Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC THEERTHAM NADUVILEMURI PADANILAM POST NOORANAD ALAPPUZHA DIST KERALA 690529 | ALAPPUZHA | KERALA | 690529 | L1 | Accepted-AOC Accepted contract, being lowest. | |
| 2 | L2₹40.8 L+₹2.4 L (6.19%)Rejected-AOC DOOR NO IV 400 NEAR RAMANTHALI GHSS RAMANTHALI PO KANNUR 670308 | KANNUR | KERALA | 670308 | L2 | Rejected-AOC Rejected, not being lowest. | |
| 3 | L3₹42.4 L+₹4.0 L (10.5%)Rejected-AOC | L3 | Rejected-AOC Rejected, not being lowest. |
| Sl No | Description | Qty | Unit | TAMS ASSOCIATES L3 | SREEKRUPA ENTERPRISES L2 | Green Ray Enterprises L1 |
|---|---|---|---|---|---|---|
| 1.00Notes:- 1. Contractor should visit the site before quoting the tender to know the working condition of the station. 2. All requisite safety measures are to be adopted by contractor on site. 3. The complaint/ breakdown will be attended/rectified within two working days after informing the complaint by the AGE E/M or his authorised rep. 4. If contractor failed to rectify the complaint/breakdown within two day then recovery will be done at Rs. 1500.00 Per day. | ||||||
| 2.00 | Repair/replacement of old U/s LT panel board with outdoor type double door floor mounted free standing dust and vermin proof panel with IP-65 protection fabricated out of 3mm thick CRCA sheet of suitable size duly pretreated in seven tank proces for degreasing, de-rusting and phosphated primer powder coated then painted with requisite number of epoxy based powder coating. Panel shall be having front and rear opening for installation of separate cable alleys with proper locking arrangement with busbar chamber and switch gear compartments. Provision in cable alleys to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 400 mm to be kept from floor level for switch gear compartment. Extended busbar links/terminals to be provided for heat dissipation. Suitable size knockout holes for cable glands shall be provided. Paint shall be epoxy based approved shade of colour and make and size of panel duly mentioned the size of each component and switch gear layout drawing shall be submitted for the approval of Garrison Engineer through the Engineer-in-Charge before ordering the items.The panel shall be duly supported on angle iron of size 40x40x4mm thick. Panel shall include following accessories:- | 3 | Each Job | 57,000 ₹1,71,000 Lowest | 57,985 ₹1,73,955 | 70,000 ₹2,10,000 |
| 2.01(a) Busbar chamber (4 nos TP&N of suitable rating ) (Aluminium bus bar ) SET 01 (with proper colour code ) (b) Phase indicator LED lamp assy -03 No (c) Complete wiring of panel with suitable gauge multi stranded copper conductor with proper colour code. (d) Digital multi functional meter to measure current, voltage, power factor etc-01 , with connected CT's of suitable size. (e) Panel should have separate chambers and busbar extensions to accomodate following switch gears:- i) MCCB 4 pole 125 Amps as incomer - 01 No as incomer. ii) MCCB 4 pole 63 Amps - 03 Nos. Timer with contactor 63 Amps for street light connection with push button for direct ON & OFF - 01 Set Notes:- a) Panel should be procured from firms having CPRI approved certificate and existing serviceable switch gears obtained from old panel board will be reused and new switch gears replaced with be measured and paid separately. | ||||||
| 3.00 | Repair/ replacement of old U/s LT panel board with outdoor type double door floor mounted free standing dust and vermin proof panel with IP-65 protection fabricated out of 3mm thick CRCA sheet of suitable size duly pretreated in seven tank proces for degreasing, de-rusting and phosphated primer powder coated then painted with requisite number of epoxy based powder coating. Panel shall be having front and rear opening for installation of seperate cable alleys with proper locking arrangement with busbar chamber and switch gear compartments. Provision in cable alleys to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 400 mm to be kept from floor level for switch gear compartment. Extended busbar links/terminals to be provided for heat dissipation. Suitable size knockout holes for cable glands shall be provided. Paint shall be epoxy based approved shade of colour and make and size of panel duly mentioned the size of each component and switch gear layout drawing shall be submitted for the approval of Garrison Engineer through the Engineer-in-Charge before ordering the items.The panel shall duly supported on angle iron of size 40x40x4mm thick. Panel shall include following accessesories:- | 1 | Each Job | 1,15,000 ₹1,15,000 Lowest | 1,19,156 ₹1,19,156 | 1,70,000 ₹1,70,000 |
| 3.01(a) Busbar chamber (4 nos TP&N of suitable rating ) (Aluminium bus bar ) SET 01 (with proper colour code ) (b) Phase indicator LED lamp assy -03 No (c) Complete wiring of panel with suitable gauge multi stranded copper conductor with proper colour code. (d) Digital multi functional meter to measure current, voltage, power factor etc-01 , with connected CT's of suitable size. (e) Panel should have separate chambers and busbar extensions to accomodate following switch gears:- i) MCCB 4 pole 400 Amps as incomer - 01 No as incomer. ii) MCCB 4 pole 250 Amps- 02 Nos. iii) MCCB 4 pole 63 Amps - 10 Nos iv) Contactor MCX 12, 4 pole, 415 volts, 63 Amps - 01 No v) Digital time switch day / weeks programme with reserve 30 minutes - 01 No Notes:- a) Panel should be procured from firms having CPRI approved certificate and existing serviceable switch gears obtained from old panel board will be reused and new switch gears replaced with be measured and paid separately. | ||||||
| 4.00 | Repair/ replacement of old U/s LT panel board with outdoor type double door floor mounted free standing dust and vermin proof panel with IP-65 protection fabricated out of 3mm thick CRCA sheet duly pretreated in seven tank proces for degreasing , de-rusting and phosphated primer powder coated then painted with requisite number of epoxy based powder coating. Panel shall be having front and rear opening for installation of seperate cable alleys with proper locking arrangement with busbar chamber and switch gear compartments. Provision in cable alleys to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 400 mm to be kept from floor level for switch gear compartment. Extended busbar links/terminals to be provided for heat dissipation. Suitable size knockout holes for cable glands shall be provided. Paint shall be epoxy based approved shade of colour and make and size of panel duly mentioned the size of each component and switch gear layout drawing shall be submitted for the approval ofGarrison Engineer through the Engineer-in-Charge before ordering the items.The panel shall duly supported on angle iron of size 40x40x4mm thick. Panel shall include following accessories:- | 2 | Each job | 60,000 ₹1,20,000 Lowest | 63,082 ₹1,26,164 | 1,05,000 ₹2,10,000 |
| 4.01(a) Busbar chamber (4 nos TP&N of suitable rating ) (Aluminium bus bar ) SET 01 (with proper colour code ) (b) Phase indicator LED lamp assy -03 No (c) Complete wiring of panel with suitable gauge multi stranded copper conductor with proper colour code. (d) Digital multi functional meter to measure current, voltage, power factor etc-01 , with connected CT's of suitable size. (e) Panel should have separate chambers and busbar extensions to accomodate following switch gears:- i) Change over switch 250A - 01 A (as incomer) ii) MCCB 4 pole 250 Amps - 02 No (connected in out of change over to provide supply to one outgoing at a time) Notes:- a) Panel should be procured from firms having CPRI approved certificate and existing serviceable switch gears obtained from old panel board will be reused and new switch gears replaced with be measured and paid separately. | ||||||
| 5.00 | Repair/replacement old U/s LT panel board with out door type double door floor mounted free standing dust and vermin proof panel with IP-65 protection fabricated out of 3mm thick CRCA sheet of suitable size duly pretreated in seven tank proces for degreasing, de-rusting and phosphated primer powder coated then painted with requisite number of epoxy based powder coating. Panel shall be having front and rear opening for installation of seperate cable alleys with proper locking arrangement with busbar chamber and switch gear compartments. Provision in cable alleys to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 400 mm to be kept from floor level for switch gear compartment. Extended busbar links/terminals to be provided for heat dissipation. Suitable size knockout holes for cable glands shall be provided. Paint shall be epoxy based approved shade of colour and make and size of panel duly mentioned the size of each component and switch gear layout drawing shall be submitted for the approval of Garrison Engineer through the Engineer-in-Charge before ordering the items.The panel shall duly supported on angle iron of size 40x40x4mm thick. Panel shall include following accessories:- | 1 | Each Job | 70,000 ₹70,000 Lowest | 74,998 ₹74,998 | 1,20,000 ₹1,20,000 |
| 5.01(a) Busbar chamber (4 nos TP&N of suitable rating ) (Aluminium bus bar ) SET 01 (with proper colour code ) (b) Phase indicator LED lamp assy -03 No (c) Complete wiring of panel with suitable gauge multi stranded copper conductor with proper colour code. (d) Digital multi functional meter to measure current, voltage, power factor etc-01 , with connected CT's of suitable size. (e) Panel should have separate chambers and busbar extensions to accomodate following switch gears:- i) MCCB 4 ple 400 Amps as incomer - 01 No as incomer. ii) MCCB 4 pole 250 Amps- 02 Nos. iii) MCCB 4 pole 63 Amps - 04 Nos iv) Contactor MCX 12, 4 pole, 415 volts, 63 Amps - 01 No v) Digital time switch day / weeks programme with reserve 30 minutes - 01 No Notes:- a) Panel should be procured from firms having CPRI approved certificate and existing serviceable switch gears obtained from old panel board will be reused and new switch gears replaced with be measured and paid separately. | ||||||
| 6.00 | Material and labour for dismantling old LT APFC panel and supply, installation, testing & commissioning floor mounted factory made cubical LT APFC panel of size 1400mm(H) X 1100mm(W) X 500mm(D) made of 3 mm thick CRCA sheet with aluminium bus bar suitable for 400 Amp double door out door type, CPRI approved duly pre-treated in seven tank process for degreasing and de-rusting and phosphated primer powder coated than painted with requisite number of epoxy based powder coating , including base channel, inter connection control wiring name plate for each switch gears, danger plate, earth bus bar as per IS 5039. comprising of compartments for 100 KVAR (5+10+10+ 25+25+25) in shape of round capacitors and its accessories, cable gland with hinged door, bus chamber with bolted door etc dust & vermin proof construction attractive powder coated complete all as specified and as directed.The panel shall duly supported on angle iron of size 40x40x4mm thick. Panel shall include following accessories:- | 4 | Each Job | 1,50,000 ₹6,00,000 | 1,54,202 ₹6,16,808 | 1,20,000 ₹4,80,000 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Oct 2025, 6:00 pmClosed
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2025_MES_731765_1
GE MAINT EZHIMALA 8780
Open Tender
Civil Works
Item Rate
330 days
Ezhimala
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹80,000
Yes
11 Nov 2025
19 Sept 2025
28 Oct 2025
19 Sept 2025
22 Oct 2025
4 Oct 2025
19 Sept 2025 - 26 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
Tenderdoc.pdf
Tender Documents • 1.13 MB
BOQ_819278.xls
BOQ • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .