Construction of Aahhar Kitchen near Aahhar Kendra Ward No.03

Earth work Excavation in hard soil in F&P within initial lead and lift including rough dressing and leveling the ground etc. complete.

Filling in F & P with sand watered and rammd to flooring not exceding 0.15m in depth Including cost,conveyance,labour

Supplying all materials, labour T&P and providing Cement Concrete (1:4:8) using 4cm size CBHG metal etc. complete.

Fly Ash Brick masonary in C.M.(1:6) in 25cmx12cmx8cm brick having crushing strength not less than 75kg/cm2 with dimensional toillerence of 8 percent in CM (1:6) in foundation and plinth etc. complete.

Rigid,smooth centering and shuttering for R.C.C.work including false work and removal of same after casting including all cost etc complete. A) Column Base

B) Lintel

C) Coloumn

D) Plinth

Supply, Fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification Unit - 1 MT

Fly Ash Brick masonary in C.M.(1:6) in superstructure using 25cmx12cmx8cm brick having crushing strength not less than 75kg/cm2 with dimensional toillerence of 8 percent in CM (1:6) in foundation and plinth etc. complete.

Fixing of 0.30 mm thick G.C.I. Profile Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fittings but including cost of sheet.

Supply fitting and fixing of GI pipe including all cost and convayance etc.

Providing and fixing vertified tiles of size 600mmX600mm coloured or printed series (homogeneous) in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge.

16 mm thick C.P with C.M ( 1 : 6 ) over brick masonary with cost, conveyance and curing etc.

12 mm thick C.P with C.M ( 1 : 6 )over brick masonary with cost, conveyance and curing etc.

Supply fitting and fixing of Ms Door and Window with all cost and convayance etc all.

priming walls with water based cement primer on new work one coat to give an even shade including cost of primer.

Wall painting 2 coats with weather coat of approved shade on new work to give an even shade including cost of weather coat etc complete.

Priming one coat with any approved primer including cost of primer for Steel work.

Painting two coat with any approved paint including cost of paint.

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).

Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. Labour charges for lowering of -200mm dia ASTMD-1785/89 sch-80 PVC Pipe

Cost of 200mm dia ASTMD 1785/89 sch-80 PVC Pipe (including OHC & CF)

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge