Urgent Repairs to HLB at Km.0/0 to 0/4 of Anantapuramu - Raichur road & Km 354/2 to 354/4 of Hyderabad - Bangalore road in Anantapuramu District

Construction of precast VRCC railing of M20 grade using HBG crushed stone aggregate of size not exceeding 12 mm and fine aggregate conforming to table 1000-2 true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical posts not to exceed 2000mm, leaving adequate space between vertical posts for expansion including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges as per approved drawings and technical specifications for finished item of work as per MoRT&H Specification 2703, 1500, 1600, 1700(5th Revision)

Painting to old walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats+primer

Providing centreline marking of 300 cm length and 10 cm width with a gap of 450 cm with thermoplastic paints including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges necessary for successful completion of the work as directed by the Engineer - in - charge and conforming to IS : 164-1981 (1st revision reaffirmed in 1986) and clause 803 of MOST specifications for Road & Bridge works and also conforming to IRC 35-1997.

Providing and fixing Reflective pavement markers (Road studs) made of plastic body moulded from HIPS (Hi-impact polystyrene) or ABS or ASA (Acrylic Strene Acrylonitrite) and reflective panels shall consist of providing total internal reflection of the light entering the lens face and conforming to ASTM, BS and complying to guidelines issued by MOST circular no.RW/NH-33023/10/97-DO III dt.11-6-1997. The height , width shall nor exceed 20 mm, 130 mm and the area of each retro-reflecting surface shall not be less than 13sqcm and the slope of retro-reflective surface shall preferably be 35 (+ / -) 5 degree to base. Fixing will be without nails and the reflective marker shall be fixed to the road surface using the adhesives and the procedure recommended by the manufacturer and as per para 6.2 of the MOST circular including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading, unloading charges, site clearance etc., and complete necessary for successful completion of the work as directed by the Engineer - in - charge.Providing centreline marking of 300 cm length and 10 cm .width with a gap of 450 cm with thermoplastic paints including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges necessary for successful completion of the work as directed by the Engineer - in - charge and conforming to IS : 164-1981 (1st revision reaffirmed in 1986) and clause 803 of MOST specifications for Road & Bridge works and also conforming to IRC 35-1997

Providing and fixing Cautionary/Warning sign boards of size900 mm equilateral triangle made out of Type -IV of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and confirming to IRC 67;2012 for full background of White color and letters/logos done by screen printing in black color, boarders by screen printing in Red color and fixed over 4mm aluminium composite material sheet having minimum 0.5 mm thick aluminium skin on both sides with back side painted grey color and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on MS angle post of size 75x75x6 mm with clear height of not less than 2.1 m from ground level to the bottom of the board.The signost should be ainted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white color with banks of 30 cm height .The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M 15 Concrete foundation of size 450x450x600 mm including cost and conveyance of all materials , equipment , machenery and labor with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

Supplying and installation of Hazard Markers/Delineators using M.S angle of size 55x55x6 mm and 120cm high above ground level painted with two coats of Black and White stripes of 15cm wide with first quality synthetic enamel paint over one coat of appropriate painter of approved brand, color, with 30cm x90cm Type-IV of ASTMD 4956-09 high intensity Prismatic Retro reflective sheeting of yellow color and confirming to IRC 67;2012 fixed over 3 MM aluminum composite material having minimum 0.30 mm thick aluminum skin on both sides with standard supports consisting of alternately black and yellow with black stripes screen printing sloping downward at an angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30cm x30cm and 50 cm depth filled with CC M-20 including cost and conveyance of all materials , equipment machinery and labor with all leads and lifts, loading and unloading charges necessary for successfully completion of the work on any road in division as directed by Engineer-in –Charge and conforming to IRC 67-2012 & MORTH specification NO.805 and approved drawing etc, complete for finished item of work.

Providing and fixing Village name board of size 1200 x 450 mm made out of Type - IV of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and confirming to IRC 67;2012 for full backgroundr green color and white letters and fixed over 3mm aluminium skin on both sides with back side painted grey color and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on MS angle post of size 75x75x6 mm with clear height of not less than 2.1 m from ground level to the bottom of the board.The signost should be ainted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white color with banks of 30 cm height .The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M 15 Concrete foundation of size 450x450x600 mm including cost and conveyance of all materials , equipment , machenery and labor with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

PProviding and fixing junction board of size 1500x1200 mm made out of Type -IV of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and confirming to IRC 67;2012 for full backgroundr green color and white letters and fixed over 4mm aluminium composite material sheet havind minimum 05mm thick Aluminium skin on both sides with back side painted grey color and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on MS angle post of size 75x75x6 mm with clear height of not less than 2.1 m from ground level to the bottom of the board.The signost should be ainted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white color with banks of 30 cm height .The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M 15 Concrete foundation of size 450x450x600 mm including cost and conveyance of all materials , equipment , machenery and labor with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.