CERTAIN REPAIR AND MAINTENANCE BUILDING NO 52 (VB MESS) ALLIED BLDGS UNDER AGE B/R-I AT IMA DEHRADUN

Amount

M&L, for Rendering 12 mm thick on brick or concrete surface with Ready Mix mortar mixed with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete including taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water all as specified and directed. ( Note :- WPC shall be measured and paid separately).

M&L, for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L, for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L, for Rendering 12 mm thick on new brick or concrete surface with Ready Mix mortar mixed with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. ( Note :- WPC shall be paid separately if directed)

M&L, for PCC 1: 3 : 6, type C-1, using 20 mm graded crushed stone aggregates in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L, for PCC 1:4:8, type D-2, (using 40 mm graded crushed stone aggregates) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for 25mm thick plain cement concrete 1:2:4 , type B-0 ( using 10mm graded crussed stone aggregate) as levelling course in sub floors below tile etc complete all as specified and directed.

M/L PCC 1:2:4, type B-1, using 20 mm graded crussed stone aggregate as in coping, benching, for fixing hold fasts etc similar work, using necessary form work complete all as specified

M&L, for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

Formwork to sides and soffits of shelves, lintels & similar work, rough finished flat surface of concrete, all as directed.

Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as directed.

M&L for RCC 1:2:4, type B1, using 20mm graded stone aggregate, as in shelves, beams, lintel etc, all as directed.

M&L, for Rubberised polished precast coloured cement concrete glossy finished Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

M&L for Rubberised polished Glossy finish, chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M&L, for Glazed ceramic coloued tiles size 450mm X 300mm X 5-6mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in colour tile grout including 12 mm thick rendering in ready mix cement mortar, finished the surface rough to receive tiles including dismantling of existing wall tiling including cement mortar bedding ( but not backing) and rubbish off the premises complete all as directed. Make : Somany, Kajaria & Orient

M&L, for Non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L, for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors with tile adhesive, set and jointed and pointed in white or coloured tile grout to match the shade of tiles including 8 to10 mm thick layer of tile adhesive and roughening of existing floor , cleaning etc, complete all as directed.

M&L, for Machine cut kota stone slab flooring 20-25mm thick , in patches not exc. 3 Sqm each patch, laid over 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L, 20 to 25mm thick Dholpur stone slab in flooring or plinth protectin, laid over 20mm thick cement sand screed Cement mortar 1:6 as base, laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of Dholpur stone slab including rubbing and polishing and dismantling of existing stone slabs etc with cement mortar bedding and rubbish off the premises complete all as directed.

M & L 16 to 18mm thick Dholpur stone cladding/vertical surfaces gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, moulding of edges, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete incl demolition of old tiles and screed bed all as specified and directed.

M & L for filling of groove/ joints of marble tiles in existing floors with epoxy grout as per shade of Marble tile, 5 to 6 mm wide and 10mm deep, filled upto 6 mm depth only and kept 4mm empty from top of floor for design including raking out joints, removing old filling material, cleaning the joints and finishing after filling complete all as specified and directed.

M & L for 16 to 18 mm thick Udaipur green marble stone as in flooring, steps and like set in 15mm thick cement mortar 1:6 including pointing in coloured tile grout to match with the shade of marble stone incl rounding off exposed edges of marble stone and demolition of old marble stones and screed bed complete all as specified and directed.

M & L for 16 to 18 mm thick Udaipur green marble stone tile, area of each tile not exceeding 0.36 Sqm, laid in flooring in patches not exc.3 Sqm each patch, set in 15mm thick cement mortar 1:6 including making of grooved joints as per existing pattern & filling the joints with epoxy grout as per shade of Marble tiles including rounding off exposed edges of marble and demolition of old marbles tiles with screed bedding mortar, complete all as specified and directed.

M & L for 16 to 18 mm thick white marble stone slabs in border on floors or in patches not exc 3 sqm each patch, laid in flooring, steps and like, set in 15mm thick cement mortar 1:6 including making of grooved joints as per existing pattern & filling the joints with epoxy grout as per shade of Marble tiles including rounding off exposed edges of marble and demolition of old marbles tiles with screed bedding mortar, complete all as specified and directed.

M & L for 16 to 18 mm thick wonder marble stone laid in flooring in patches not exc.3 Sqm each patch, in flooring or steps and like, laid on 15mm thick screed bed in cement mortar 1:6, including pointing in colour tile grout mixed with admixture of pigment to match the shade of stone incl rounding of exposed edges of marble where required and demolition of old marble/tile including screed bed complete all as specified and directed.

M & L for Granite stone of any colour (of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:4) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. Colour as approved by GE.

