PROVN OF B VEHICLE WASHING RAMP ALONGWITH WATER SUPPLY

Amount

S&F MS work as in fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting and similar work conforming to Fe-290 Gde- 165, complete all as specified and directed by Engr-in-charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal nut of length of bolt exc10 cm but n.exc. 15 cm long with diameter of neck 11 to 15 mm. incl drilling for making hole to existing and new angle iron post/member complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and also applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping/ hook screws complete all as specified and directed by Engr-in-charge.

Demolition of unreinforced cement concrete of any description and any position complete all as specified and directed by Engr-in-charge.

M&L for PCC1:2:4 type B1 (20 mm graded aggregate) as in columns,pillars, piers,struts, posts etc complete all as specified and directed by Engr-in-charge.

Restraining Resecuring making good staples, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with etc. complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

M & L Cement Concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete

M & L for providing reinforced cement concrete Type B1 in 1:2:4 , using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete Type B1 in 1:2:4 , using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete Type B1 in 1:2:4 , using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per item above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders

M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to roof slab and roof beam rough finished surface of concrete. Complete all as specified and directed.

M & L Pre-cast cement concrete Type block masonry C1 1:3:6 (20mm graded aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6, complete all as specified and all as directed by the Engr-in-charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of block work or concrete surface incl mixing of water proofing compound finished even & smooth with using extra cement. (Note: WPC shall be measured & paid seperately)

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying two coats of cement pase paint over a coat of primer complete all as specified and directed.

Supply only liquid water proofing compound.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L hardcore of broken stone of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.

M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for 100 mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified.

M & L for forming construction joints 10 mm wide and 30 mm deep and filled with sealing compound grade A completre all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

S&F rotational moulded polythylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1966 of 2000 litres capacity hoisted and fixed in position including provision of 20 mm/ 15 mm dia medium grade GI Pipe spouts for connecting inlet, over flow and washout pipes all as specified and as directed .

S&F 25 mm bore galvanized tubes med grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F 20 mm bore galvanized tubes med grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F stop valves cast iron alloy, screwed down high pressure with half threaded handle screwed both ends for iron pipe or union for 25 mm dia GI pipe.

S&F gate valve with iron wheel head, screwed both ends for iron pipe and fixed 25mm dia complete all as specified and complete

S&F Float valve 25 mm dia complete all as specified and directed.

S&F Car Washing MachineTriple Piston Pump Set 50Hz 415 Volts With 3HP 3 Phase supply Including Connection complete all as specified and directed Make- CG,Kirloskar or equivalent.

S&F DOL Starter 415 Volts For 3HP Motor 3 Phase supply Including Connection complete all as specified and directed Make-L&T,C&S or equivalent.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size16 sqmm 4 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge. Make :Havells/L&T/Finolex

M & L in repair HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection 40mm outer dia :- Make:-Infra/Supreme/Prince

M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed. Note : - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately.

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. Make :Legrand Lexic / Hager /Schneider Elect . (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)

S & F in repair MCB Triple Pole and Neutral, 415 volts, 100 Ampere, rupturing capacity complete all as specified and directed. Make polycab havells or equivlant make

Santhi Enterprises

Ridhi Constructions

S Y Itkar Construction and Company