NABARD RIDF XXII (2016-17) Infrastructure works for Additional hospital building in Taluk hospital Vythiri, Wayanad - SITC of Fire Fighting system.

Amount

Fire protection System

od82431/2020_2021 : MAIN FIRE PUMP:- Supply Installation, testing and commissioning of Fire fighting Main pump electrical motor driven type rated for 2280 LPM at 50m head high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a squirrel cage induction motor SPDP including supply of all accessories with supply condiion 415V,50Hz, 3 phase floor mounted type rated for 40HP and 2900 RPM including supply of all accessories such as coupling, vibration damping arrangements, coupling guard base frame foundation bolt etc.

od82433/2020_2021 : DIESEL ENGINE DRIVEN PUMP:- Supply Installation, testing and commissioning of Main Diesel Engine driven pump of centrifugal end suction type suitable for automatic operation rated for 2280 LPM at 60m head at 38HP high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a diesel engine water cooled with radiator, Complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required at 1800 RPM including supply of all accessories such as common base plate suitable foundation for engine and pump, vibration damping arrangements, Battery, coolant, lubricating oil, exhaust piping, necessary controls such as pressure switch and interconnecting cable from control panel to Battery etc.

od82435/2020_2021 : Supply,installation,testing and commissioning of Horizontal mounted end suction type electric motor driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller,including all accessories operating on Three phase 50Hz,415V AC supply including foundation,bolts etc.complete. The pump set shall be of 3.73KW / 5 HP

od82437/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 25mm Dia

od82439/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 32mm Dia

od82441/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 40mm Dia

od82443/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 50mm Dia

od82445/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 65mm Dia

od82447/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 80mm Dia

od82449/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 100mm Dia

od82405/2020_2021 : FIRE BRIGADE INLET : Supply, installation, testing and commissioning of 4 way Fire Brigade Inlet connection of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arrangement to be connected to wet riser main.

od82407/2020_2021 : Supply, installation, testing and commissioning of 20mm dia Gun metal Air Release valve

od82409/2020_2021 : Supply and providing pressure gauge in the existing system as required

od82411/2020_2021 : Supply and providing pressure switch wityh IP 32 enclosure protection phosphor bronze bellows as sensing element etc complete

od82469/2020_2021 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 50mm dia

od82451/2020_2021 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 80mm dia

od82453/2020_2021 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 100mm dia

od82471/2020_2021 : Hydrant valve - Supply, installation, testing and commissioning of instances pattern stain less steel single Headed Hydrant valve bearing to IS:5290,63mm oblique type with instantaneous hose coupling adaptor, complete with PVC blank cap single

od82473/2020_2021 : Ball valve-Supply, installation, testing and commissioning of C.I. slim seal type ball valve with required flanges, nuts and bolts gasket etc. complete 25mm dia

od82475/2020_2021 : Non return valve-Supply, installation, testing and commissioning of C.I. slim seal type Non return valve with required flanges, nuts and bolts gasket etc. complete 80mm dia

od82477/2020_2021 : Non return valve-Supply, installation, testing and commissioning of C.I. slim seal type Non return valve with required flanges, nuts and bolts gasket etc. complete 100mm dia

od82479/2020_2021 : Fire Hose :- Supply, installation, testing and commissioning of Re-inforced rubber lined hose conforming to IS: 636, 63mm dia. with ISI mark 15m long and fitted with instantaneous type couplings on both ends, made of Gun metal. (Firex / Newage / CRC / Zenith)

od82481/2020_2021 : HOSE REEL : Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Drum and brackets for fixing the equipment on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe (Make : EVERSAFE/SRI/READE

od82483/2020_2021 : HOSE BOX : Supply, installation, testing and commissioning of weather proof hose cabinet having the size of 750x500x250mm made of 16gauge MS Sheet with PCC supports and full front front glass door and locking arrangements suitable to accommodate 2 nos 15m long hose pipes and 1 No. branch pie. The cabinet shall be painted to scarlet red colour outside and off white inside.

od82485/2020_2021 : BRANCH PIPE : Providing and installation of Branch pipe of 63 mm dia having Gunmetal/Stainless steel body with hexagonal head of 20mm dia nozzle conforming to IS903 with ISI mark

od82493/2020_2021 : Supplying, installing, testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc

od82495/2020_2021 : Supplying, installing, testing and commissioning of microprocessor based main fire alarm control panel of 12 Zones with visual LCD indications for fire/fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hours normal operation and 15 minute alarm operation. The panel shall be fabricated by MS sheet and powder coated both inside and out side door shall be glass fronted type with locking arrangement as per specification.

od82497/2020_2021 : Supply, installation, testing and commissioning of manual call point break glass type as per standard specification.

od82499/2020_2021 : Supply, installation, testing and commissioning of Electric Hooter as required

od82413/2020_2021 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector, Twin core shielded low noise cable.

od82417/2020_2021 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 100W RMS out put in rack, including necessory control wires, jacks etc. complete as required

od82419/2020_2021 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

od82421/2020_2021 : Supply, erection, testing and commissioning of Talk back field device .

od82423/2020_2021 : Supply and providing Fire Escape Route size not less than 16'x16' as required

od82425/2020_2021 : Supply and providing Assembly point boards of 3mm PVC foam board size not less than 16'x16' as required

od82427/2020_2021 : Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required

od82429/2020_2021 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure

od82503/2020_2021 : Supply and installation of ABC type fire extinguisher 5kg capacity consisting of M.S cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc.

od82505/2020_2021 : Supply and installation of DCPtype fire extinguisher 5kg capacity consisting of M.S cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc.

od82507/2020_2021 : Supply, laying and clamping of 2 core 1.5 sq mm PVC insulated and PVC sheathed armoured copper cable, using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.13 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp

90.12.7.17 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 35 sq mm with factory made clamp

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.6 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.6 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.6. mm ( 4 SWG)

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.2 : Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.1.4 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.125 Amp TP & N

2.1.5 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N

90.14.28.2 : S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

90.14.28.8 : S & F Motor starters of the following ratingsFully automatic star delta starter for 30 to 35HP motor

od82511/2020_2021 : Supply & fixing the Flush head actuator - Red with legend "STOP" with 1 NO contact

od82513/2020_2021 : supply and fixing Three phase Digital Volt meter to read: V, accuracy class 1

od82515/2020_2021 : supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

od83073/2020_2021 : Supply and installation of 12V/24V, 10A Battery Charger and giving connection in the existing panel as required.

od82517/2020_2021 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5Sqmm single run

od64179/2021_2022 : Copying charges of Electrical/fire Drawing per A3 sheet additional copies

od64181/2021_2022 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

Allies Fire Systems Pvt Ltd

Bidder Name

Allies Fire Systems Pvt Ltd

RAYAN FIRE PROTECTION SYSTEMS