Dismantling carefully and taken out cracked or broken marble slabs in floors or in steps area not exc. 0.50 sqm each patch including material & lobour for prepolished marble slab 18-20mm thick of colour (of any type) matching with existing colour of marble slab including 15mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble, including moulding / rounding of exposed edge of slab & removal of debrish from site, complete all as directed.

M&L for cutting and grinding of existing terrazzo floor/ marble floor/ Kota stone floor surfaces ( 3 cut) on horizontal & vertical surface and finally finishing the surfacesto mirror finish uniformally by applying floor polish to entire satisfication of Engr-in-Charge, complete all as directed.

M&L, for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bar including 1.00mm thick MS black sheet frame on edges with two coats of antecorresive paint over primer all complete, as specified and directed.

Taking down existing brick pattern tiles of size 200 x 58mm x15mm as in wall cladding, in patches of area not exc. 1 Sqm each patch and filling the surface with rendering of required thickness in cement mortar 1:4, mixed with WPC as per manufacturers instructions, and to match the existing brick pattern tiles with necessary groove cutting including applying two coat of exterior emulsion paint (Apex paint of Asian/ Weather proof of berger) or equivalent approved make to match the existing shade upto a height of 10 metre complete all as specified and directed by GE. Note : - 1. The rates are deemed to be included all necessary scaffolding and safety measures by the contractor. 2. WPC shall be paid separately if directed.

Providing & fixing non anodised aluminium rectangular hollow sections Alom 2348: size 50.8x 25.4mm x 1.16mm wall thickness for panelling, to be placed at 600mm apart in both vertical and horizontal directions. Extra members at corners/junctions are also to be provided. The frame shall be fabricated & installed in position firmly with the help of suitable aluminium cleats, screws, clamps, rawl plugs all as specified & directed.

9mm thick plywood grade BWR, type BB, fixed with screws to aluminium frame work as in wall panelling.

M&L for 4mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work.

M&L 1st class soft wood rectangular or tringular wrought timber fillets, bullnosed, spalyed, chamfered or rounded on one edge or face not exc. 3 Sqcm fixed with nails.

Supply only liquid water proofing compound complete all as specified & directed.

M & L for Removing /uprooting, shrubs, trees, vegetation growth & weeds from the RCC Chajja, roof slabs and around PVC tanks etc,throughly saturating the affected area with herbicides, making good the damaged / broken portion with cement mortar in cm 1:4 finishing the surface fair and even and cleaning including a coat of bituminious primer and hot bitumen in patches area not exceeding 1.00 Sqm each complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

Taking down shutter of any description n.exc 1 sqm each complete all as specified & directed.

S&F, Ist class hard wood (Teak wood) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F, 35mm thick 1st class H.W. ( Teak wood) plain framed panelled shutters (any number of panels as approved by Engr-in-Charge) with lock rail and panel of 12 mm B.W.P commercial plywood veneered on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

S&F, 35mm thick 1st class H.W. ( Teak wood) glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut aand mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S& F Factory made 24 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window& other frames/ chowkhats of size 50 x 75mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge. Make- Echon/ Rajshree/ Sintex.

M&L for first class hard wood (Teak wood) plain fillets, section exc 3 & n. exc 6 Sq cm, square, rectangular or triangular in section, wrought, secured with nails or brads, fixed in repair complete all as specified & directed.

Supply & fixed in repair, stainless steel sheet 0.80mm thick , grade 304, fixed with stainless screws with washer and welding to SS angles in wall cladding, including taking down existing old damaged wall lining, complete all as specified & directed.

Supply & fixed, in repair, stainless steel Angle 50mm x 50mm x 4mm thick, or any other section, grade 304, fixed with stainless screws and necessary welding at corner of wall & pillars or similar places as a protection to wall / tiles damage from movement of food trolly, including taking down existing old damaged wooden battens/ fillets, complete all as specified & directed.

Supply & fixed , in repair, stainless steel Angle or hollow tube , gde 304, fixed with stainless screws and necessary welding for grill/ gratings of drain, including taking down existing old damaged mild steel drain grill, complete all as specified & directed.

M&L, for Mild steel works as in bands, straps, hold fast, wind ties, angle cleats and similar small articles etc conforming to Fe-290 Gde E-165 complete all as directed.

S&F, Stainless steel butt hinge medium weight 100mm long of approved make (ISI Marked) and best quality fixed with SS screws, complete all as directed

S&F, in repair, 125mm long Stainless steel handle of approved (ISI Marked) and best quality fixed with SS screws as directed.

S&F, in repair, Stainless steel tower bolt 200mm long of approved make (ISI Marked) and best quality fixed with SS screws, complete all as specified and directed.

S&F, in repair, 300mm long stainless steel sliding door bolt with hasp staple (bolt type) and fixing with SS nut bolt or screws (ISI Marked), complete all as specified and directed.

S&F, in repair, Door stopper of stainless steel body and tongue, with hard drawn steel spring and rubber bush, fixed in repair on bottom rail of door, complete all as specified and directed

S&F, Mild steel ordinary rat tail rod pattern springs 200mm length including roller & roller plate fixed in repair complete all as specified & directed.

S&F, in repair, Aluminium alloy body door closer hydraulically regulated designation no 3 universal type, (ISI Marked), suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg complete all as directed.

S&F, Double action door spring hinges 125mm size, mild steel with steel wire spring, stove enamelled, black fixed in repair complete all as specified & directed.

S&F, in repairs, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed

S&F, 4mm thick E-board (classic) tile fixed on Galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing grid of any type, thickness including cover fillets etc complete all as directed

S&F, 4mm thick E-board (classic) tile size 600mmx600mm as in ceiling fixed on existing grid including straightening the grid and taking down carefully old board complete all as specified & directed.

S&F, 10mm thick calcium silicate board tile of size 600mmx 600mm of siliceous and calcareous material reinforced with cellulose fibre for fixing in existing grid including taking down carefully old board complete all as specified & directed.

S&F, 4mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed

S&F, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F, 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F, Chromium plated Urinal spreader for urinals fixed in repair complete all as directed. Make : Cera Cat No. F8070201 or equivalent or equivalent of make Hindware/Essco (Jaquar)

S&F, in repair 15mm dia pillar cock with swan neck spout and aerator, screwed for iron pipe and complete all as directed. Make- Cera cat part No. F2008105, or Jaquar SHFLR5011N New or Hindware Flora code F280012.

Supply & fixed, in repair, 15mm bore long body bib tap chromium plated with wall flange and aerator complete all as specified and directed. Make- Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit.

Supply & fixed, in repair, 15mm bore short body bib tap chromium plated with wall flange and aerator complete all as specified and directed. Make- Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit.

Supply & fixed, in repair, Chromium plated Angle valve 15mm dia (angle cock) cast complete all as directed. Make: Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit.

Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 450mm complete all as directed.

Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as directed.

S&F in repairs, CP Health Faucet with 1 M. long flexible tube chrome braided with wall hook Make- Cera cat part No. F 8030111AB or Jaquar Cat No. ALD 587, Kajaria Kerovit CAT No. KA580020

Supply & fixed in repair, Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete all as directed Make: Cera ( Vivana SeriesF2014211) and equvalent in Jaquar, Hindware, Kerovit

S&F Overhead shower round shape 100mm dia singlei flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. EOS-542N or equivalent of make Cera/Hindware

S&F Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipes & Wall Flange fixed in repair complete all as directed Make: ESSCO (Jaquar) Cat No. ALE-773AL190X125 or equivalent of make Cera/Hindware as approved by GE.

S&F in repair, water closet vitreous china Squatting pan, Orissa pattern, size 580x440mm with integral foot rests, complete all as directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F, in repair, PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe, complete all as directed.

S&F in repair vitreous china EWC star white colour, wall mounted size 54.5x34.5x36 Cm with concealed cistern size 46x45x8 cm with flush plate, seat cover complete all as specified & directed. Make: ENIGMA COMBO of Hindware Cat. No.: 518887 or equivalent of make Cera/ Parryware.

S&F in repair vitreous china EWC “ star white colour”, floor mounted size 72.5 x 38.5 x 76 cm with Cistern with Lid (With Fittings), seat cover complete all as specified & directed. Make: FLORENCE of Hindware Cat. No.:92058 (S-22) or equivalent of make Cera/ Parryware.

S&F in repair vitreous china sensor type Urinal star white colour, Size 37 x 39 x 61 cm including waste coupling complete all as specified & directed. Make: SENSO ARTof Hindware Cat. No.: 60018 or equivalent of make Cera/ Parryware.

S&F in repair vitreous china Urinal “Star white” colour, flat back large Size 37.5 x 39 x 59cm to 61cm including waste coupling complete all as specified & directed. Make:Hindware Cat. No.:60002 or equivalent of make Cera/ Parryware.

S&F in repair vitreous china oval type wash basin star white colour size 56 x 41 cm including waste coupling complete all as specified & directed. Make: Hindware Cat. No.: 10017 or equivalent of make Cera/ Parryware.

Cutting into Granite or marble stone in platform for inserting/ fixing oval type WHB under marble platform including grinding, polishing and taking down and refixing the WHB complete all as directed.

M&L for Vitreous china wash basin, white, flat back, size 550x400mm including GI bracket fixed in repair complete all as directed.

