REPAIR / MAINTENANCE OF INTERNAL WIRING, FITTINGS/FIXTURES AND ALLIED WORKS AT OP, NP, RP, MES, TECHNICAL AREA AND OBD AT AF STN HALWARA

Amount

Taking down aluminium / copper point wiring with surface / concealed stove enamelled steel / PVC conduit or wooden batten (light, fan, socket or power) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good the disturbed surfaces of walls, floors etc, complete all as specified and directed.

M & L for concealed Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in and including PVC conduit not less than 19/20 mm dia with all fittings, sunk in MS Pressed steel terminal boxes of suitable depth and 1.6mm thick (duly painted with two coat of anti corrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches / sockets and fan regulators etc including cutting, chasing and making good wall / ceiling surfaces, complete all as specified and directed.

All as per item No. 2 above but for ceiling fan, one point controlled by one switch.

All as per item No. 2 above but for Exhaust fan point, one point controlled by one switch.

All as per item No. 2 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 2 above but for socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 2 above but for call bell point, one point controlled by one switch.

All as per item No. 2 above but for 2.5 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire.

M & L for Surface Point wiring for light points with PVC insulated unsheathed FRLS two runs of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in and including surface PVC conduit/ PVC casing & caping with PVC gang box suitable ways fixing on wall with all fittings/ accessories for mounting of switches/sockets and fan regulators etc, complete all as specified and directed.

All as per item No. 9 above but for ceiling fan, one point controlled by one switch.

All as per item No. 9 above but for Exhaust fan point, one point controlled by one switch.

All as per item No. 9 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 9 above but for socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 9 above but for call bell point, one point controlled by one switch.

All as per item No. 9 above but for 2.5 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire.

Supply and fixing Switch piano type one way 5 amps 240 volts, complete all as specified and directed.

Supply and fixing Bell push flush type 5 amps 240 volts, complete all as specified and directed.

Supply and fixing Socket outlet 5 pin 5 Amps flush type, complete all as specified and directed.

Supply and fixing for Switch piano flush button single pole one way 15 amps 240 volts, complete all as specified and directed.

Supply and fixing for Socket out let 2 in 1, 6 pin, 5 and 15 amps multi purpose flush type, 230 volts, complete all as specified and directed.

Supply and fixing electronic fan regulator step, 250V flush type on the exiting phenolic laminated sheet etc, complete all as specified and directed.

M&L for concealed Point wiring ( MODULAR FITTING ) for light point controlled by one switch with 1.5 Sqmm PVC FRLS, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable confirming to IS-694 and FRLS, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, drawn through in and including rigid PVC conduit of suitable size, with all fittings and accessories including modular sunken/terminal boxes for modular wiring, mild steel sheet recessed in wall including modular white cover with frame with a coat of black bituminous paint and suitable for fixing of switches / sockets etc. complete including cutting/chasing and making good wall/ceiling surfaces, complete all as specified and as directed.

All as per item No. 22 above but for ceiling fan point, one point controlled by one switch.

All as per item No. 22 above but for Exhaust fan point, one point controlled by one switch.

All as per item No. 22 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 22 above but with one socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 22 above but with call bell point, one point controlled by one switch.

All as per item No. 22 above but with 2.5 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire.

S&F Modular switch flush type, one way 5 Amp, complete all as specified and directed.

S&F Modular Bell push, flush type, 5 amp, complete all as specified and directed.

S&F Modular socket outlet 2 in 1, 5 pin, 6 Amp, complete all as specified and directed.

S&F Modular Switch 15 amp flush type, complete all as specified and directed.

S&F Modular Socket outlet 2 in 1, 6 pin, 6 and 16 Amp, complete all as specified and directed.

S&F Modular Electronic fan regulator 2 module, 240 Volt, complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminals, complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings, complete all as specified and directed.

Supply & fixing in replacement LED light fitting, 20 W, 4 ft long 230V, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired, complete all as specified and directed.

