C3-3478426/2026

Restaurant Table Leg - Material: Galvanized Iron (GI), matt powder-coated finish, coating thickness 100 microns for enhanced corrosion resistance and surface durability. Base Support Legs: Fabricated from GI sections with a flat profile width of 75 mm and a wall thickness of 1.2 mm. Precision-cut and welded to ensure structural stability and uniform load distribution. Vertical Support Member: 65 mm diameter round GI pipe, 1.2 mm wall thickness, powder-coated to match the base legs. Welded centrally to provide axial stability. Cross Support Member: 35 mm diameter round GI pipe, 1.2 mm wall thickness, welded at 90° to the vertical pipe to act as a lateral brace, minimizing torsional movement. Base Plate: Fabricated from 100 mm (10 cm) width flat GI strip, thickness 6 mm, precision drilled for anchoring to the floor or base platform. Tabletop - Primary Surface Material: 15 mm thick, full-bodied polished vitrified ceramic tile in brick-red finish, selected for high density, uniform color consistency, and abrasion resistance. Edge Treatment: Tile edges are doubled in thickness to 30 mm at the perimeter by bonding a secondary strip beneath the outer edges; finished with a half-round profile for ergonomic touch and aesthetic smoothness. Substrate: 12mm BWR plywood base, moisture-resistant, bonded to the underside of the tile using high-strength, flexible tile adhesive to prevent delamination under thermal expansion or load stress. Finish & Protection: All exposed plywood edges sealed with polyurethane coating for moisture ingress protection. Assembly & Joinery - Legs and support members welded using MIG welding for uniform bead quality and minimal distortion. Powder coating applied electrostatically, followed by curing at 180–200 °C for optimum adhesion and surface hardness. Tabletop secured to the leg assembly using concealed countersunk fasteners with rubber gaskets to absorb vibration and prevent tile cracking.Size - 120cms (l) X 70cms(w) X 75cms(h)

Restaurant Table Leg - Material: Galvanized Iron (GI), matt powder-coated finish, coating thickness 100 microns for enhanced corrosion resistance and surface durability. Base Support Legs: Fabricated from GI sections with a flat profile width of 75 mm and a wall thickness of 1.2 mm. Precision-cut and welded to ensure structural stability and uniform load distribution. Vertical Support Member: 65 mm diameter round GI pipe, 1.2 mm wall thickness, powder-coated to match the base legs. Welded centrally to provide axial stability. Cross Support Member: 35 mm diameter round GI pipe, 1.2 mm wall thickness, welded at 90° to the vertical pipe to act as a lateral brace, minimizing torsional movement. Base Plate: Fabricated from 100 mm (10 cm) width flat GI strip, thickness 6 mm, precision drilled for anchoring to the floor or base platform. Tabletop - Primary Surface Material: 15 mm thick, full-bodied polished vitrified ceramic tile in brick-red finish, selected for high density, uniform color consistency, and abrasion resistance. Edge Treatment: Tile edges are doubled in thickness to 30 mm at the perimeter by bonding a secondary strip beneath the outer edges; finished with a half-round profile for ergonomic touch and aesthetic smoothness. Substrate: 12mm BWR plywood base, moisture-resistant, bonded to the underside of the tile using high-strength, flexible tile adhesive to prevent delamination under thermal expansion or load stress. Finish & Protection: All exposed plywood edges sealed with polyurethane coating for moisture ingress protection. Assembly & Joinery - Legs and support members welded using MIG welding for uniform bead quality and minimal distortion. Powder coating applied electrostatically, followed by curing at 180–200 °C for optimum adhesion and surface hardness. Tabletop secured to the leg assembly using concealed countersunk fasteners with rubber gaskets to absorb vibration and prevent tile cracking.Size - 80cms (l) X 80cms(w) X 75cms(h)

Booth Seating Carcass Material - 16 mm thick BSL brand BWP (Boiling Water Proof) grade plywood, conforming to IS:710 standards, engineered to support static load upto 250kg without structural deformation, selected for high dimensional stability, termite resistance, and durability in humid environments, mounted on high impact injection-molded PVC bushes to prevent direct contact with the floor, enhancing air circulation and reducing moisture absorption at the base. Cushioning & Upholstery - 40 density (40 kg/m³) high-resilience PU foam for balanced comfort and shape retention with seat angle as per BIFMA X5.4-2020 specification. Base thickness of 100mm and back thicness of 75mm, tailored to ergonomic seating height and pressure distribution. Upholstery in premium-grade leatherette (PVC-coated synthetic fabric) in brick shade, abrasion-resistant (≥50,000 Martindale rubs), UV-resistant, and color-matched to tile finish. Stitching: Industrial-grade bonded nylon thread (size 20), double-stitched seams at stress points to prevent tearing. Application: Upholstery stretched and stapled over cushioning with hidden staples; corners heat-softened for smooth wrapping.Size - 120cms (l) X 60cms(d) X 90cms(h)

Cafeteria Chair Carcass Material - 12mm thick BWP (Boiling Water Proof) grande plywood, conforming to IS:710 standards, selected for high dimensional stability, termite resistance, and durability in humid environments. Cushioning & Upholstery - 40 density (40 kg/m³) high-resilience PU foam for balanced comfort and shape retention with seat angle as per BIFMA X5.4-2020 specification. Thickness of 50mm, tailored to ergonomic seating height and pressure distribution. Upholstery in premium-grade leatherette (PVC-coated synthetic fabric) in brick shade, abrasion-resistant (≥50,000 Martindale rubs), UV-resistant, and color-matched to tile finish. Stitching: Industrial-grade bonded nylon thread (size 20), double-stitched seams at stress points to prevent tearing. Legs - Galvanized Iron (GI), matt powder-coated finish, coating thickness 100 microns for enhanced corrosion resistance and surface durability.