COMPREHENSIVE MAINTENANCE AND REPAIR TO CERTAIN BR WORKS FOR ZONE 1 AND ZONE 2 AT GANDHINAGAR MIL STATION

Amount

Taking down shutter of any description exceeding 1 Square Metre and not exceeding 2 Square Metre each complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 04 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with particle board , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing

S&F 35mm thick IInd class hard wood panelled door shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete.

S&F 35 mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats

M&L for Factory made flush shutter 35mm thick solid core construction with block board core and ply wood face panels, commercial type on both side and covered with decorative face veneer both side with lipping/frame to match incl polish etc compete all as specified and directed by Engr-in-Charge.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions), slinding windows, rollers, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.30mm (section No 20621), bottom size 92x31.75x1.30mm (section No-20620) and shutter top & bottom of size 40x18x1.29 mm (section No-20844) and sides (handle) of size 40x18x1.29mm (section No-20846) and lock side shutter frame of size 40x18x1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers etc including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4mm thick glass (any shade) with necessary rubber beading gasket etc all as specified. Make:-Indal/ Jindal/ Hindalco.

M&L Aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 68.85x31.75x1.30mm (section No 20681), bottom size 68.85x31.75x1.20mm (section No 20619) and shutter top & bottom of size 40x18x1.29 mm (section No-20844) and sides (handle) of size 40x18x1.29mm (section No-20846) and lock side shutter frame of size 40x18x1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including 4mm thick glass any shade with necessary rubber beading gasket etc all as specified. Make:-Indal/ Jindal/ Hindalco.

M&L for preparing of new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC 1:2:4 type B-0 to match the existing floors/walls.

M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces.

Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws all as specified.

S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 200mm size extruded section, ISI marked & fixed complete all as specified and as directed.

S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp ,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Supply only 4mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge

Supply only 4mm thick Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge

Supply only 4mm thick Froasted glass in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge

Supply only 4mm thick tinted Coloured glass fixed to metal frame complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed

S&F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified & as directed.

Dismantling of wall and ceiling boards/ wall penelling/lining (fibre, pulp, insulation etc) of any thickness, complete all as specified and directed.

M&L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions all as directed and specified.

S&F for hollow PVC wall lining consisting of 6-8mm thick any shade PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturers instructions ,specification and drawing complete all as specified and directed. Make ; Rajshree/Sintex

Dismantling Wall and ceiling boards including framework (PVC penelling incl fillet, fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specifiedand directed

M&L for non asbestos fibre reinforced designer cement board false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c all as per manufactures instructions etc complete all as specified and as directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M & L brick work sub class 'B' bricks (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work sub class 'B' bricks , (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm gradded stone agg )as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapets copings, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

Taking down plaster in cement mortar over walls/ceiling including racking out joints & hacking for keys.

M&L Rendring 10mm thick in CM 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L Rendring 12mm thick in CM 1:4 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M & L for internal/external plaster/unplastered newly/old surfaces on walls/ceilings and preparation of surfaces of walls/ceilings and applying wall/ceiling putty of 1mm thick complete all as specified and directed by Engr-in -Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

Material and labour for preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed

Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) complete all as specified..

M&L for preparation of old surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.

M&L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of oil bound distemper (OBD) complete all as specified..

M&L for preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified.

M&L for preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying two coats of white wash complete all as specified.

M&L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified..

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M & L for complete removal of existing treatment on walls/ceilings and preparation of surfaces of walls/ceilings and applying wall/ceiling putty of 1mm thick complete all as specified and directed by Engr-in -Charge.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of weather proof exterior emulsion paint complete all as specified and as directed.

Dismantling of stone slabs and tiles /granite of any description or thickness in floors/walls, pavings, aprons, pathway etc. laid dry and pointed, complete all as specified and directed.

M&L 16-18mm thick Machine cut udaipur green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge.

M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick rendering cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 8 to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for 7-8 mm thick Glazed ceramic coloured tiles in vertical surface exceeding 0.12 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge.

M&L kota stone slab 10-15 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over rendering back of tile 10 mm CM 1:4 complete all as specified& directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and as directed.

M&L for vitrified tiles 8 to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25mm thick and area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge.

Dismantling of cast iron, PVC or reinforced concrete drain pipes including fittings ,jointed in cement mortar upto 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed.

S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 110mm bore PVC vent cowl complete all as specified and directed.

S&F in repair PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.

Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S&F for CPVC PIPE OUTER DIA 20MM Brass Elbow (3/4 X ½) complete all as specified and directed.

S&F for CPVC PIPE OUTER DIA 20MM Brass Male Brass Threaded Adaptor complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

Taking up or down 25mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

S&F 25mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

Taking up or down 40/50mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

S&F 40mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

M& L for Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

S&F in repairs 15/20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed , minimum weight - 210 gms of including taking down existing ball valves any type all as directed by Engr-in-Charge. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 48 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Demolition of old existing unserviceable Indian type WC and S&F vitreous china squatting pan of pattern 'long pan' size 580mm white (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 48 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs Single piece vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. Make : “Cardiff Range” of Parryware equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Madhusudan Ceramic as approved by GE.

S&F in repairs vitreous china wash basin white of size 550x400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repairs vitreous china counter top/down basin size 450 x 525 x 195 mm shape oval of Jaquar or equivalent of PARRYWARE / MARC / KINGSTON / SOMANY / ESS ESS / SIECO / KOHLER / HINDWARE / PRAYAG / PARKO including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.

S&F 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete for the following sizes all as directed by Engr-in-charge

S&F Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified

S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed.

S&F in repairs brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified.

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge

S&F in repair ABS body health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.as approved by the GE.

S&F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified & directed.

S&F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including over head shower etc. complete all as specified & directed byEngr-in-Charge.

Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F, in repair, 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F in repair 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete for the following sizes all as directed by Engr-in-charge :-

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, fixed in repairs, complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete

S&F in repairs long body Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified including taking down existing pillar tap and removing the same to store.

S&F in repair fancy type long body bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated fixed Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe fixed (Min. wt 90 gms) complete. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair fancy type angle cock/Stop valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair Stop valve of 15 mm dia PTMT any colour high pressure screwed for iron pipe and fixed complete Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair shower rose size 100mm x100mm , PVC suitable for 15mm bore pipe with swiveling joints complete all as specified

Hacking out old broken glass of any thickness/size of any description from steel / aluminium frame fixed with clips and putty all as specified and as directed.

S&F for 3mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 48 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F for 4mm thick any size ordinary sheet glass fixed with aluminium frame/shutter with rubber packing completed all as specified and directed.

S&F for 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 48 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned tacks or GI wire stampe and including wooden beading or nails and screws fixed Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 72 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed.

Supply and fixing in repairs brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 72 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium complete all as specified.

S&F in repair 150mm long aluminum anodised handle complete all as per IS. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 72 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs 150mm long aluminum, anodized barrel tower bolts of extruded section all as specified. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 72 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified

S&F in repair oil putty best Quality for used existing window glass complete all as specified and directed by engr-in-Charge.

S&F in repairs brass chromium plated shower rose 100mmx100mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

Taking down carefully aluminium/Rolled Formed GI section Pre-painted/ Pre-coated doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º. (iv) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (vi) Complaints must be completed with in 72 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Supply and replacement in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Supply and fixing in repairs MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

Resecuring or easing & adjusting, without taking down shutter of any description exc 1 sqm and not exc 2 sqm each all as directed. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 48 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink complete all as specified. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs CP towel ring size complete all as specified and directed.

S&F in repairs CP soap dispensar complete all as specified and directed.

S&F in repair 2-in-1 CP bib cock complete all as specified and directed by Engr-in-Charge.

S&F in repair 2 way CP angle cock complete all as specified and directed by Engr-in-Charge.

S&F in repair kitchen sink without draining board bowl size 18"x16"x8" inch of made out of stainless steel heavy duty with plugs, washers and waste pipe including waste coupling and waste pipe complete all as specified & directed by Engr-in-Charge.

Supply and fixing in repairs cover for rotational moulded polyethylene water storage tanks of any capacity complete as specified and directed. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repairs CP Sink Coupling including PVC flexible waste pipe 80cm long with socket for union, complete all as specified. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Supply and fixing in repairs PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed by Engineer-in-Charge. Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins & other water supply fittings/fixtures and any obstruction to water supply in rooms, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(soot), M-Seal, screws, nails to make water supply/plumbing lines functional and leak proof in the area of AGE B/R Gandhinagar Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R Gandhinagar complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair DOOR SEAL BOTTOM, DOOR AIR GAP RUBBER SHIELD (Best Quality) Anti Rust , Brown/white/balck colour, Black Rubber Complete all as specified

Disconnecting & dewatering of PVC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity not exc 500 ltrs each including marking the date of cleaning with white paint and stencil all as required & directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

Disconnecting & dewatering of PVC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity exc 500 ltrs but not exc 1000 ltrs each including marking the date of cleaning with white paint and stencil all as required & directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

S&F in repair 18mm thick PVC hollow board both side prelaminated of approved texture as in kitchen cabinet/cupboard ( with shelves and partions) including frame , beading and necessary fittings & fixture like auto closing concealed hinges, 150mm long fancy SS handle, magnet catch etc as per manufacturers instructions. Make ; Rajshree/Sintex

