Special repair to Bldg no T-34, T-35, T-35A and T-37 (OR Md Accn) Sup FAFA and Provn of one store and water point with cooling facility at SP road under GE Dehradun.

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed by Engr-in-Charge.

All as per serial item No. 03 here-in-before, but except brick complete all as specified and as directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment from wall upto brick work or plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as directed by Engr-in-charge.

Material and labour for prepration of old decorated surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed Engr-in-Charge.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper , over 1-1.5 mm thick putty and a coat of primer complete all as specified and directed by Engr-in-Charge.

Material and labour for prepration of old decorated surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer on complete all as specified and directed Engr-in-Charge.

Material and labour for prepration of old decorated surfaces and applying one coat of white wash complete all as specified and as directed Engr-in-Charge.

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour for preparation of wall and applying interior grade wall care putty 1.0 to 1.50 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Taking down wooden chowkhats or frames with shutters n. exc 1.5 Square metre each (without taking off shutter from the frame) complete all as specified and as directed.

All as per serial item No 17.00 here in before but exc. 1.5 Square metre but not exceeding 4 Square metre each complete all as specified and as directed.

Supply and fix Pressed steel frames of size 125mm x 65 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: frame filled in cement concrete1:2:4 type B0 using 12.5 mm graded stone aggregate) complete all as specified and as directed.

Taking down shutter of any description, exc. 1.5 Square metre but n. exc. 4 Square metre each and removing from site complete all as specified and as directed.

Material and labour for 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

Supply and fix 35m thick factory made glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood complete all as specified and as directed by Engr-in-Charge.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cubic metre from ISO certified company. The door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/Cubic metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge.

Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and as directed.

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

Supply and fix powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old window/ventilator and making good of wall surface to match with existing surface complete all as specified and directed : Frame : 44.5 x 44.5 mm x 1.80 mm thick, Middle rail : 44.5 x 44.5 mm x 1.80 mm thick, Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading complete all as specified and as directed.

Supply and fix factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified and as directed.

Supply and fix powder coated aluminium grill with frame fixed to by means stainless steel screws complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Supply and fix Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Square metre in each pane complete all as specified and as directed.

Supply and fix stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and as directed.

Supply and fix stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

Supply and fix stainless steel handles 150 mm long one piece and fixed with screws/welded to frame , complete all as specified and as directed.

Supply and fix 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and as directed.

Material and labour floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and as directed.

Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling of framed or unframed timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.

Dismantling Mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge.

Supply and fix mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O long complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa & zinc coating of grade AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa & zinc coating of grade AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

Material and labour applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and as directed.

Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified and as directed.

Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and as directed.

Material and labour applying two coats of Synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

Material and labour for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor finished complete all as specified and as directed.

Material and labour non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

All as per item No 55 here-in-before but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Material and labour heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 Square metre , in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in plinth protection complete all as specified and as directed.

Material and labour PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and as directed.

Excavation in post holes (or similar holes ) in any type of soil each n exe 0.5 Cubic metre , gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole shaft, wells etc not exc 10 Square metre on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and directed by Engr-in-charge.

Material and labour PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified and as directed.

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge.

Material and labour 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms and like over 15 mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing stone slab complete all as specified and as directed.

Supply and fix granite 16-18mm thick of any type ( table rubbed and polished) as in cooking platform, steps, jambs pillars, window cill, and like over 15 mm thick screed in cement mortar 1:4 incl pointing in white cement including demolition of existing stone complete all as specified and ditected.

Material and labour grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

Supply and fix in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and as directed.

Supply and fix in repair rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and as directed.

Supply and fix 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and as directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 20 mm complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and as directed.

Supply and fix 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fix 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Material and labour cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n exceeding 10 cm girth complete all as specified and as directed.

Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and as directed.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and as directed.

Supply and fix in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and as directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and as directed.

Supply and fix in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and as directed.

Supply and fix in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and as directed.

Supply and fix in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and as directed.

Supply and fix vitreous china, white, oval shape wash hand basin, table top flat size 550 x 400 mm including MS brackets including 12 to 15mm thick prepolished mirror granite fixed on RCC slab 1:2:4 type B1, 50mm thick with steel reinforcementcutting for and pinning in ends of brackets & with 32mm (PTMT) waste coupling (half or full threaded) minimum weight 32gm-45gms) & 15mm bore CP pillar tap alongwith 25mm dia PVC (LDPE) of pressure 6Kg/cm2 down pipe 75cm long complete all as specified and directed.

Supply and fix 32mm waste fitting /coupling,brass, chromium plated for sink,basin, etc with long screwed shanks and fly nut complete all as specified and directed.

Supply and fix in repair 15 mm bore Angle cock, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix 15 mm bore Angle cock/stop valves (2 in 1), cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply and fix in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix 15mm bore pillar tap swan neck, cast copper alloy fancy type chromium plated complete all as specified and directed.

Supply and fix in repair looking mirror of size 600 mm x 450 mm and 5 mm thick mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and as directed.

Supply and fix in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

Supply and fix 20mm dia brass chromium plated tubular Towel Rail 600mm Long,Stainless Steel complete all as specified and as directed.

Material and labour in repair 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and as directed.

Supply and fix CP steel grating 100 mm to 125mm dia round fix on floor/nahani trap with hole/without fixed with cement morter, complete all as specified and as directed.

Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and as directed.

Supply and fix in repair 15 mm dia bore chromium plated concealed stop cock, complete all as specified and as directed.

Supply and fix in repair 20 mm dia bore gun metal gate valve complete all as specified and directed.

Supply and fix 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Material and labour salt glazed stone ware (SGSW) drain pipe of internal dia 150 mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed

Material and labour cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed

Material and labour for cutting into existing manholes for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded complete) smooth finished and reforming benching as required complete (internal dia of pipe 150mm) complete all as specified and as directed.

Material and labour 65-70mm thick Pre-Cast Factory made cover slab made in RCC M-30 in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed.

Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT) complete all as specified and directed.

All as per ser item No 109 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Provn of 100 users septic tanks exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab cover including RCC precast man hole cover all as per HQ CE Bareilly Zone TD Drg complete all as specified and directed. (Drgs are available in Engr-in-Charge office)

Provn of 2.4 m dia X 3.0 m effective depth, soakage wells exc in ordinary soil foundation in PCC 1:3:6 walls of honey combed, RCC cover slab filling with brick bats, complete of size all as per HQ CE Bareilly zone TD Drg. (Drgs are available in Engr-in-Charge office)

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Square metre but n. exc. 2 Square metre each complete all as specified and as directed.

Material and labour 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and as directed.

Material and labour for 25 mm thick sand filling under floors or in foundations including spreading & levelling complete all as specified directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and as directed.

Material and labour for pre-painted red/ yellow colour machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

Material and labour for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/Square metre and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Square metre ) laid on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Square metre over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed by Engr-in-Charge and as per manufacturer's instructions.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

Providing & fixing tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

Material and labour cement concrete 1:2:4 type B0 40mm thick in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

Material and labour for RCC Type B-1, 1:1.5:3 nominal mix (using 20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour RCC Type RCC Type B-1, 1:1.5:3 nominal mix (using 20 mm graded aggregate) as in Columns, pillars, piers, posts and struts, etc. complete all as specified and directed.

Material and labour for RCC Type B-1, 1:1.5:3 nominal mix (using 20 mm graded aggregate) as in Beams, cantilevers, bressummers,roof beams, roof bend ,lintels over 1.5m span complete all as specified and as directed.

Use and waste Formwork to sides of concrete foundations, footings, columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; roof beam, roof bend,lintel and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for applying two coat of exterior weather proof (on putty surface)100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 4 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capable of tracking pressure and paint usage as certified by paint manufacturer and as mentioned in PS for applying exterior weather proof acrylic emulsion , should be able to spray in hard to reach areas and penetration of exterior weather proof acrylic emulsion on the surface to achieve excellent application using limited manpower complete all as specified and directed.

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

Material and labour for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Square metre , in floors,skirting etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling the existing tiles and backing complete all as specified and as directed.