S&F, in repair, Integrated Sensor for Urinals including batteries, complete all as specified & directed. Make: Hindware, Cera, Parryware.

Repair of Integrated Sensor of Urinal to make functionable including replacement of batteries, complete all as specified & directed.

Repair of wall mounted composite flushing cistern by replacing push button & flange etc to make functionable including cleaning of flush, complete all as specified & directed.

Repair of wall mounted composite flushing cistern by replacing internal fittings syphone kit to make functionable including cleaning of flush, complete all as specified & directed.

Supply and fixed in repair, Plain and flexible, PVC waste pipe 32/40 MM dia suitable for wash hand basin/ urinal, of approved make, complete all as direted.

Supply and fixed in repair CP waste coupling 32/40mm dia with fly nuts suitable for wash hand basin/ urinals, all complete as direted.

S&F, 100/ 125mm dia chromium plated grating with/without hole fixed in repair complete all as directed.

S&F in repair plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F, in repairs, Chromium Plated steel stainless steel toilet paper holder fixed in repair complete all as directed. Make: Cera Meridian(SS 304) Cat No. F5015110C4,Jaquar Continental Cat No. ACN 1153S, Kajaria Kerovit Cat No. KA 980009

S&F, in repairs, Chromium plated stainless steel of grade-304 towel rail 600mm size fixed in repair complete all as directed.Make: Cera Meridian (SS 304) Cat No. F5015103C4, Jaquar Continental Cat No. ACN 1111SM, Kajaria Kerovit Cat No. KA 930001

S&F, in repairs, Chromium Plated stainless steel soap dish fixed in repair complete all as directed Make: Cera Meridian ( SS 304) Cat No. F5015160C, Jaquar Continental Cat No. ACN 1131N, Kajaria Kerovit Cat No. KA 930003

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, 10,000 ltr capacity including washing with bleaching powder etc, including taking down carefully and refixing tank lid in position, complete all as directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, 500 ltr to 1000 ltr capacity including washing with bleaching powder etc complete all as directed.

S&F, 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old unserviceable 500 litre capacity water tank & removing to where directed complete all as specified and as directed.

S&F Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. Make: Prayag

S&F 75 mm dia PVC (SWR) pipes pressure rating 6Kg/CM2 single socketed in any length with rubber ring joints laid in floor or trenches including taking down existing pipes complete all as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches including taking down existing pipes complete all as directed.

PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore outlet fixed in repair complete all as directed.

S&F PVC (SWR) branch piece (single) including jointing with solvent cement 75mm bore complete all as directed.

S&F PVC (SWR) bend 75mm bore dia including jointing with solvent cement complete all as directed.

S&F PVC (SWR) bend 110mm bore dia including jointing with solvent cement complete all as directed.

M & L for Preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M & L for Preparation of new plastered surfaces of wall and applying two coats of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger)) complete all as directed

M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint etc complete all as directed.

M & L for preparation of new wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and applying two or more coats of spirit lak dana polishing up to desired finishing as directed by GE

M & L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M & L for French polishing one or more coat on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified & directed.

M & L for Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M & L for Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

M & L for Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

Complete removing of existing treatment from wall / ceilling complete all as specified and directed. (work to be carried upto a height of 10m high)

M & L for Preparation of scrapped or new plastered surface of wall / ceiling and applying 1.5mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. (work to be carried upto a height of 10m).

M & L for Preparation of puttied/ plastered surfaces of wall / ceiling and applying two coats of Oil bound distemper over a coat of primer complete all as specified and directed. .

M & L for Preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on ceiling, complete all as specified and directed

M & L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

M & L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on walls complete all as specified and directed

M & L for Preparation of old coloured concrete tiles, paver block, floor tiles of any description, cleaning with wire brushes, removing all dust & dirt from surfaces, washing with water and applying one one coat of exterior emulsion/ floor paint, complete all as directed.

M & L for Preparation of old painted brick, stone concrete, asbestos cement or plaster surfaces including kerb stone surface of any description over 10 cm width and girth and applying one coat of synthetic enamel paint complete all as directed.

M & L for Preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) or equivalent of approved make on walls complete all as directed.

M/s RK ENTERPRISES (BID ID -3296133)

ADEPT INFRA SOLUTIONS (BID ID -3294304)

Aron Water Proofing and Pest Control (BID ID -3301297)

Amit Traders (BID ID -3296200)

M/S PUNDIR BUILDERS (BID ID -3301145)

KRISHANA ELECTRIC WORKS (BID ID -3300634)

Pragati Enterprises (BID ID -3300738)

Meher enterprises (BID ID -3300680)