Providing additional source of water supply to AIIMS Campus at Vijaypur, Samba under NABARD

Amount

Construction of GSR/Sump Tank of 20000 Glns capacity (02 Nos.) (Items Rate) Earth work in bulk excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work weigh batched, using cement content as per approved design mix using weigh batcher attached with concrete mixer with or without hopper at site of work as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 340/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works upto plinth level

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work weigh batched, using cement content as per approved design mix using weigh batcher attached with concrete mixer with or without hopper at site of work as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 340/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works above plinth level upto floor V level

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more

Dumping of stone in Horizontal on level

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc. and removal of form for: Arches, domes, vaults upto 6 mtrs span.

12mm plaster finished with a floating coat of neart cement of mix: 1:3 (1 cement : 3 coarse sand)

12mm cement plaster of mix :1:4 (1cement: 4 coarse sand)

Extra for plastering on circular work not exceeding 6m in radius: In one coat

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Providing and in corporation during concerting GP Sheet strips for water seal at construction joint

Providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement

Providing and fixing PVC, bends 80mm dia

Providing and fixing of G.I pipe of 80mm dia for inlet, outlet an washout G.I pipe 80mm dia

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing 1mm thick M.S sheet door (manhole cover) with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using flats 30 x 6mm for diagonal braces and central cross piece ( manhole cover with locking arrangement complete size 0.60 x 0.60 = 04 Nos.

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Fabrication of 80mm dia GI bends welded with MS plates including fixing for outlets and washout etc.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 15 km

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km

Carriage of soling stone/ boulders by Mechanical Transport from source to site of work for an av. Distance of 10 km.

Civil Works: (Items Rate) Construction of tube- well cum Pump Room Building E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (with 20 % boulders)

Reinforced cement concrete work in walls ( any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding the cost of centering and shuttering , finishing and reinforcement 1 : 1.5: 3 ( 1 cement : 1.5 corse sand : 3 graded stone aggregate 20 mm normal size)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)and curing complete

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies, door lintels, window lintels, Gate pillars and access platforms.

Columns, pillars, piers, abutments, posts and struts

Edges of slabs and breaks in floors and walls under 20 cm wide

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel promer all complete. Fixed to steel windows by welding

12mm Cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

15mm thick Cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing Glass strips in joints of terrazzo/ cement concfete floors. Glass strips 40 mm wide and 4mm thick

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing on wall for unplastcised rigid PVC rain water pipes including jointing with seal ring 75mm dia.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 15 km.

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km.

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km.

Carriage of Brick from klin to site of work by M.T 02 km

Internal concealed Electrification including under ground conduit pipes, wiring, steel boxes and switches for 4 No light points(internal) with holder and LED bulbs and external 4 Nos with LED security lights with required M.S. bracket for mounting (external grade) including Service line upto 10 m complete as directed by Engr in charge.

Provision for Steel Girder

Provision for construction of bathroom, soak pit near pump room building incl. all fittings, tile work, sanitary fittings, whitewash, electrification etc. complete job

Construction of Compound wall around the civil structures (03 Nos.) E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement 4 coarse sand)

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

15mm thick Cement plaster or rough side of single or half brick wall of mix : 1:4 ( 1 cement : 4coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including a coat of approved steel primer by excluding a coat of mordent solution

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 15 km

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km.

Carriage of Brick from klin to site of work by M.T 02 km

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bars, ladder, railings, brackets, gates and similar works

Repair of Pump Room Building at tube- site Forest Vijaypur : Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel promer all complete. Fixed to steel windows by welding

15mm thick Cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by weight of cement and finishing neat. With machine moulded Common burnt clay (Non modular) brick tiles of class designation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.

Painting top of roof with bitumen of approved quality at 17 kg/ 10sqm impregenates with a cost of coarse sand at 60 cudm per 10 sqm including clening the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing on wall for unplastcised rigid PVC rain water pipes including jointing with seal ring 75mm dia.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 15 km.

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km.

Carriage of Brick from klin to site of work by M.T 02 km

Carriage of Brick tile from klin to site of work by M.T 02 km

Internal concealed Electrification including under ground conduit pipes, wiring, steel boxes and switches for 4 No light points(internal) with holder and LED bulbs and external 4 Nos with LED security lights as directed by Engr in charge.

Provision for drainage, sanitation and water supply

Repair of Pump Room Building at tube- site Railway Track- II: Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel promer all complete. Fixed to steel windows by welding

15mm thick Cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by weight of cement and finishing neat. With machine moulded Common burnt clay (Non modular) brick tiles of class designation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.

Painting top of roof with bitumen of approved quality at 17 kg/ 10sqm impregenates with a cost of coarse sand at 60 cudm per 10 sqm including clening the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing on wall for unplastcised rigid PVC rain water pipes including jointing with seal ring 75mm dia.

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 15 km.

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km.

Carriage of Brick from klin to site of work by M.T 02 km

Carriage of Brick tile from klin to site of work by M.T 02 km

Internal concealed Electrification including under ground conduit pipes, wiring, steel boxes and switches for 4 No light points(internal) with holder and LED bulbs and external 4 Nos with LED security lights as directed by Engr in charge.

Provision for drainage, sanitation and water supply

Mechanical Works: Providing, Installation, testing and commissioning of submersible pump set 06 Nos. of parameters 5000 GPH x 76 mtr head ( 03 Nos. working & 03 Nos. standby at each T/Well) along with allied works including chorination for one year & operation and maintenance for one year

Providing, Installation, testing and commissioning of 100 kva Servo voltage stablizer ( 03 Nos.) along with allied works including panel board and 200 Amp Main Switch (03 Nos.)

Providing, Installation, testing and commissioning of fully automatic LT control panel 50 Amp ( 03 Nos.) for submersible pump sets along with standby MUG-30

Providing, Installation, testing and commissioning of HC pump set 06 Nos. of parameters 6000 GPH x 100 mtr head at 03 Nos. tube/well cum pumping stations (01 No. working & 01 No. standby at each T/well) along with allied works

Providing, Installation, testing and commissioning of 70 Amp. Automatic LT control panel and oil cooled star delta starters (06 Nos. as standby) along with allied works

Fabrication, Installation and commissioning of gantry along with chain pulley hoist (electrical) along with allied works (03 Nos.)

Pipe Works: E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil

Providing and fixing of GI pipes complete with cost of G.I pipes / fittings / gate valves / sluice valve / flow meter on R/main & G/main / all types of pipe specials as per site requirement including handling of all type of carriages of material to the sites of work, interconnection at tapping point and delivery point with the exisiting system, (complete rate to be quoted by the Contractor) excluding trenching and refilling etc.

GI pipe 80mm dia (Medium) ( trench size 0.80 x 0.70 )

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete

Providing and fixing of mechanical Chlorinator for tube- well automation with automatic Chlorine dozing at 03 No. tube- wells sites along with allied works .

ASHOK KUMAR SHARMA

TRIKUTA BUILDERS