Supply & fixing in replacement LED light fitting 2 Feet long 10 Watt LED Batten light for mirror and as wall light application, complete all as specified and directed.

Supply & fixing in replacement recess mounting LED slim ceiling light with extruded aluminium housing and milky diffuser with 36W, 2'X2' (600X600X11mm) LED slim panel, complete all as specified and directed.

Supply & fixing in replacement LED flat Bulkhead fitting 10 watt complete and fixing to wall / celing including fixing arrangement with clamps/ screws/nuts/ bots /washers etc and connecting, complete all as specified and directed.

Supply & fixing in replacement of building security light fitting 35 W, LED New generation, Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadwayluminars with high power LEDs as light source and electronic drive including connecting, complete all as specified and directed.

Supply & fixing in replacement security light mounting bracket, GI pipe 40mm dia medium grade for mounting bracket bent to shape 0.6 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers and applying two coats of aluminium paints over a coat of Zinc oxide primer, complete all as specified and directed.

Supply and fixing in replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size for up to 350mm sweep with all accessories, fixing on wall, complete all as specified and directed.

Supply and fixing in replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size above 350 mm to 450 mm sweep with all accessories and fixing on wall, complete all as specified and directed.

Supply & fixing in replacement decorative LED gate light 40 Watt, made of high grade unbreakable polycarbonate material suitable for mounting on pipe dia 40/50 mm including conecting and fixing on post top with necessary fixing arrangement, complete all as specified and directed.

Supply and fix in repair flexible cord copper conductor of size 1.00 Sqmm, twin core, flat cable for connection to light fitting/fans from ceiling roses, complete all as specified and directed.

M&L in repair Sub main wiring with PVC insulated cable of size 2 X 4.0 Sqmm + 1 X 4.0 Sqmm earth wire multi stranded copper conductor FRLS drawing into and including heavy duty 25mm dia surface PVC conduit and continuous earth wire complete and making good to disturbed surfaces of wall/ floor etc, complete all as specified and directed.

All as per item No. 47 above but sub main wiring of size 2 X 6 Sqmm + 1 X 6.0 Sqmm as earth wire.

Supply and fixing in replacement polycarbonate AC Box with Industrial Socket 16Amp 3 Pin. The AC Box shall be anti-acid & anti corrosive, Degree of protection against mechanical load shall be IK08 (5 Joule) in accordance with IEC 62262. The Box DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket shall be internally embedded made of polyurethane. Lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked) and they will be sealable without any accessories. The panel shall pass glow wire test 960 degrees Centigrade in accordance with 60695-2-11 [flame retardant and self-extinguishing], complete all as specified and directed.

S & F in replacement Meter boxes made of Lid PC and base is polystyrene. Meter Boxes Size 217 x 253 x 115 mm in Grey colour. Junction Box IP 65 Thermoplastic PS Polystyrene weatherproof Junction Box with multi level knockouts for cable glands in different sizes. The pre-moulded knockouts shall be available on top and bottom of the junction box to enable cable entries from both direction. The Meter box shall have an optional cable entry at the bottom the box via pre-moulded knockout to enable pole mounting option. Lid fasteners self closed will be tool operated. it will be sealable with accessories. In the event of formation of condensed water, the Meter box shall have a minimum of two condensation knock-outs inside to ensure optimum safe performance. The Meter box shall fulfill the relevent IS for Weatherproof, Rainwater proof, temperature resistant, Flame – retardant, Self-extinguishing, UV Resistant, the Meter Box with Suitable Glands 3 Nos shall have each and chromium plated clamps, nut bolts complete all as per manufacturer’s instructions.

