Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC SHOP NO 5 OPP SHANI MANDIR PROFESSOR COLONY DISTT YAMUNA NAGAR HARYANA 135001 | YAMUNANAGAR | HARYANA | 135001 | L1 | Accepted-AOC ACCEPTED L1 | |
| 2 | L2₹37.4 L+₹2.8 L (8.16%)Rejected-Finance | L2 | Rejected-Finance Being rejected L2 | |
| 3 | L3₹39.9 L+₹5.4 L (15.5%)Rejected-Finance 2076 2077 CHIRIMAR MOHALLA AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Being rejected L3 |
Tender Value
₹45.0 L
EMD Value
₹89,986
Closing Date
31 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ABHINANDAN KUMAR MISHRA EE IDSE
GE (SOUTH) AMBALA CANTT
CA NO GE SOUTH AMB 50 2023 2024 COMPREHENSIVE REPAIR TO MH AND ADJOINING AREA OF AGE BR II (SOUTH) UNDER GE (SOUTH) AMBALA CANTT
2023_MES_621482_1
GE(SOUTH)/AMB-50/2023-2024
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTTNil
₹89,986
Yes
21 Nov 2023
4 Oct 2023
2 Nov 2023
4 Oct 2023
31 Oct 2023
18 Oct 2023
4 Oct 2023 - 17 Oct 2023
Amount
Supply and fixing in repair of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.
Supply and fixing in repair of stop valve 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed. (NOTE: - Weight of stop cock shall not be less than 0.575 Kg)
Supply and fixed in repair of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. (NOTE: - Weight of bib tap shall not be less than 0.575 Kg)
Supply and fixed in repair of vitreous china squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed
Supply and fixing in repair of vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.5 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
Supply and fixing in repair of vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, urinal spreader of PTMT any colour, including providing &fixing plugs bedding urinal against wall in cement mortor 1:2 securing urinal to plug with and including 60 mm long brass screws etc pointing around urinal back in cement, complete all as specified and directed.
Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm fancy type, chromium plated, long neck, pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc, complete all as specified and directed.
Supply and fixing in repair of vitreous china, white coloured, counter top wash hand basin of size 600 mm x 400 mm x 120 mm, oval type, including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.
Supply and fixing in repair of vitreous china, white coloured, counter sunk wash hand basin of size 450 mm x 350 mm x 150 mm, oval type, including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.
Supply and fixing in repair of chromium plated, WHB mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.
Supply and fixing in repair of chromium plated shower roses 125 size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
Supply and fixing in repair of 10 litres PVC valve less, symphonic action typelow level flushing cistern ISI marked, white/coloured , with inlet ball valve, float and handle including flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern and brackets complete all as specified and directed.
Supply and fixed in repair of 15mm, fancy type, chromium plated, long neck pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed.
Supply and fixing in repair of CP Hand shower (Health faucet) including 1.50 meter long flexible tube with wall hook complete all as specified and as directed.
Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of pipes of any description any length etc complete all as specified and as directed.
Supply and fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of pipes of any description any length etc complete all as specified and as directed.
Supply and fixing in repair of 110mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and as directed.
Supply and fixing in repair of 75mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and as directed.
Supply and fixing in repair of PVC (SWR) junction single, (Single T) 110mm bore equal or unequal fitted with access door complete all as specified and directed.
Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing in repair of 100/125mm dia CP grating any type fixed in floor and jointed in CM 1:3 complete all as specified and directed.
Supply and fixing in repair of 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
Supply and fixing in repair of PVC waste pipe 32/40mm dia flexible PVC hose pipe of standard length/size suibable for wash basin, urinal, kitchen sink etc complete all as specified and as directed.
Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls or laid in floors/roofs including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. NOTE: - Tank shall be white and make of tank shall be engraved on the tank.
Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. NOTE: - Tank shall be white and make of tank shall be engraved on the tank.
Taking down existing aluminium door shutter and readjusting, replacing damaged parts like jointing cleats, glazing clips, Neoprene/ EPDM rubber gasket, anodised aluminium snap beading, hinges,screws, locking bolts,door stoppers,handles etc. complete all as specified and directed. NOTE: - Glass pane, wire mesh, hydraulic door closer, floor spring and mortice lock will be measured and paid separately.
Supply and fixing in repair of double action floor spring hydraucally regulated made of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors complete all as specified and directed.
Supply and fixing in repair of aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed
Supply and fixing in repair of rubber Neoprene/ EPDM rubber gasket for aluminium door & windows complete all as specified and directed.
Supply and fixing in repair of sheet glass 3mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed.
Supply and fixing in repair of 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane pane and glazing with oil putty to steel window or with wooden beads to wooden windows, complete all as specified and as directed.
Supply and fixing of 5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties, fixed to aluminium frame or door with glazing clips, etc. including hacking out old glass complete all as specified and as directed.
Supply and fixing in repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.
Supply, fabricate and fixing in repair in position of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) NOTE: - Section No given above are of make Jindal, Contractor may use similar section of other make mentioned in relevent Appx
Supply and fixing of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters with chowkhats, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, 4mm thick figured glass, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) etc complete including taking down of exixting frame with shutter complete all as specified and directed.
Supply and fixing in repair of 12 mm thick toughen glass shutters (openable type), with diamond polished clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instructions complete consistings :- (a) Stainless steel top patch 01 Set. (b) Stainless steel top pivot 01 Set. (c) Stainless steel bottom patch 01 Set. (d) Glass to wall Stainless Steel lock 01 No (e) Stainless steel floor door spring 01 Set. (f) Stainless Steel Handle 300 mm size 2 Nos For Each shutter, complete all as specified and directed.
