Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC Work awarded | |
| 2 | L2₹23.8 L+₹89,743 (3.92%)Rejected-AOC PANDARAPARAMBIL H KOTTOOLI PO CALICUT 673016 | KOZHIKODE | KERALA | 673016 | L2 | Rejected-AOC Work awarded to L1 | |
| 3 | L3₹24.6 L+₹1.7 L (7.40%)Rejected-Finance | L3 | Rejected-Finance Lowest bid accepted. | |
| 4 | L4₹25.0 L+₹2.1 L (9.31%)Rejected-Finance | L4 | Rejected-Finance Lowest bid accepted. | |
| 5 | L5₹26.3 L+₹3.4 L (14.7%)Rejected-Finance | L5 | Rejected-Finance Lowest bid accepted. |
Tender Value
₹38.6 L
EMD Value
₹50,000
Closing Date
9 Oct 2023, 3:00 pmClosed
Executive Engineer
Office of the Executive Engineer, PWD Buildings Division, Kozhikode
DEPOSIT H FWD Annual Plan 2022 23 Medical Education Implementation of Plan Schemes Improvement works to Nurses Hostel A amp B attached to Govt Medical College Kozhikode General Civil Work
2023_PWD_607269_1
48/EEBK/2023-24
Open Tender
Civil Works - Buildings
Item Rate
180 days
Medical college
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹50,000
Yes
6 Jan 2024
27 Sept 2023
11 Oct 2023
27 Sept 2023
9 Oct 2023
27 Sept 2023
Amount
DETAILED ESTIMATE
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
OD283638/2022-2023:Removing blocks from sewer manhole manhole of size 60x60 cm depth up to 60 cm (filled with solid waste from closet line ) and clearing the dirty materials into suitable excavated pits to a safe distance place including charges for bamboo splits for clearing blocks from manhole to main hole connecting line,hire charges for rope ,buckets and all labour charges and all incidental charges etc.complete,as per the direction of departmental officers at site.
OD283639/2022-2023:Removing blocks from sewer manhole of size 75x75 cm and depth up to 240 cm (filled with solid waste from closet line ) and clearing the dirty materials in to suitable excavated pits to a safe distance place including charges for bamboo splits for clearing block from manhole to main hole connecting line,hire charges for rope,buckets and all labour charges and all incidental charges etc complete as per the direction of departmental officers at site.
OD283640/2022-2023:Repairing the existing wash hand basin by replacing the damaged pillar tap pillar cock,PVC connection etc.and testing the water flow,cleaning the basin etc.complete including all cost and conveyance of all materials,all labour charges etc.complete as per the direction of departmental officers at site.
OD283648/2022-2023:Removing blockage from the bath room trap or sink trap and its connecting pipe line and clearing the dirty matters to a safe distant place and check the pipe line after pouring the waste etc.including all cost and conveyance of materials of materials,all labour charges etc complete,as per the direction of departmental officers at site.
OD283649/2022-2023:Removing blockage from the water closet and 'S' or "P" trap connected sewer lines etc and clearing the dirty matters to a safe distant place and check the pipe line after pouring the waste etc. including all cost and conveyance of materials,all labour charges etc.complete,as per the direction of departmental officers at site .
OD283650/2022-2023:Providing Stainless steel mosquito net in aluminium frame for windows and other openings to prevent the entry of mosquitoes in rooms including material & labour etc complete
LANEESH .P
RAJAN P
SAJI P
P MUHAMMED
DEEPESH P
SANOOP
C T RAJENDRAN
Sumesh
JUNAIS K
Manoj Kuzhikkadan
biju p v
KERALA RURAL DEVELOPMENT LABOUR CONTRACT CO-OPERATIVE SOCIETY LIMITED
Bidder Name
Manoj Kuzhikkadan
Santhosh Kumar K.V.
C T RAJENDRAN
RAJAN P
SAJI P
P MUHAMMED
DEEPESH P
LANEESH .P
JUNAIS K
biju p v
Sumesh
KERALA RURAL DEVELOPMENT LABOUR CONTRACT CO-OPERATIVE SOCIETY LIMITED
SANOOP
stage.html
html • 0.07 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_905601.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .