Repairing and Renovation of Anganwadi kendra at Various villages in Ta.chuda, Dist. Surendranagar (2nd attempt)

Name of work : Repairing and Renovation of Anganwadi kendra at various villages in Ta. Chuda, Dist.

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

1 Removing or scraping of old deteriorated plaster of any 220.35 Cum 18.93

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift

2 Provoding and fixing flush door shutters, solid core 15.00 Sqm 1797.76

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

3 Dismentaling tiled of stone floors laid in mortar including 201.70 Sqm 46.77

stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.

4 Providing and laying white glazed tiles 8 to 10mm thick, 201.70 Sqm 1073.12

24"*24" in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

5 Providing 15mm thick cement plaster in single coat on Rough 220.35 Sqm 186.12

(Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth in

(i) Cement mortar 1:3 (1-cement:3-sand)

6 Distempering (two coats) with oil bound distemper of 624.10 Sqm 72.07

approved brand & manufacturer & of required shade on wall

surfaces to give an even shade, over & including a priming

coat with a distemper primer of approved brand & manufacture

after thoroughly brushing the surface free from mortar

dropping & other foreign matter & also including preparing

7 Finishing wall with Weather proof exterior emulsion paint on 577.70 Sqm 114.53

wall surface (two coats) to give an approved brand and

manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and remain of loose

powered materials.

(SOR I. No. 19031 P. No. 136)

8 Providing and fixng Water Closet squatting pan (Indian Type 5.00 No 1368.16

W.C. Pan) size 580 mm including 100 mm size P Trap & Foot

rest (Earth work, Bed concrete, foot rest and traps to be

measured and paid for separatly) (A) Vitreous China (i) Long

Pattern white colour (SOR I.23009+23011+23012)

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

9 Providing and fixing wash basin with single hole for pillar tap 5.00 No 2092.54

with C.I. or M.S. brackets painted with including cutting holes

and making good the same including fittings. (A) Vitreous

Chona (ii) Flat back wash Basin 550mm x 400mm size (i) in

white colour including pillarcock & Stop cock.

10 Providing laying and jointing in true line and level 32mm dia. 70.00 Rmt 119.14

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials.(SOR Item 23063)

11 Providing laying and jointing in true line and level 25 mm 70.00 Rmt 91.83

dia. U.P.V.C. Pipe (SCH - 40) line including fittings make

or equivalent as apprroved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials (

SOR I. No 23062 P. No 159)

12 Providing and fixing to wall ceiling and floor 10.0 Kg. /Kcm2 75.00 Rmt 336.23

working pressure polythene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clips etc. including making good the wall ceiling

and floor. (c) 100mm dia.

13 Providing and fixing S.W. gully trap with C.I. grating brick 5.00 No 1292.19

masonary chamber and watering tight C.I. cover with frame of

300 mm x 300mm size (inside) with standard weight (i) squre

month traps (A) 100 mm x 100mm size P type. (SOR I.No.

14 Providing & fixing PVC SWR Nanhi trap IS 14735 for drain - 10.00 No 558.35

100 mm diameter with jali of following nominal diamete self

cleaning design with C.I. scread down or hinged gratting

including cost of cutting & making good the walls (SOR New

15 Providing and fixing gun metal check or non return full way 5.00 No 360.34

wheel valve(C) 25mm dia ( SOR M265)

16 Providing and fixing Screw Down Bib Tabs of following size 15.00 No 186.82

(A) Brass screw downbib tab polished bright (i) 15 mm dia

(SOR I.No. 23028 A1 )

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

17 Providing and fixing double coated Sintex or Equivalent PVC 2500.00 Liter 3.94

(ISI) mark water tank of required capacity each with all

necessary fitting and connection etc. complete on terrace or as

directed by Engineer in Charge.

(SOR Pg,No.149,It No.22014)

18 Providing Bela masonary septic tank inside 3.0 M x 1.0 x 1.20 5.00 No 25272.97

M including excavation, B.B.C.C. 1:5:10 concrete at bed,

mm thick Bela masonary wall in CM 1.6 alround, 0.115 mt

thick two partition wall set equal distance in CM cement

plaster in CM 1:3 R.C.C. top slab of C.C. 1:2:4 (0.10 mm

thick) two Nos. of C.I. cover of 0.60 x 0.45 mt size having

weight not less than 35 kg curing finishing etc complete.

19 Supplying & fitting Electrification including standard ISI mark 5.00 No 15554.00

copper wire gauge minimum 3/20 & above, 20 Nos of lighing

point, 2 Nos Fans, 6 Nos Tube light, including electric

accesseries like Tube light T-5, CRL, Fans, uality as required

under the supervision & as directed by Engineer-in-charge

20 Providing & laying broken China mosaic flooring for terrace 175.10 Sqm 747.28

using 12mm to 20 mm broken piece of glazed tiles to be laid

over cement mortar 1:3 (1 cement : 3 sand) to plain or slope

and to be tempered to bring mortar creme out upto surface

using white cement including rounding of junctions and

21 Providing and fixing Nand Ghar Logo and bala paint ( As per 5.00 No 2020.00

Rs. Eight Lakh Thirty Eight Thousands Fourty Four rupees and Fifty Three Paisa Only

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should be

written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat (R&B) Division

Limbdi Surendranagar