Building Work

Construction of Applied Mechanics Laboratory at Govt. Polytechnic Navsari at Matwad,Dist:-

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 163.35 Cumt 120.01

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 163.35 Cumt 166.35

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(B) Dense or Hard soil

3 Providing and laying controlled cement concrete 31.98 Cumt 3927.44

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings,Base of columns

and Mass concrete

4 Providing and laying controlled cement concrete 86.63 Cumt 4305.49

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns

and Mass concrete

5 Providing and laying controlled cement concrete 30.86 Cumt 9547.56

M.250 exposed work with curing etc. complete

including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (A) BEAMS :(i)

Having cross-sectional area 0.08 to 0.12 Sq.M

6 Providing and laying controlled cement concrete 13.50 Cumt 12638.94

M.250 exposed work with curing etc. complete

including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (B) COLUMNS:(i)

Having cross-sectional area 0.08 to 0.12 Sq.M

7 Providing and laying controlled cement concrete 14.59 Cumt 7977.67

M.250 and exposed work with curing etc. complete

including the cost of formwork but excluding the cost

of reinforsement for R.C.Cwork in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

8 Providing and laying controlled cement concrete 7.89 Cumt 4545.07

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (C) Slabs,landing,shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor two level.

9 Filling in foundation and plinth with murrum or 205.39 Cumt 296.29

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

10 Filling in foundation and plinth with brick Bats 71.09 Cumt 615.57

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete.

11 Brick work using common burnt clay building bricks 105.59 Cumt 4121.55

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

Item Description of Item Quantity Unit Rate In Amount

12 Providing TMT Bar FE 500D einforcement for R.C.C. 22810.26 Kg 77.29

work including bending, binding and placing in

position complete upto floor two level

13 Providing 20 mm thick double coat mala cement 291.14 Sqmt 279.29

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc.

14 Finishing wall with weather proof exterior emulsion 291.14 Sqmt 117.40

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

15 Providing 15mm thick cement plaster in single coat 360.95 Sqmt 176.09

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

16 Applying two coats of putty & two coats of primer of 360.95 sqmt 40.59

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

17 Wall painting (two coats) with plastic emulsion paint 360.95 sqmt 81.05

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

18 Providing and fixing rolling shutters of approved 12.75 Sqmt 3554.40

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M.S.Grill

19 Providing and fixing M.S. grills of required pattern to 1581.25 Kg 105.18

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or

round bars with round headed bolts and nuts or by

screws (A) Plain Grill.

20 Providing and laying polished Kota stone slab 103.70 Sqmt 1079.41

flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

laid over and jointed with grey cement slurry

including rubbing and polishing etc. complete. (B)

Item Description of Item Quantity Unit Rate In Amount

21 Providing and fixing window having extruded 63.25 Sqmt 1591.87

aluminum Colour Powder Coated section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt, horizontal Four track (One Track for

Moisquto Net)member size 92mm x 31.75mm x

1.30mm @ Wt.1.07 Kg/mt, vertical member of size

92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with

sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures andtransparent silicon

sealant glass fixing to frame as per details etc

22 Providing and fixing 18 mm thick Granite on 55.51 Sqmt 1594.79

Window Sill/Jambs in Sandwich Pattern including

20 mm thick cement plaster CM (1:4) and fixing with

cement slurry & adhesive as directed by engineering

in charge etc. complete.

23 Finishing wall with Rustic Regular Surface Texture 291.14 Sqmt 656.50

Plaster. Made from quality pigments and resins,

Rustic Regular Surface Texture Plaster is durable,

water & weather resistant. Rustic Regular Surface

Texture Plaster is free from harmful chemicals,

VOC,including scaffalding for all heights and free foul

smell..etc complete For all floor

24 Providing and laying water proofing treatment by 118.13 Sqmt 914.27

conventional method including cleaning the slab

surface by wire brush as directed including provding

first layer of C.M. 1:4 of 40 mm thickness mixed with

water proofing compound at rate prescribed by

manufacturer, including putting of brick bats of

average thickness 40 mm Well immerssed in water

laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on

fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4

mixed with water proofing compound as directed,

including finishing smooth with cement slurry as

directed complete.

25 Providing, laying and jointing in true line and level 30.00 Rmt 834.38

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm diametre

x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

Item Description of Item Quantity Unit Rate In Amount

26 Point wiring for Light / Bell with 2-1.5 sq.mm & 16.00 Pt. 582.77

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III [1-2-1] Add 1% labour cess

27 Point wiring for FAN with 2-1.5 sq.mm & earth wire 15.00 Pt. 809.01

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III [1-

2-2] Add 1% labour cess

28 Point wiring for on board Looped Plug with 6A 5.00 Pt. 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III [1-2-4] Add 1% labour cess

29 Providing following type of Modular Type 1.00 Ea. 180.79

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. Cat.III (9)

16 Amp. SP one way switch

30 Providing following type of Modular Type 1.00 Ea. 199.98

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (10)

6/16Amp. Universal socket, Cat.III

31 Providing and erecting Mains with 1.1 kV grade FRLS 87.00 Mtr. 104.03

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm [1-4-1] Add 1%

Item Description of Item Quantity Unit Rate In Amount

32 providing and erecting Mains with 1.1 kV grade FRLS 105.00 Mtr. 140.39

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm.

33 providing and erecting Mains with 1.1 kV grade FRLS 45.00 Mtr. 226.24

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

(g) 4 wire 4 sq. mm.

34 providing and erecting Mains with 1.1 kV grade FRLS 14.00 Mtr. 326.23

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

(h) 4 wire 6 sq. mm [1-4-2] Add 1% labour cess

35 Providing and erecting Mains with ISI marked, 1.5kV 30.00 Mtr. 70.70

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (e) One wire 6.00 sq. mm

36 Providing and erecting Mains with ISI marked, 1.5kV 2.00 Mtr. 115.14

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required.

(f) One wire 10.00 sq. mm [1-4-4] Add 1% labour

37 Providing & erecting Switch board for Computer or 1.00 Ea. 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base

frame covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Cat. III [1-6-2-B] Add 1% labour cess

Item Description of Item Quantity Unit Rate In Amount

38 Supplying and erecting LED indoor fittings with LEDs 17.00 Ea. 535.30

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy>

lumens /watt, LED (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver

LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (v) 36-

40 Watts, Surge-2 kV, IP-20, conventional 4 feet

39 Cat.III [2-15-1]

Providing and Add 1% labour

erecting cess make Four pole

Approved 1.00 Ea. 8861.74

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply 50 Hz. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III [3-4-2] Add 1%

40 Supplying and erecting triple pole & neutral 440V / 0.30 Rmt 1961.42

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity [3-8-

2] Add 1% labour cess

41 Providing and erecting Miniature circuit breaker 12.00 Ea. 123.22

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III [3-10-1-B] Add 1%

42 Providing & erecting 240 V MCB double pole switch 6.00 Ea. 329.26

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (A) 6 to 32 Amp.

43 Providing & erecting 240 V MCB double pole switch 9.00 Ea. 362.59

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity

(B) 40 Amp. Cat.III [3-10-2] Add 1% labour cess

44 Providing & erecting 415 V MCB Four Pole for Motor 3.00 Ea. 736.29

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (a) 6 to 32 Amp. Cat.III

Item Description of Item Quantity Unit Rate In Amount

45 Providing & erecting 415 V MCB Four Pole for Motor 10.00 Ea. 736.29

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity

(b)40 Amp. Cat.III [3-10-5] Add 1% labour cess

46 Sheets steel powder coated enclosure suitable for 6.00 Ea. 176.75

incorporating One/Two nos. MCB. [3-11-4] Add 1%

47 Providing and erecting Sheet Steel powder coated 3.00 Ea. 355.52

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and

horizontal single phase outgoing (a) single door (IP-

48 (B) three phase incoming and single phase horizontal 1.00 Ea. 2339.16

type outgoing Per phase isolation type (PPI) (b)

sheet steel double door (i)4 way [3-11-5] Add 1%

49 providing and erecting Approved make RCCBs 3.00 Ea. 2458.34

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed (ii) 40Amps. DP Cat.

III [3-12-1] Add 1% labour cess

50 Providing and erecting Annealed bare Copper wire 2.00 Kg. 794.87

4.064mm to 1.626mm. [3-14-4] Add 1% labour cess]

51 Supplying & erecting earth pit of minimum bore 1.00 Ea. 5760.03

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (b)For Electrical installation up to

11 kV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg. [3-14-9] Add

Item Description of Item Quantity Unit Rate In Amount

52 Providing & erecting weather proof, dust & vermin 1.00 Smt. 10468.65

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder

coating (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel

shall be supplied with following approved

manufacturers with following size. (A) locally

fabricated panel board (i) with 350 mm depth [3-16-

53 Providing and erecting FRLS-XLPE (IS:7098) (I) -88 90.00 Mtr. 341.38

ISI armoured cable multistrand Aluminium

conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (C) 3 1/2 core 50 Sq. mm (

25 Sq.1/2 mm core) [4-3-3] Add 1% labour cess

54 Making trench in soft soil of suitable width of 90 cm 80.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground. [4-5-1] Add 1% labour cess

55 Providing & laying approved make Double walled 45.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable (A)50 mm outer dia

[4-5-8] Add 1% labour cess

56 Providing and, fixing heavy duty flange type brass 2.00 Ea. 75.75

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size

of cables. (B) 3 & 1/2 core 35/50 Sq. mm. [4-6-3]

Add 1% labour cess

57 Solder less crimping type Aluminium lugs 8.00 Ea. 20.20

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected

to switchgear terminals with brass/ cadmium plated

nut bolts in an approved manner. (D) 35/50 Sq.mm.

[4-7-1] Add 1% labour cess

Item Description of Item Quantity Unit Rate In Amount

58 Providing and erecting Approved make Ceiling fan 12.00 Ea. 1596.81

with double ball bearing ISI mark with condenser

A.C. 230V.50 Hz.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge] [5-1-

1] Add 1% labour cess

59 Supplying and erecting 19 / 20 mm. nominal bore 12.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing. [5-2-1] Add 1% labour

60 Supplying & erecting fan hook box of 10 mm M.S. 12.00 Ea. 108.07

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing. [5-2-3]

Add 1% labour cess

61 Supplying and erecting approved make suitable 3.00 Ea. 43.43

panel indicator LED type lamp, lens cover, complete

erected with necessary connections. [9-2-9] Add 1%

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt.

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari