL WIRING 150 Mtr 101.06 ₹

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

R & B Ele SOR 2025-26 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

Item no. 1.4.1 A-A-(D) stranded wire of green colour for earth continuity of following size (a) SITC of Mains wiring with

3 wire 1.5 sq.mm.

(A) With medium class Rigid PVC pipe and accessories

3 wire 2.5 sq. mm

INTERNAL LED LIGHT FIXTURES & LIGHTING: 4 Nos. 5,144.28 ₹

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

R & B Ele SOR 2025-26 heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

Item no. 2.16.2 B-(i) with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 4 Nos 340.43 ₹

R & B Ele SOR 2025-26 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with

Item no. 6.5.6 necessary hardware materials duly painted for wall mounting indoor & outdoor flood light

fixtures on Wall of Buildings.

C TOTAL OF ELECTRICAL WORKS ₹

PORBANDAR MUNICIPAL CORPORATION

DISTRICT :- PORBANDAR

NAME OF WORK :- Operations & Maintenance (O&M) of Children Play Area Near Gunjan Interiour at beneath the Overbridge near Narasang Tekri.

The Schedule of O & M ESTIMATE NO.13

Manpower Schedule For O & M - Financial Breakup

Shift / Minimum Pay Per Pay Per

Sr. No. Manpower 1st Year 2nd Year 3rd Year 4th Year 5th Year

Nos Wages Day Year

Gardner / Sweeper

Including Day to Day cleaning of garden area, collecting guarbage from dustbin, dispose the waste at the dedicated location, watering the garden, maintain switched on - off

schedule of lighs, other eletric equipements etc as pe the requiremnent of Municipal Corporation including required Necessary Materials And Machineries.

During the O & M periods the defective light should be replaced by the contractor.

A daily penalty of ₹1,000/- shall be levied for any non-compliance or delay in fulfilling the Operation and Maintenance (O&M) obligations, in accordance with the terms and

conditions of the contract.