Annual Rate contract for Providing and fixing of Sign Boards, Cat Eye, delineators etc. on various roads of Subzone B area of T.P. 41, 61, 62, 69 in South East Zone (Limbayat).

SCHEDULE-B S.O.R. 2024-25

Item Per without

Item Description Qty. Amount (Rs.)

No (unit) GST & with

1 Cat Eye/Road Stud/RPM:-Supplying of Molded Shank Raised

Pavement Markers made of polycarbonate and ABS moulded body

and reflective panels with micro prismatic lens (No Glass Bead lens)

capable of providing total internal reflection of the light entering the

lens face and shall support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope to 8000 Nos. 217.40

the base shall be 35 +/- 5 degree. The strength of detachment of the

integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm

and height not less than 30+/- 2 mm) from the body is to be a

minimum value of 500 Kgf. Fixing will be by drilling holes on the

road for the shanks to go inside, without nails and using epoxy resin

based adhesive as per manufacturer’s recommendation and

complete as directed by the engineer. (3M or Equivalent Brand)

2 Solar Stud: Supplying of Solar Raised Pavement Markers made of

polycarbonate molded body with circular shape, solar powered, LED

self illumination in active mode, 360 degree illumination and

reflective panels with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face in passive mode.

The marker shall support a load of 20000 kg tested in accordance to

ASTM D 4280. The marker should be resistant to dust and water

ingress according to IP 65 standards and should withstand

temperatures in the range of 0 C to 70 C. Color of lighting could be

provided in red or yellow (amber) as per requirement and typical 50 Nos. 2088.68

frequency of blinking is 1 Hz. There should be current losses of less

than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance

the life of the marker and a full charge should provide for a

minimum autonomy of 50 hours. The height, width and length of the

marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the

surface diameter of the marker shall not be less than 100 mm

respectively. The weight of the marker shall not exceed

Kilograms. Fixing will be by drilling holes on the road for the shanks

3 to go inside,

Providing without nails

Supplying and using

& Fixing jumboepoxy

traffic adhesive as

out of 1.5 mm thick CRC sheet in conical shape having 188cms,

bottom dia 30cms, top dia 22cms, with top circular direction plate of

30cms dia for arrow fabricated as per attached drawing and coated

with black epoxy powder coating and Retro reflectorised three yellow 30 Nos. 3575.00

strip 15cms wide and arrow Micro Prismatic grade sheeting as per

ASTM 4956-09 Type-XI Fixing with cement concrete M-25 grade,

Foundation size 30cm*30cm*35cm as per the instruction of

Engineer in charge.

4 Providing Supplying and fixing post delineators made of ABS body

fitted with high reflective, reflectors and mounted on pipe of 50 to

mm dia and height varying from 450 to 700 mm to be installed etc. 200 No. 1333.20

completed as per direction of Engineer-in- charge.(3M or Equivalent

5 Flexible Median Marker:- Providing and Fixing of Flexible Median

Marker that are made of tough, high impact resistant, injection-

molded, thermoplastic body with property of flexibility to provide

high durability.The dimention of flexible median marker should not

exceed 18.4cm in height (including shank height), 12.5cm in

width,0.65cm in thikness and shank depth shall be 3.4cm.the body

structure shall be rounded at all it's corners and edges.the plastic

used for molding the flexible median marker should survive impact

load 5kg continuosly for 750 times at room temperature.The logo of

the manufacturer shall be embossed on either side of the body in

the injection molding process. The median marker shall have flame

like shaped body with,fluorescent yellow colour retro-reflective

sheeting of size not less than 90cm square,with fully reflective micro

prismatic cube corners as it's retro-reflective elements as per IRC-

67 2012 and ASTM D4956-09 type XI specifications reflective

values. The retro-reflective sheeting shall be one or both sides of

the flexible medain marker and shall be edge protected with no

exposed edges which will prevent edge lifting,vandalism,sheeting

damage, etc. The flexible median marker shall be fixed by a

Item Per without

Item Description Qty. Amount (Rs.)

No (unit) GST & with

6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced concrete 50 CM 4146.15

work in : (A) Foundation, footing, Base of columns and Mass

7 Regulatory / Mandatory Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 60 cms. Dia Circle as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with 70 Nos. 3540.12

bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor.

8 Cautionary Warning Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D- 4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with 80 Nos. 3906.19

bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (B)

Facility Type-4 Retro Sign

Informatory Reflective sheeting

:-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 80 x 60 cms. rectangular as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (B)

STOP Type-4 Retro Reflective

:-Providing sheeting.

and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size

cms. Octagonal as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective

Item Per without

Item Description Qty. Amount (Rs.)

No (unit) GST & with

11 PARKING SIGNS: Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size size 60 x 60cms. sequare plus 60 x 20cms rectangular

additional plate as as per the design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

Givelab for Sign

Way the product offered

:-Providing andshall besign

fixing submitted

boardsby contractor.

aluminium sheet / 4mm ACP (Aluminum composite Panel); size

x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (B)

Direction Type-4 Retro Reflective

(Junction) sheeting

Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 244x122 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50x50x5mm; 20 Nos. 21287.51

painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be

14 submitted by

Distance contractor. /(B)

Informatory Class-B Type-4

Destination SignRetro Reflective

:-Providing and fixing

sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 180x120 cms. rectangular as per

design of IRC-67- 2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50 x 50 x 5mm; 25 Nos. 18073.46

painted with bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction

of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab

15 for the product

Providing offered

and fixing shall

retro be submitted

reflective by contractor.

sheeting (B)M.O.S.T./

as per latest Class-B

MoRTH Specifications as directed by the engineer.(3M or 50 Sq mt. 3593.58

Equivalent Brand)

Item Per without

Item Description Qty. Amount (Rs.)

No (unit) GST & with

16 Providing and Fixing of powder coating red matt finished MS pipe

bollards made from 100mm O.D & 7.5mm thick M.S pipe having

length of 1050mm, 3mm deep, 25mm wide groove covered by

25mm wide white retro reflective strips hollow section shall be filled

with cement concrete foundation inclusive of excavation,fixing,

refilling of excavated material, grouting with cement concrete and 25 NO. 1610.00

anchar bar/ anchar fastner (hilti or equivalent), removal of debris etc

as shown in drawing and directed by Engineer in charge. (Sample

must be approved.)

17 Signage Pole (Safety Bollard) for Junctions (M.S.Cylindrical pipe

of approved brands) of Size, 8 inch Dia, height-8feet. Wall thickness

of pipe 3mm with base plate of 12mm M.S. base plate, round shape,

cut 4 holes on surface. M.s cleats welded with base plate & pole

surface of 90 deg. includes 4 nos. Bolts to fasten the pole & ground,

with chemical filling. work includees rectro reflective vinyl, Red/Blue

& White High density, High grade 3M or equivalent-Diamond grade 25 Nos. 10170.00

Displaying: BRTS Letters with Arrow & Bus logo on the middle Blue

background with read & white band type display on top & bottom as

per the approved design. shall be installed over flexible or rigid

pavemen. As per instructions of engineer in charge.

18 (A) Information Board:- Retro reflective (Type-11) with ECF

over lay supported on Aluminum composite panel fixed on MS SHS

25mm x 25mm x 2.5mm (3mm Both Side) and supported on MS 20 Nos. 5942.00

Angel 75mm x 75mm x 6mm etc completed as instructed by

engineer incharge

(B) Only Retro reflective (Type-11) with ECF over lay supported

on Aluminum composite panel fixed on (3mm Both Side) Existing

Support etc completed as instructed by engineer incharge 20 Nos. 5832.20

19 Hazard Marker Sign :-Providing and fixing sign boards made out of

2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite Panel);

size 90x30 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

20 Supplying and fixing the necessary blinkers, delineators etc as per

site requirement and as directed by engineer in charge

A Delineators (750mm Height & Wieght 1KG) 60 Nos. 850.00

B Blinkers Taffic Signal Type for Pole mounted 20 Nos. 3850.00

21 Providing and fixing Aluminium Composite Panel of Alum Decor,

Indobond & Flexibond make to all surfaces 4mm thick in required

colours of exterior consisting of two layers of aluminium skins of

0.25mm thick sandwich in a thermo plastic core in continuous

lamination process with PVDF coating of exterior grades ensuring

long life colour and fungal resistance. Base frame work with

aluminium sections shall be fixed over the all surfaces, ACP shall be 10 Sqmt. 1310.98

fixed to the frame work as cladding it includes cost of labour

materials, accessories, adhesive, scaffolding, wastages, transport,

taxes, fixing into a neat finish in aesthetic point of view, without any

undulations in facias all complete as per instructions of the Engineer

Item Per without

Item Description Qty. Amount (Rs.)

No (unit) GST & with

22 Providing and sticking vinyl with eight colour eco solvent and epson

printing. The Vinyl shall be of 100 microns 3M media. The vinyl shall

be laminated by 80 microns film after the printing and before

sticking. The sample of the same shall be approved by the Engineer-

in-charge and shall be stuck in line and level without any crease or

bubbles on the pre laminated board / acrylic sheet using 3M

adhesives surface. The graphics shall be provided. The contractor

shall check the graphic size and the available surface before 20 Sqmt. 754.32

printing. The 3M vinyl signage shall be stuck firmly on 3mm thick SS

304L grade sheet as per designs. The sheet shall be firmly fixed

using SS 20mm dia studs as per the designs. The contractor shall

ensure that the signage sheets are fixed in correct line, level and

plumb. The rates shall be excluding SS sheet but including signage

material including fixing and other related costs like transportation,

electricity etc.

23 Providing, erecting and fixing in position structural steel sections of

Yst 310 grade of TATA, Kamdhenu, Jindal of Asian confirming to

IS:4923 purlins, roof trusses, columns, side runners, ties, bracings,

framing etc, including all types of base plate, gusset plate, cap plate,

bearing plate, stiffner, cleats etc. complete and structural steel

confirming to IS:226 including necessary pipes, rolled joists,

channels, angles, tees, MS flats, angle cleats, gusset plate, bright

bars, chequered plates, cross plates as per required thickness

including cutting, welding, riveting as per structural details and good

engineering practice grinding and cleaning the members as 20 KG. 90.47

specified by Engineer in charge. (only finished measurements shall

be paid for billing purpose). No extra payment shall be made for

grouting that has to be done under the base plate to get full bearing

on supporting sub strata. The paint shall be oil paint in three coats to

get an even look over a coat of red lead paint as per the instruction

of the engineer-in-charge. The rate shall also be inclusive of screws,

bolts, nuts, washers, hinges, pivots etc.

24 Providing and fixing retro Reflective Hi Intensity Micro prismatic

Grade Board using 2mm Aluminum / 4mm ACP, angle iron 75 x

x 6mm. Descaling and degreasing the board as per requirement

using epoxy reflactive process by screen painting as directed etc.

complete including transporting and fixing in C.C. 1:2:4 with

necessary excavation curing etc. complete as per I.R.C. 67-2012 25 Sqmt. 7535.31

design. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-4(MDR/ODR) retro

reflective sheeting

Executive Engineer

South East Zone (Limbayat)

Surat Municipal Corporation