Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.8 L+₹42,136.40 (9.53%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹4.9 L+₹45,981.35 (10.4%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹4.9 L+₹49,983.86 (11.3%)Rejected-AOC | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | MAVILAKANDY SHAJEE L4 | RAGHAVAN L3 | Marjan V K L1 | jithin mp L2 |
|---|---|---|---|---|---|---|---|
| 1.00Chala Subcenter | |||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 3.99 | cum | 330.7 ₹1,320.15 | 328.02 ₹1,309.46 | 500 ₹1,996 | 325.6 ₹1,299.8 Lowest |
| 1.00 | 4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded
stone aggregate 40 mm nominal size derived from natural sources) | 1 | cum | 7,689.83 ₹7,689.83 | 7,627.37 ₹7,627.37 | 7,000 ₹7,000 Lowest | 7,575.7 ₹7,575.7 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,234.9 | kg | 171.96 ₹2,12,354.26 | 170.56 ₹2,10,625.4 | 150 ₹1,85,235.75 Lowest | 169.34 ₹2,09,118.81 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 98.59 | sqm | 151.56 ₹14,941.85 | 150.33 ₹14,820.58 | 100 ₹9,858.7 Lowest | 149.25 ₹14,714.11 |
| 1.00 | OD302483/2025-2026::Providing and fixing Alu-Zinc profile sheets (size, shape and
pitch of corrugation as approved by Engineer-in-charge) 0.40mm (+0.05%) thickness. Sheet should have protective guard film of
25microns minimum to avoid scratches during transportation and should be supplied in single length up to
12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
of size(5.5x55mm)with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces,
excluding the cost of purlins, rafter sand trusses and including | 158.41 | sqm | 530.41 ₹84,024.9 | 526.1 ₹83,342.13 | 550 ₹87,128.25 | 519.6 ₹82,312.43 Lowest |
| 1.01 | OD302490/2025-2026:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C | 37.2 | metre | 322.11 ₹11,982.49 | 319.5 ₹11,885.4 | 400 ₹14,880 | 317.19 ₹11,799.47 Lowest |
| 1.01 | 50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | 60.8 | metre | 235.26 ₹14,303.81 | 233.35 ₹14,187.68 | 250 ₹15,200 | 231.67 ₹14,085.54 Lowest |
| 1.01 | OD305009/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement
mortar 1:6 for Foundation and basement including all cost of materials, labour charges etc. | 6.13 | cum | 6,398.58 ₹39,236.09 | 6,346.61 ₹38,917.41 | 5,500 ₹33,726 Lowest | 6,301.12 ₹38,638.47 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 29.24 | sqm | 339.93 ₹9,939.55 | 337.17 ₹9,858.85 | 400 ₹11,696 | 334.75 ₹9,788.09 Lowest |
Tender Value
₹5.0 L
EMD Value
₹12,495
Closing Date
5 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Assistant Engineer Chembilodt
The Assistant Engineer LID_EW Section Chembilodt
Annual Plan-Chembilode Grama Panchyatah-Pro No_346/25-26 Additional Work For Chala Thannada Subcenters(retender)
2025_LSGD_818033_3
AE/LIDEW/CHD/TN-4(1)/25-26
Open Tender
Civil Works - Buildings
Item Wise
180 days
Chembilode Grama Panchayat
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,105
Yes
₹12,495
Yes
14 Mar 2026
29 Dec 2025
7 Jan 2026
29 Dec 2025
5 Jan 2026
29 Dec 2025
Amount
Chala Subcenter
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD302483/2025-2026::Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40mm (+0.05%) thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafter sand trusses and including
OD302490/2025-2026:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
OD305009/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for Foundation and basement including all cost of materials, labour charges etc.
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
Thannada Subcenter
9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD316858/2025-2026::Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40mm (+0.05%) thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafter sand trusses and including
OD316953/2025-2026:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
jithin mp (BID ID -2452250)
RAGHAVAN (BID ID -2452741)
MAVILAKANDY SHAJEE (BID ID -2452729)
Bidder Name
RAGHAVAN
MAVILAKANDY SHAJEE
Marjan V K
jithin mp
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1381642.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.26 MB
Tendernotice_3.pdf
PDF • 0.25 MB
Tendernotice_4.pdf
PDF • 0.25 MB
Tendernotice_5.pdf
PDF • 0.25 MB
Tendernotice_6.pdf
PDF • 1.07 MB
viewsbd.pdf
Other Document • 1.84 MB
viewnit.pdf
Tender Documents • 0.03 MB
BOQ_1381642.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .