Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC AT SURGUDA DIST SUNDARGARH | SUNDARGARH | ODISHA | ₹13.4 L | L1 | Accepted-AOC Accepted |
| 2 | Rejected-Technical AT PO HEMGIR DIST SUNDARGARH 0 | - | - | Rejected-Technical Rejected |
Tender Value
₹13.4 L
EMD Value
₹13,370
Closing Date
27 Feb 2026, 5:00 pmClosed
Executive Engineer R.W. Division, Sundargarh
O/o of the Superintending Engineer R.W. Division, Sundargarh At/po-Sankara. Dist-Sundargarh. 770020
Repair to Bridge over Basundhara river at 2nd Km on Laikera to Kalobahal road
2026_CERWI_126369_2
Online-SESNG-28 of 2025-26
National Competitive Bid
Civil Works - Roads
30 days
Sundargarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹13,370
Yes
10 Apr 2026
20 Feb 2026
27 Feb 2026
20 Feb 2026
27 Feb 2026
20 Feb 2026
Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge
Providing ,laying ,spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant ,carriage of mixed materials by tipper to site ,laying in uniform layers with pave .
Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60 kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works.
Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 0.25 to 0.30 Kg/ Sqm on prepared bituminous surface using mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision).
Providing and laying Semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled,vibratory roller and tandem rollers to achieve the desired compaction as per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision)
Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5 m transporting to site ,spreading ,grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a llead upto 1000 m as per Technical Specification clause 301.5 .
Providing and errecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Class-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to clause 801.3, fixed over 2mm thick aluminium sheeting Clause 6.5.2 of IRC: 67-2012 with angle iron frame 75mm x 75mm x 6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6mm firmly fixed to the ground with M-15 grade cement concrete 45x45x75cm as per approved drawing inculding cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.C. 1200mm x900 mm informatory sign board
Providing and errecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Class-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to clause 801.3, fixed over 2mm thick aluminium sheeting Clause 6.5.2 of IRC: 67-2012 with angle iron frame 75mm x 75mm x 6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6mm firmly fixed to the ground with M-15 grade cement concrete 45x45x75cm as per approved drawing inculding cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.C. Village informatory board(600x450)mm
Providing and errecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Class-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to clause 801.3, fixed over 2mm thick aluminium sheeting Clause 6.5.2 of IRC: 67-2012 with angle iron frame 75mm x 75mm x 6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6mm firmly fixed to the ground with M-15 grade cement concrete 45x45x75cm as per approved drawing inculding cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.C. 600 mm dia Cautionary Board
Providing and errecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Class-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to clause 801.3, fixed over 2mm thick aluminium sheeting Clause 6.5.2 of IRC: 67-2012 with angle iron frame 75mm x 75mm x 6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6mm firmly fixed to the ground with M-15 grade cement concrete 45x45x75cm as per approved drawing inculding cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.C. 900 mm Equilateral Triangle
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area ,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC-35 .The finished surface tobe level ,uniform and free from streaks and holes .
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_582177.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
DTCN28.pdf
Tender Documents • 3.95 MB
BOQ_582177.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid