CPP-MLBC-Maintenance of cross regulators near ch14/000 km and 14/700 km and head regulators

Amount

Dismantling Existing shutters and its all accessories

od38099/2020_2021/MH : Dismantling the canal shutter(up to 2 tonne weight)/Hoisting unit/Embedded parts etc of the same and stacking at a distance 100 meter including hire of machinery,labour etc complete as directed by the departmental officer at site (Weight of unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoist units as 80%

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

Supply of MS material for primary &Secondary emedded parts

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

Fabrication and erection of Embedded parts.

od38105/2020_2021/MH : Fabrication and erection of Embedded parts for Canal shutters(Up to 2 tonne weight) and accessories as per approved specifications, drawings and directions of departmental officer at site including cost of labour , machinery , all leads and lifts ,incidental and handling charges etc complete but excluding cost of material already supplied.

Supply and fabrication of shutters ,hoisting girders and accessories..

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od38143/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

od38144/2020_2021/MH : Cost of MS Bolt& Nuts

od38186/2020_2021/MH : ALIGNMENT for CANAL SHUTTER HOSTING MECHANISM as per the directions of departmental officer at site excluding material, hire charges and conveyance but includes labor charges etc complete.

Painting of shutters.

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Fabrication of screw rod, with EN-8 shaft & Reconditioning of existing Screwrods.

od38151/2020_2021/MH : Providing EN-8 Screw Rod 7.50 Tonne Capacity 4.00 Mtr lift Screw Rod having one number of EN-8 Screw Shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material, labour, hire charges and conveyance. (63mm Dia Screw rod )..

od38152/2020_2021/MH : Providing EN-8 screw rod wih one number of EN-8 Screw shaft ,hand operation including cost of all malerials, lubour, hire charges and conveyance. (50mm Dia)..

od38188/2020_2021/MH : Re-Conditioning of existing EN-8 Screw rod including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.

Supply of new worm &pinion, Base &Nut.

od38150/2020_2021/MH : Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance..

od38153/2020_2021/MH : Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc complete..

od38299/2020_2021/MH : Applying Grease on Screw rod and base nut Mechanism for smooth operation.

Painting of Hoisting bridge and its accessories.

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Erection and trial run for the Canal Shutters, Hoisting assembly , Screw rod

od38101/2020_2021/MH : Erection of the canal shutter (up to 2 Tonne weight)/Hoisting bridge/platform including hand rails,ladder etc for the same including alignment correcting and setting complete including cost of all labour,machinery,incidental and conveyance, lead and lift charges etc complete but excluding cost of materials already supplied

ROLF ENGINEERING CO.

Bidder Name

ROLF ENGINEERING CO.

P.Damodaran, G.R.Industries