REPAIR TO SEWAGE LINE, MANHOLES, SEPTIC TANK INCLUDING CLEANING OF LINES ETC AND OTHER RELATED REPAIR WORKS FOR 7A, 7C AND 7D AREA AT MIL STATION PITHORAGARH UNDER GE PITHORAGARH

DESCRIPTION OF ITEMS

M&L for cleaning of blockage of traps of any type or of any size by way of cleaning, desluging foreign material as well as roding of sewer line from trap to first manhole manually/ mechanically and keeping sewer line functional upto first man hole manually entering from floor trap/nahani trap/water closet/soil waste/vent pipe/gully trap and removing the sludge to out of MoD land complete all as directed by Engr-in-charge. Note: The rate quoted by the tendere are deemed to be included for the following provisions:- (a). The contractor shall provide necessary Job card serially numbered to the concern JE/AGEs (b) The concern JE shall issue job card to rep of contractor mentioning nature of complaint location with date and time based on the complaint received from users in complaint registerduly signed by users and contractor shall attend the complaint same dayotherwise a panel recovery of double the quoted rate sahll be recovered from Contractors claim.

Excavation in trenches, n.exc. 1.5 m wide and n.exc. 1.5 m in depth and getting out inhard/dense soil complete all as specified and directed.

All as per item No.02 above but depth exc.1.5m but n.exc.3.0m and getting out complete.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n.exc. 25 cm complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc. 50m and depsoited where directed at a level n.exc. 1.5m above starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed. ( Inner girth only measured)

Add or deduct for each 25mm girth or part thereof over or under 30cm inner girth in cement concrete, complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor and pavings n.exc 15 cm thickness (below and above ground level) all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, set in CM 1:6 complete all as specified and directed.

M & L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, beinding spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.

Demolition of cement concrete block masonary, built in cement mortar including all quoins, arches, pillars etc. and precast concrete articles complete all as specified and directed.

M & L for precast cement concrete block masonry 1:3: 6 type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, including to be finished even and smooth (without using extra lime or cement) finishing the surfaces fair and even, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective items of schedule 'A'

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for 15mm thick rendering on other than faces of brick/concrete surfaces in CM 1:6, including finishing the surfaces fair and even complete all as specified and directed.

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified.

S&F 150 MM bore Reinforced concrete pipes, class NP2, laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately )

S&F 300 MM bore Reinforced concrete pipes, class NP2, laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 300 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately )

Taking up existing cover of soak well / septic tank of any size and cleaning of same including dewatering and digging out sludge, mud state and removing the sludge to a distance exc. 250m and n. exc. 500m and disposed off as directed by the Engineer-in-charge cleaning of inlet & outlet pipes and tank with clean water and placing the cover in position, complete all as specified and directed. Note :- Measurement shall be made for actual quantity of sludge, removed from the tank.

Taking up existing cover of man holes and cleaning of man holes to any depth and of any size by taking out semi-solid/solid sludge complete and removing sludge to out of MoD land and placing the man hole cover in position complete all as specified and directed by Engr-in-Charge.

Cleaning of 100mm bore and up to and including 150mm bore sewage lines and blocked pipe lines and disposal of waste materials / spoil up to a distance n. exc. 50m by any means complete all as directed. Note :- Relaying / refixing or S&F of new pipe etc where required and cleaning of manholes shall be measured seperately.

Cleaning of 200mm bore and up to and including 300mm bore sewage line including manhole and blocked pipe lines and disposal of waste materials / spoil up to a distance n. exc. 50m by any means complete all as directed. Note :- Relaying / refixing or S&F of new pipe etc where required and cleaning of manholes shall be measured seperately.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) cement concrete 1:2:4 type B-1 smooth finised and reforming benching as required for 150 mm to 300 mm interrnal dia of pipe

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store

S&F PVC (SWR) pipes 150 mm single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete

S&F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete

S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete

S&F 100mm bore PVC (SWR) bends any radius

S&F 75mm bore PVC (SWR) bends any radius

S&F 150mm PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 100mm PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 100mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type -C2 using 40 mm graded stone aggregate as in floors etc, finished rough to receive floor finishes complete all as specified and directed.

S&F heavy duty outdoor tiles 300x300 mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 including dismentalling complete

Dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed

M&L for refixing of interlocking paver blocks with grey cement and pigment complete all as specified and directed.

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 Grade all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation.

S&F in repair vitreous china urinal half stall type flat back size of white with grating and union for discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe complete all as specified and as directed

S& F in repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

S&F in repair brackets for WHB, of angle iron 35mm x 35mm x 5mm of required length with and including embedding in PCC 1:2:4 type B1 and two coats of painting with synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair chromium plated Toilet paper holder incl movable flap and fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, (flat back or angle back type) of size 580x450 mm including supplied and fixing angle iron braket and CP Pillar tap fancy type 15 mm bore,CP waste coupling, PVC waste pipe 32 mm dia, and 01 No PVC connection 15 mm dia & 450 mm long complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, (oval or any other type) of medium size mm including supplied and fixing angle iron braket and CP Pillar tap fancy type 15 mm bore,CP waste coupling, PVC waste pipe 32 mm dia, and 01 No PVC connection 15 mm dia & 450 mm long complete all as specified and directed.

S&F in repair sink without drainage board made of stainless steel 1 mm thick with plug and washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick with plug and washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 250 ltrs but n.exc 500 ltrs in any position and removing from site complete all as specified and as directed.

Dismantling PVC water tanks of capacity exc 500 ltr but n.exc 1000 ltrs. in any position and removing from site complete all as specified and as directed.

S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed.

S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 1000 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Chromium plated Health Faucet for bore size 15mm (flexible tube and hand shower) ,wall mounting type suitable for EWC; with CP nuts and washer incl square hook ABS , of length 900mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 6 cm wide complete all as specified and directed.

S&F in repair CP wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repair CP wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed .

Taking down GI pipe of any grade of 15mm bore including fittings complete all as specified and directed.

Taking down GI pipe of any grade of 20mm bore including fittings complete all as specified and directed.

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm complete all as specified and directed.

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20 mm complete all as specified and directed.

S & F in repairs PVC valveless,syphonic action type,low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified and directed.

S&F in repair chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair gratings of 100mm dia made of stainless steel with waste hole complete all as specified and directed

S&F in repair gratings of 125mm dia made of stainless steel with waste hole complete all as specified and directed

S&F in repair Chromium plated shower rose with shower arm round 100mm ABS full chrome with min arm 225 mm with or without swivel joints, any size, including fixing with GI pipe of 15 mm bore complete all as specified and directed.

S&F in repair wash basin waste coupling 32 mm dia of CP (half or full threaded) Minimum weight 45gms complete all as specified and directed.

S&F in repair sink waste coupling 40 mm dia of CP (half or full threaded) Minimum weight 60 gms complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and as directed

M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in vertical surfaces etc laid over with and including 10 mm thick rendering for backing layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in vertical surfaces laid over with and including 10 mm thick rendering for backing layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/300x450x 7mm thick with and including 10mm thick rendering for bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white cement complete all as specified and as directed.