Supply and fixing Steel rolling shutters 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat primer, erected in position as indicated , complete, gear operated type with bevel gear box and crank handle including taking down complete all as specified and directed Engr in charge

Supply and fix for Steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with1100 Volts, grade 1.5 Square metre m. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Square metre m. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light /Exhuast point controlled by one way switch.

One Cieling fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

One Bell point controlled by one bell push

All as per Item No 133 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Square metre m FRLS copper conductor for continuous earthing complete all as specified and as directed.

Material and labour point wiring with 1.5 Square metre m including concealed PVC conduit medium grade including accessories along with continuous earth wire 1.5 Square metre m PVC insulatedfor one light point/Fan point controlled by one ,one way switch incl cutting chases and making good as per existing surface complete all as specified and as directed.

All as per Item No 135 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and as directed.

All as per Item No 135 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated copper conductor and 2.5 Square metre m copper conductor for continuous earthing complete all as specified and as directed.

Supply and fix in repairs for Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and as directed.

Supply and fix Switch piano flush type single pole one way 6 Amp complete all as specified and as directed.

Supply and fix in repairs for Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and as directed.

Supply and fix Socket outlet 3 pin , 5/6 Amps flush type multipurpose 5 pin complete all as specified and as directed.

Supply and fix in repairs for Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 complete all as specified and as directed.

Supply and fix switch socket 2 in 1, 3 pin , 15/16 Amps flush type universal multipurpose complete all as specified and as directed.

Supply and fix in repairs for Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 complete all as specified and as directed.

Supply and fix Switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

Supply and fix ix in repairs for bell push flush type 5 Amps 230 Volts single pole complete all as specified and as directed.

Supply and fix in repairs for Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified

Supply and fix ceiling rose, surfaces bakelite three terminals complete all as specified and as directed.

Supply and fix ix in repairs for Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting complete all as specified and as directed.

Supply and fix Lamp holder with , insulated body, with back plate suitable for batten fittings including 9/10 Watt LED Bulbs.

Supply and fix ix in repairs for calling bell ding dong type AC 230 Volt single pole complete all as specified and as directed.

Supply and fix ix in repairs for step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and as directed.

Supply and fix wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fix in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge.

Supply and fix Energy efficient LED tube light fitting box type with and incl retrofit 1x18W LED with connector etc complete pre-wired all accessories complete all as specified and as directed.

Removing & Refixing as its existing position or new location the ceiling fan carefully including electric connection complete all as specified & directed

Supply and fix Ceiling fans complete with blades ,down rods, and accessories, 230V,1200mm sweep,340 RPM,200CMM,50Watt with suitable size of fixing arrngement to MS channel or Angle iron arms incl taking down old us fans and deposited to E/M store yard as all specified & directed

Supply and fix exhaust fan,steel body AC single phase ,230 V of size 300mm sweep ,1400 RPM,1300CMM,70 watt with , blades, and frame and louvers incl old us fans deposited to E/M store yard as all specified & directed

Supply and fix Water Storage Electric geyser ,cap 25 Ltr,BEE 5star rated complete all as specified and as directed.

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

Supply and fixing in replacement for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100/125 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make and paid separetaly

Supply and fix in repairs MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

Supply and fixing in replacement for Distribution Box MCB Protected Socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP complete all as specified and as directed.

Supply and fix in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed.

Supply and fix in repairs MCB SPN 240 Volt 10 KA 20- 32 Amp 'C' series conforming to IS complete all as specified & directed.

Supply and fix , MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix , MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supply and fix Temper proof LCD display Digital Energy Meter,single phase, 2 Wire,AC, 230V, Cap 10-60A, Push to fixed type Box with marker of qtr nos on EM as directed by Engr-in-charge

Material and labour for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Square metre m (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed

Material and labour for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Square metre m (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Square metre m 2core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge.

Supply and fix , in repair, MCB DB, sheet metal enclosures double door SPN 4 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 100 Amps complete all as specified and directed.

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 150/150 Ltr complete all as specified and as directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Square metre m 3.5 Core.

Material and labour for Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and as directed.

Supply and fix 'Light' grade galvanised tubing with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

SRI GANESH ENTERPRISES

M/s Teg Singh Negi