PROVN OF QTY 32 X CUPBOARD SHUTTER WITH SHELF PVC FOR MD ACCN QTR NO 2/R/8 OF INF BN-V AND SPL REPAIR TO BLDG NO P-02 (PERS LINE) OF FD HOSP II UNDER GE (N) BINNAGURI

S&F factory made solid PVC frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick PVC sheet of density 600Kg/cbm having pattam width of 50mm and thickness of 10mm. All three frame length reinforced with 19mm x 19mm MS square tube of 19 gauge. mitre cut at two corners and joined with two nos of 150mm long brackets of 15X15mm MS square tube or joint by fusion hit welding. The door frame shall be fixed to the wall thickness using 8Xthroughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 8/100mm long MS screws through the frame by using PVC fasteners. A minimum 4 nos of screws to be provided for each vertical member and minimum 2 nos of screws to be provided to the horizontal member etc.complete all as specified and directed.

M&L factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.0-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company.Door should be water proof, turmite proof, fire retardant and having good screw holding capacity complete all as specified and directed including all connected items.

M&L providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVC sandwich with 1mm thick plain PVC sheet on both sides suitably fixed in MS angle frame complete all as specified and as directed.

S&F 150mm long stainless steel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F Stainless steel fabricated type handle 250mm long complete all as specified and as directed

S&F 100 mm Hasp and staple, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified .

S&F in repair stainless steel curtain rod 25 mm dia, mild steel chromium plated with fixing brackets, stops,rollers etc. complete all as specified and as directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps finished even & smooth with using extra cement complete all as specified and directed

M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.