S&F, in repair, fabricatin of pressed steel cup board shutter using 1.0mm thick MS plain sheet and with frame 1.25mm thick bent to shape with and including two coats of synthetic enamel paint on internal surface in two coats of synthetic enamel paint wooden grain pattern on external surfaces and with locking arrnagement (mortice lock handle with a aset of two keys) complete all as per drg CEJZ/TD/86/2011 including taking out old prelaminated particle board shutter with frame. Note : (ii) Grith, ovelapping, banded portion inside etc. shall not be accounted in the are of shutter hence for measurement purpose, exposed external surface of the shutter with frame shall be considered. (ii) The drawing refered is for guidence only.

S&F in repair for PVC corner shelves set of 3 and size ( 7 inch , 9 inch, 11 inch ) complete all as specified and directed

M&L for water proofing of sunken portion consisting under mentioned items :- (i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

M&L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge.

Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

M&L screed laid 15mm thick in CM 1:4 as in roof over green concrete surface finished even and smooth using Lequid WPC complete all as specified. Note :-Lequid WPC will be measured and paid seperately)

M&L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

M&L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed.

M&L for Granite/green marble stone any description providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

S&F in repair 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling, holes required complete all as specified and directed. Note : All types fittings , builder’s hardware such as handles, hinges, door closure, floor door spring, lock, pivot shall be measured & paid for separately.

S&F in repair Heavy Duty Stainless Steel Cylinder Floor Spring Set for Doors, Wooden Glass Aluminum Doors , Glass doors Floor Spring, Top Patch, Bottom Patch,Top Patch Pivot(Glass Door with Weight Upto 90 KG(Silver)Set of 1 ,this Glass Door Floor Spring is a door closer device, which is installed together with the bottom of the door leaf to let the door close automatically,the connector is compatible with most of the mechanisms and doors. Size of the female connector (width x depth x height): 22 x 11 x 13 mm,Top and Bottom Patch Pivot, made of metal, with Stainless Steel profile with matt polish. Compatible with glass doors of thickness 10-12mm,Packaging for 1 set Glass Door Floor Spring, 1 set Top Patch Pivot, 1 set Bottom Patch Pivot, 1 pcs top Patch Patti, accessory that is fixed to the lower corner of the door and that is connected (fits) directly to the automatic door closer to the floor with accessories required for installation, smooth opening and closing, suitable for use in different environments complete all as specified and directed.

Supply and fixing in repair Heavy duty Stainless Steel 90mm x55mm x12 mm Frameless Bracket Wall to Glass Door Hinges/Glass to Glass Door Hinges, Bathroom Shower Door Bracket Wall Mount Door Hinges - (Suitable for 10mm-12mm thick Glass door incl all necessary accessories complete all as specified.

S&F in repair 25mm dia and 16 gauge thickness Stainless steel Chrome glossy finish toughened glass door handles 305mm long complete all as specified and directed.

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 900mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg.

S&F in repair 15x20x4 Inch stainless steel kitchen basket with stainless steel wire perforated plate fabricated and stainless steel telescopic drawer channel with wall bearing soundless complete

S&F in repair for 16.4cmx 5.8 cmx 5.1cm Heavy Duty Stainless Steel Lock for Glass Door Thickness 10 mm to 12 mm Having 3 Ultra Keys Out Side & Knob Inside with Screws Satin Finish Pack of 1 Set (Glass to Floor, Silver) complete all as specified.

S&F in repair FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT) with Mounting Screw complete all as specified

S&F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

Dismantling timber scantlings unframed 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed.

S& F in repairs Vitreous China Urinal heavy wit high quality ceramic round/Male /Men urinal pot of size width 38cm , height 62cm and depth 31cm including PVC waste pipe 32 mm bore and CP waste coupling and including steel fastner fixed to wall complete all as specified and directed.

S&F in repair sink cock , cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

Dismantling/Demolition/Chipping carefully loose/distressed portions of reinforced cement concrete to a depth or thickness varying from 10 mm to 100mm (reinforcement cut as required to facilitate demolition) work by means of sharp chisel, low impact hamer without damaging existing strong concrete upto the suitabale depth of unsound concrete in beams, roofs, chajjas, columns, staircase, landing, parapets, soffits of slabs and similar suspended work etc incl disposal of broken material/malba to the distance of 50m complete all as specified and directed. Notes :- (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Removal of damaged concrete and surface preparation: M&L for Surface preparation including removal of all loose particles, plaster, tiles, laitance, dust, curing compounds, floors hardeners, oil, grease, fat, bitumen and paint, other fixtures etc. Removal of existing affected, distressed, loose cover concrete including loose damaged concrete from slab up to beyond the corroded steel reinforcements to a depth of 10 mm minimum behind the reinforcement only at affected concrete (Good & sound concrete should not be chipped / damaged) by chipping / hacking with chisel and hammer or by mechanical means like light weight chisel hammer, pneumatic chippers, making saw cut at periphery to avoid feather edge and removal and disposal of debris at designated location within plant premises including labour, tools, electricity, plant and machineries etc. complete as directed by Engg.in charge. Depth of chipping may vary upto 100 mm. Cleaning of rust/ scales/corrosion from reinforcement bars using high pressure water jetting etc. complete. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Reinforcement Rust Removal & Corrosion Protection: M&L for Cleaning as directed & specified all corrosion / rust / scales from reinforcement bars using rust remover ShaliRust Off from STP Ltd or Equivqlent leaving to dry for 30 mins & washing surface with fresh water as required to exposed reinforcement bars complete as specified also providing & applying inhibtion coats/system to exposed reinforcement bars after drying & also new bars after cleaning & removing scales and rust completely as specified. Two component inhibitor coating ShaliPrime Zn primer of STP Ltd or equivqlent. make as approved by engineer shall be used as per manufacturers specification in two coats including all labour tools tackles, necesary surface preparation complete all as specified and directed (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Additional Reinforcement: M&L for cutting, fabricating new reinforcement for providing additional steel reinforcement to compensate corroded reinforcement in existing member etc. and fixing with old existing reinforcement which was reduced by 20% or more of its original diameter as required as provided in original structure and additional steels as directed by EIC as required welding or tying with 16 gauge annealed binding wire complete as per specifications and as directed by EIC. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Epoxy bond coat on old concrete: M&L for Providing and applying one bond coat on the prepared surface to receive new polymer mortar/polymer modified concrete, with two components epoxy based bonding coat ShaliBond Concrete of STP Ltd. in one full coat. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate is inclusive of the meterials all labour, supervision, tools and tackles and transportation etc. complete as per specification and as directed. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Shuttering: Providing & fixing and removing leak proof Shuttering of Plywood Or Steel for micro concrete at all levels with necessary supporting system to keep the shuttering in position during pouring of Microconcrete. Rate includes all material, labour for fixing, removing and keeping in position till the setting of Micro concrete and removing the shuttering. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Microconcrete Reinstatement and jacketting for Columns/Beams/Facia/Chajjas/ Roof Projections: Providing and laying of special repair material micro-concrete, for jacketing of Columns using single component, shrinkage compensated, high strength, high flow cementitious micro-concrete having compressive strength minimum of 50 N/mm2 at 28 days such as ShaliFix MC of STP Ltd or equivalent, blended with washed saturated surface-dry (SSD), graded aggregates of size 3mm to 10mm at 50% by weight of micro concrete (if thickness is 100mm or more) and water as per data sheet and pouring into the shuttering by hopper type form work using suitable arrangement for uniform flow of Microconcrete. The side shuttering can be removed after Minimum of 24 hours, preferably 3 days and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates. (iii) Shuttering, steel reinforcement shall be paid in other relevant items measured and paid saperately in respective items

External Cement plaster: Providing and applying 15mm thick plaster using CM (1:3) for 1st coat and (1:2) for second coat including waterproofing admixture such as ShaliPlast IW of STP Ltd or equivalent @ 150 ml per 50 kg of cement etc. complete. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Protective coatings for Enviornmentally exposed external surfaces: Providing and applying an elastomeric membrane forming system with anti-carbonation and breathing properties, the system, ShaliKote AC WB with Primer, of STP Ltd or equivalent, based on water based acrylic/acrylate polymers. The system consists of one coat primer (ShaliPrime AC WB) over prepared surface and polymer coating (ShaliKote AC WB) to give film thickness of 200 – 225 microns for two coats depending on method of application and smoothness of concrete surface. Surface Preparation should include grinding or wire brushing and removal of all loose particles, dust, oil and other contaminants. For smooth surface finishes, final preparation should include filling of all bugholes / uneven surfaces in the concrete, using suitable putty or equivalent. Polymer coating should be in suitable approved shades, including suitable surface preparation as described above, cost of materials and labour for applying the above coating, etc. (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Ramdev and Sons (BID ID -3308840)

Priya Construction co. (BID ID -3308312)

divyarsh entrprise (BID ID -3309128)

ARTI CONSTRUCTION (BID ID -3309253)

ALBA AC AND REF SERVICES (BID ID -3309492)

Abhishek Enterprises (BID ID -3308057)