Supply and fixing in replacement Loadline Vertical TPN (VTPN) DB prewired distribution board doble door, 8 way TPN IP 66 ( in accordance with IEC 60 529) including one No MCCB 125 Amps as incomer and 4 Nos of MCB TPN 40 Amp-16 nos, MCB SP-8 Nos, MCB SPN as required for outgoing, double door type Lid , made of high quality Polycarbonate (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, self-extinguishing, having high impact, made of halogen and silicon free recyclable material conform to RoHS directive 2002/95/EC ) enclosure 415V with 63 Amps rated standard busbar of suitable size. The high flexibility of the modular enclosure system allows an easy upgrading of the assembly including bus bar system at any time even after many years. The DB shall have high grade gasket made of Polyurethane. Enclosure shall be totally insulated, protection class II. And rated insulation voltage should be 690V AC as per IEC 60664, complete all as specified and directed. Note :- The feeder pillar shall have certificates and safety features for Weather proof, UV resistant according to relevent IS withstand glow wire test, flame retardant and self-extinguishing in nature, Intended to be operated by ordinary person. Toxic behaviour: silicone- and halogen-free, complete all as specified and directed.

S&F in replacement IP 65 Thermoplastic PS polystyrene weatherproof MCB Box suitable for any makes MCBs, for 12 Way (14 MCB's SP Cut) with multi - level knockouts for cable glands in different sizes. Double door with IP-65 protection single phase 240 volts, including neutral link fixed flush concealed in wall including cutting/chasis in wall /surfaces for fixing DB and making good to distributed wall/surfaces to match with existing specification. The MCB box shall fulfill the following technical features :- • with sealable lid. • locking device for hinged lid and sealing facility with accessories • with cable entry cover • protective cover can be cut out The MCB box shall fulfill the following standards: Weatherproof : Rainwater proof, temperature resistant, IP65 IEC 60670-24, Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 750 deg C. IEC 60529 : IP 65 degree of protection.

All as Per Item No 52 IP 65 Thermoplastic PS polystyrene weather proof MCB Box suitable for any makes MCBs, for 8 Way ( 9 MCB's SP Cut ) with multi - level knockouts for cable glands in different sizes. Double door with IP-65 protection single phase 240 volts, including neutral link fixed flush concealed in wall including cutting and chases to wall for fixing DB and making good distributed wall/surfaces to match existing specification.

All as Per Item No 52 IP 65 Thermoplastic PS polystyrene weather proof MCB Box suitable for any makes MCBs, for 4 Way ( 6 MCB's SP Cut ) with multi - level knockouts for cable glands in different sizes. Double door with IP-65 protection single phase 240 volts, including neutral link fixed flush concealed in wall including cutting and chases to wall for fixing DB and making good to distributed wall/surfaces to match existing specification.

S&F in replacement Sheet metal enclosure DB SPN, 2 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting, complete all as specified and directed.

Supply and fix in replacement MCB TPN 'B' series, 415 volts, 50Hz, 63 Amps, suitable for high inrush current loads, complete all as specified and directed.

Supply and fix in replacement 'B' series MCB SPN 40/32 amps, 240 volts, 50Hz, complete all as specified and directed.

Supply and fix in replacement 'B' series MCB SP 6 to 32 amps, 240 volts, 50Hz, complete all as specified and directed.

Supply and fix in repair 1100 Volts grade heavy duty service line cable PVC insulated stranded aluminium conductor, twin core cable, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or cicrular of aluminium condoctors size 10 Sqmm stranded conductor, complete all as specified and directed.

All as per item No.59 but stranded aluminium condoctors size 6 Sqmm.

Supply and fix in repair of PVC flexible copper coductor cable of size 2.5 sqmm, 3 core as connections to MCB/socket to geysers, complete all as specified and directed.

Supply and fix in repair door bell, Ding Dong AC, 230 volts, single pole, complete all as specified and directed.

Supply and fixing in repair LED Bollard light 13 watt, 900mm, 5700K, IP 54 made of gray color coated aluminum, complete all as specified and directed. Note:-The rate are deemed to be included for foundation in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate including excavation, earth work etc required for prpper fixing of bollard Lights.

Supply and fixing in replacement recess mounting LED slim ceiling round light 15W, complete all as specified and directed.

M/S SANGA SINGH AND CO (BID ID -3464761)

SWARN SINGH AND CO. (BID ID -3468028)