SPECIAL REPAIRS TO TOILETS AND BATHROOMS OF CHEETAH AND DAREDEVIL SQUADRONS PHASE II AND PROVN OF POL STORE AT SHQ AT INA EZHIMALA

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as directed by Engineer-in-Charge.

Demoltion of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed by Engineer-in-Charge.

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each but without taking off shutters from the frames all as directed by Engineer-in-Charge.

Taking down chowkats or frames n.exc. 1.5 Sqm each but without taking off shutters from the frames all as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 15mm dia complete

Taking up or down steel tubing and connections, 20mm dia complete

Taking up or down cast iron waste and vent pipes of 100 mm dia complete.

S&F 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr.

S & F powder coated aluminium window and ventilator shutters side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

S&F, powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge

S & F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beaking screws etc complete all as specified and as directed by Engineer-in-Charge

M&L 4mm thick frosted/ tinted sheet glass ordinary quality exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and as directed by Engineer-in-Charge

S&F in repair aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete.

S&F in repair Aluminium Composite Panel 4mm thick of any colour and shade of Alu Bond or equivalent, fixed to wooden / aluminium frame work as in door/cupboard shutters all as specified and as directed by Engineer-in-Charge

S&F 100mm mild steel butt hinges, cold rolled medium weight

S&F 150mm Aluminum anodised barrel tower bolts of extruded section

S&F 125mm extruded aluminium anodised alloy handles fabricated type

S&F 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy

M&L for cement concrete 1:2:4, type B1 (20mm graded stone aggregate) in roof slab padding and roof kerb preparatory to roof treatment, complete all as specified.

M & L for coloured Non-skid ceramic tiles 600x 600x7 to 8 mm thick fixed on floors with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600x300x7 to 8 mm thick , fixed on walls with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge.

M&L machine cut granite stone slab 20mm thick of approved colour and shade as in steps, jambs, pillars, window- cills, cooking platforms,WHB platform and like over and including 15mm thick screed bed in CM 1:4; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified. The rates shall be inclusive of cutting holes in any size and number, rounding edges etc whatever needed to facilitate the fixing of fittings and fixtures on Granite slab. The hole portion will not be deducted from measurement and payment.

Rounding to edges of stone slabs one edge, such as in cooking platforms,WHB platform and other similar situvations complete all as specified and as directed.

M&L for Precast RCC 1:2:4, type B-1 (using 20 mm graded stone agg) in slabs , landings, and in shelves and the like set in CM 1:6

Supply and fix in repair vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. Make :- Hindware Cat No. 10049 or equivalent in Parryware/Cera

Supply and fix in repair vitreous china, wash down water closet (EWC) starwhite with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified. Make: HINDWARE, Cat. No 20079 or equivalent in Parryware/Cera

S&F in repair vitreous China Urinal, half stall type, with and including waste coupling CP of 40 mm and all fixing acessories complete.Make: CERA, HINDWARE or Equivalent.

S&F in repair vitreous China Urinal partition, with and including all fixing acessories complete. Make: CERA, HINDWARE or Equivalent.

S&F pillar taps 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete Make Jaquar Model No CON-CHR-127BKN or Equivalent.

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets. Make hindware/ Parry ware or equivalent

S & F in repairs Bib tap 15 mm size, brass chromium plated rust proof complete Make Jaquar Model No COS - 103037 or Equivalent

Supply and fix in repairs 15 MM DIA Angular stop valve, Brass chromium plated Make :- Jaquar Model No FLR - CHR-5053 N or equivalent

S&F in repair Brass CP wall mixer 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-charge complete Make Jaquar Model No FLR-CHR-5219N or Equivalent

S&F in repair Urinal spreader of brass chromium plated fancy type suitable for 15 mm bore pipe, Make Cera Model No F8070201 or Equivalent

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair Stainless steel towel rail 60 CM long, Make Jaquar Model No ACN-CHR-1111SM or equivalent approved make.

S&F in repairChromium plated towel ring round with round flange.Make Jaquar Model No ACN-CHR-1121 BN or equivalent approved make.

S&F in repair stainless steel soap dish of approved pattern all as specified and as directed Make Hindware or equivalent approved make.

S&F in repairCP Brass Shower rose with arm complete Make Make parry ware Model No T9809A1 or equivalent in Jaguar / Roca

S&F CP grating of 100 mm da including jointing with solvent cement all as specified and as directed

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified

Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified.

S & F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) pipes of 50 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bend of 50 mm dia.

S&F 110mm bore PVC SWR bend.

S&F 110mm bore PVC SWR bend with acces door complete all as specified.

S&F 110mm bore PVC SWR branch piece single 'Y' equal or unequal.

S & F in repair 110 mm PVC (SWR) floor trap plain including jointing with solvent cement.

S&F 110mm bore PVC SWR junction single (single T) equal or unequal

S&F 110 mm bore PVC SWR junction single tee with acces door complete all as specified and directed

S&F in repairChromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete. Make Jaguar model No ALD CHR 565 or equivalent approved make.

S&F in repair CP brass tioilet paper holder Make Jaguar Model No Can-1153N or equivalent

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster (Work in foul condition and in shaft) complete all as specified

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) all as specified. Note - Liquid water proofing compound will be measured & paid separatly.

Supply only Liquid Water proofing compound of approved quality.

M&L for preparation of new platered surfaces and applying two coat of weather proof paint appex ultima or any equivalent make on wall over a coat of wall primer (Work in foul condition and in shaft) including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M&L for complete removal of existing treatment and applying two coats two coat of weather proof paint appex ultima on wall over a coat of wall primer including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

S & F in repair 110 mm PVC (SWR) gully trap setting and jointing with solvent cement.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall nexc 150 Sqcm all as directed by Engineer-in-Charge.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall exc 150 Sqcm and n.exc 400 sqcm all as directed by Engineer-in-Charge.

Removing building materials etc. (other than materials considered under schedule of credit) upto a distance of 3.00 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying two coat of oil bound distemper on ceiling complete as specified and as per manufacturers instructions.

Surface excavation in n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; and not exceeding 10 sqm on plan for foundation, etc. and getting out in hard/dense soil complete, all as specified.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete.

Use and waste formwork to sides of rough finished surfaces of concrete footings

Use and waste for formwork to rough finished flat surfaces of concrete columns

Use and waste for formwork to rough finished flat surfaces of concrete beams

Use and waste for formwork to rough finished flat surfaces of concrete Slabs

M & L for reinforced cement concrete (design mix) M-30, using 20 mm grded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M & L for reinforced cement concrete (design mix) M-30, using 20 mm grded aggregate in columns, pillars, piers, posts and struts

M & L for reinforced cement concrete (design mix) M-30, using 20 mm grded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span

M & L for reinforced cement concrete (design mix) M-30, using 20 mm grded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

S&F Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips

All as per item No 79 here in before but 5mm dia over upto and including 8mm dia TMT bars

All as per item No 79 here in before but 5mm dia over upto and including 10mm dia stirrups

M&L Laterite stone walling of regular coursed , well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.

M&L rendering 15mm thick on stone masonry surfaces in cement mortar 1:4 and finish the surface even and smooth

M&L rendering 10 mm thick on stone masonry surfaces in cement mortar 1:6 and finish the surface even and smooth(without using extra cement)

10mm thick rendering on fair faces of brick work or concrte surfaces in ceilings Cm 1:3 finished even and smooth without using extra cement.

Supply only waterproofing compound

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded

M & L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified. (Note : aluminium beading shall be measured separately)

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L, applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface for laying APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) by forced application complete all as specified.

M&L two coat of oil emulsion distemper on walls including preperation of new plastered surfaces and priming with alkali resistant primer on plastered surfaces,preparatory to distempering.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shad : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and as per manufacturers instructions and as directed.

M&L, preparation of new plastered surfaces and applying three coats of white wash on ceiling all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm.

Spreading and levelling in layers n exc. 25 cm thick filling under floor

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stones or boulders.

M&L cement concrete 1:4:8 type D-2 100 mm thick,(using 40 mm graded stone aggregate ) as in filling and mass concrete.

M&L PCC 1:2:4 type B1 ( using 20 mm graded aggregate) 40 mm thick as in flooring.

M&L Cement concrete100mm thick type B-1, 1:2:4 (20mm graded aggregate) finished Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green.

S&F 38mm thick glass dividing strips, 3 mm thick, inserted in position, conform to design all as directed by Engineer- in-charge.

Forming Construction joint 30mm deep x 10mm wide filledwith sealing compound - Grade 'B'

M/L PCC 1:3:6 type C2 ( using 40 mm graded aggregate) 75 mm thick as in plinth protection/ hard standing.

M & L of sand filling in, including spreading , levelling, watering and well ramming in layers not exc 25 CM thick on ground

M&L for Point wiring complete as specified with 1100 volt grade confirming to IS 694, 1.5sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through and including stove enamelled steel conduit of suitable size but not less than 20mm dia , with all fittings, fixed on wall/ceiling /floor including fixing of rotary switches and duly earthed with same cable as for point wiring above but green in colour as continuous earthing wire complete all as specified & directed by Engineer-in-Chrage. Note (i) : Necessary stove enamild steel conduit junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

One light/ point controlled by one rotary switch

Supply and fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge.

Supply and Fix LED tube light fitting 1 x16W flameproof type FLP-WP made of aluminium alloy LM6, with electronic ballast, bipin holders, connector block, recommeded for Gas / vapour group of IIA & IIB and zone 1&2 IP 65protected etc. complete with all accessories prewired and including connecting up with three core 1.5Sqmm FRLS copper coductor complete all as specifed and directed by Engineer-in-Charge. Make : Crompton / Sudhir / Baliga / Shyam

Supply and fix Flame proof Exhaust fan 380 mm (15") sweep 1440 RPM single phase complete all as specified and directed by Engr-in charge. Make :- Sudhir/Baliga/Shyam/Crompton

Supply and fixing Sheet steel enclosure MCB DB SPN - 4 ways with 200 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB single pole & neutral 240 volts, 32amps, 10KA , C-Curve complete all as sepcifed and directed by Engineer-in-Charge.

Supply and fixing MCB single pole 240 volts, 6-32 amps, 10KA, C-Curve complete all as sepcifed and directed by Engineer-in-Charge.

Supply and fixing of XLPE insulated , armoured heavy duty electric cable with aluminium conductor,1100 volts grade,cross section area 6 sqmm 2 coe all as specified and directed by Enge - in- charge.

Supply and spreading riddled soil as earth cushioning to UG cable by using IS sieve to separate the composite particle/ roots etc. and refilling/ spread in trenches as cushioning and rammed down to form a solid bed complete all as specified and directed by Engineer-in-charge. Note: (i)- Punned thickness only will be measured and paid. (ii) Excavated approved soil shall be riddled by using sieve to separate composite particles as per IS.

Supply and lay PCC un-reinforced cable cover of size 250mmx150mmx40mm, class LV type I flat for cable protection complete all as specified and as directed by Engineer-in-charge.Note: Contractor has to produce PCC cable cover test certificate from the manufacturer.

Supply and fix of multi criteria detectors with base for below for false ceiling model FAPT 851B501 certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 including taking down old unserviceable all as directed by Engineer-in-Charge. Make: Honey well or equivelent Approved by GE.

S & F Fire extingusher portable 4.5 Kg CO2 type as per IS 2878 all as specified and as directed by Engineer-in-Charge.

Supply and fix pressure type DCP Fire extinguisher 6 KG capacity with ISI mark including taking out old one and stand etc all as directed by Engineer-in-Charge.

Supply and fix AFFF fire extinguisher 9 litre capacity with ISI mark including taking out old one and stand etc all as directed by Engineer-in-Charge.

Supply and fixing of XLPE insulated armoured heavyduty electric cable with aluminium conductor,1100 volts grade with cross sectional area 4 sqmm,4 core complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete (except concealed conduit) including fittings such as switches ceiling roses, pendent, regulators, sockets, earth plug and socket etc and making good matching to the existing colour to the disturbed surface.

Material and labour for colour code point wiring conceald FRLS PVC insulated and unsheathed cable with 2.5 Sqmm copper conductor single core multistrand 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size of modular GI metal box for modular cover plates to be fixed the switchs, sockets, regulators etc. and including 2.5 Sqmm earth wire copper insulated wire connected to common earth dolly all as specified .

Material and labour for colour code point wiring conceald FRLS PVC insulated and unsheathed cable with 1.5 Sqmm copper conductor single core multistrand 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size of modular GI metal box for modular cover plates to be fixed the switchws, sockets, regulators etc. and including 1.5 Sqmm earth wire copper insulated wire connected to common earth dolly all as specified .

S&F Moduler switch one way 6A ,1 module ISI marked 230V,50Hz supply complete all as specified.

S&F Moduler switch one way16A ,1 module ISI marked 230V,50Hz supply complete all as specified.

S&F Moduler socket one way16A ,1 module ISI marked 230V,50Hz supply complete all as specified.

S&F modular white cover plate with frame1/2/3 module.

S&F modular white cover plate with frame6 module

S&F Ceiling rose. 3 terminals PVC isolated body ISI marked base.

S&F in replacement wall mounted 20 W LED 4 ft batten output lumens greater than 100 lumen/watt,CRI = >60, CCT = >5500, Internal surge protection up to 2KW , Power Factor>0.95 having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver making connection to ceiling ros to fitting with 3 core 1sqmm copper conductor completeall as specified and directed by Engr -in-charge. Make Havells /Philips/Crompton

Supply and fix Exhaust fan Heavy Duty AC single phase 230/240 volt of size 300mm sweep making connections to ceiling rose to fitting worth 3 core 1.5 sqmm copper conductor complete all as specified and directed by Engr-in-charge including removing existing BER exhaust fans & deposit to MES store Make : Havells/ Crompton/Usha.

Remove the existing LED light fittings(Any type) and refix the same after tiling work as per direction of Engr in charge

Supply and fixing LED Down ligher fitting 15 W out put lumens greater than 100 lumens/watt with round shaped surface mounted LED down lighter PMMA diffuser,powder coated white finish housing making connections to ceiling rose to fitting with 3 core, 1 sqmm copper conductor complete all as specified by Engineer-in-charge. Make Havells/ Philips/Crompton

S&F mirror light 14W out put lumens greater than 100 lumens/watt, CRI=>60, CCT=>5500, Internal surge protection up to 2KW , Power Factor 2 feet making connection toceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engr-in-charge. Make Crompton / Havells/Philips

Supply and fix Bulk head fitting out put lumens greater than 100 lumens/watt oval shape edge-lit LED 10W luminaire comprising of high brightness LEDs making connections to ceiling rose to fitting with 3 core, 1 sqmm copper conductor complete all as specified and directed by Engr-in-charge. Make; Havells /Jaquar/Crompton.

Palace constructions

RS ENTERPRISES

GMS Builders