Supply and fixing in repair of aluminium alloy anodised powder coated (minimum thickness of powder coating 50 micron) door frame and partly glazed shutters with hollow aluminium anodized sections including 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board as specified including aluminium alloy anodized snap type beads, glazed clip, jointing cleats, rubber packing, gasket, mortice lock 6 levers with key in duplicate, 02 Nos disc or D type aluminium handle 150mm long, 2 Nos aluminium alloy anodized tower bolts 200mm size fixed with 3 Nos of aluminium hinges 100mm long to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : - (a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick. (d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick. (e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick. (f) Gauging clip weighing not less than 0.097kg/metre.
Supply and fixing in repair of aluminium partition wall, 60 micron powder coated sections, (minium thickness of powder coating shall be 50 microns) fabricated size of members 100 x 44.4 x 2.0 mm including making provision of opening etc; and all necessary cleats, panel inserts not more than 1.44 sqm and arrangement to receive with and including 5 mm thick sheet glass and 19 mm thick pre-laminated particle board with aluminium beading, glazing cleats and stainless steel screws rubber gaskets, beading etc; complete all as specified and directed.
Supply and fixing in repair of powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work complete all as specified and as directed.
Supply and fixing in repair of 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.complete as specified and directed.
Supply and fixing of 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in, cup board shelves etc including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing in repair of 2nd class hard wood, plain fillet square rectangular or tringular in section clean swan secured with nails or breads sectional area exceeding 13 sqcm but not exceeding 25 sqcm complete all as specified and as directed.
Supply and fixing in repair of hasp and staple 75 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixing screws, complete all as specified and as directed.
Supply and fixing in repair of continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 40 mm complete all as specified and as directed.
Supply and fixing in repair of aluminium pre coated of choice colour designed type 25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed.
Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exceeding 150mm thick, above or below ground level complete all as specified and directed.
Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in levelling course etc complete all as specified and as directed.
Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. NOTE: - The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area complete all as specified and directed.
Material and labour for premium quality, light shade vitrified ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) complete all as specified and directed.
Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) etc complete all as specified and directed.
Material and labour for premium quality coloured glazed ceramic tiles (300x 450mm x 7 to 8mm thick) as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:3 finished rough surface to receive tiles complete all as specified and directed.
Material and labour for 18 to 20 mm thick black granite stone work (table rubbed, polished & moulding), as in steps, jambs, pillars, window cills, gate pillars and like including 10 mm thick rendering in CM (1:3) and jointed with grey cement slurry @ 3 Kg/Sqm, including pointing in white cement (1:2) using marbel dust with white with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding to edges of stone slabs one edge including fastner if required etc complete all as specified and directed.
Material and labour for machine cut kota stone slab 20-25 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
Material and labour for machine cut kota stone slab 18-20 mm thick ( size of each stone in single piece, laid on vertical surfaces of skirting/dado, over and including cement screed bed 15 mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
Supply and fixing of heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed complete all as specified and directed. (NOTE: - Design/pattern shall be as approved by GE before execution of work)
Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, pattern as approved, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed etc complete all as specified and directed.
Material and labour for mirror polishing on existing kota stone / stone work where ever required to give high gloss finish including repair / replacement of broken kota stone complete all as specified and as directed.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. NOTES: -(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.
Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying three coats of white wash on ceiling complete all specified and directed.
Material and labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacturer's instruction complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint with hand roller, over a coat of alkali resistant primer complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.
Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for Brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) complete all as specified and directed. NOTE: - Old bricks obtained from demolition shall be re used. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.
Material and labour for brick work with sub class B bricks of old size, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Supply and fixing of 5 mm thick plain colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Supply and fixing of 5 to 8 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Supply and fixing of false ceiling at all heights of perforated with fleece 595 mm x 595 mm x 0.5 mm TEGULAR EDGE TILES in global white powder quoted with 60-70 micron front coating and including regular 24 mm wide T-section flange colour white having rotary stitching on the main runner with web height 26 mm, exposed grid system including frame work comprises of main runner spaced at 1200 mm max (centre to centre), hangers (GI wire of 4 mm dia) to be fixed by hiliti consisting of HLS sleeve anchor fastencer of thread size 6.5 mm x 25/5 with soffit cleat made of galvinised steel of size 27 mm x 37mm x 25mm x 1.6mm and level clip in dimensions of 85mmx30mm 0.8mm at 600x1200 intervals. The last hanger at the end of each main runner shoud not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stiching) to be interlocked between main runner at 600 mm shall be 'T'shape section with single rotary stitching made of GS sheet and of size 15 mmx32mm and 3000mm long, crosssed runner shall be 'T' shaped with double rotary stiching made of GS sheet and size 15 mmx 32mm x 1200 mm long and perimeter wall angle shall be made from GS sheet and of size 19mm x 19mm and 3000mm long, colour white, centre to form 600 mm x 600 mm modules, cut cross tees longer than 600 mm to be supported independently, 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), complete including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Supply and fixing of PVC false ceiling consisting of 600 mm x 600 mm, 5mm (+ 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x 1" (25 mm x 25 mm, 1 mm thick) in square pattern of grid sizes of 2' x 2' (600 mm x 600 mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. complete as per direction of Engineer - In- Charge, Manufacturer's specification and drawing including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed. NOTE : -Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Material and labour for re-securing/ adjusting existing false ceiling grid any type and making required tightning to remove sag portion/ depression in false ceiling grid including replacement of missing sections / suspenders etc complete all as specified and directed.
Supply and fixing of missing / damaged perforated ceiling boards in existing grid as per existing size required on front face etc complete all as specified and directed.
Supply and fixing of missing / damaged PVC/metal boards in existing grid as per existing size etc complete all as specified and directed.
Supply and fixing of steel tube 50 mm bore, medium grade galvanized, ISI marked, fixed to walls as in additional support of ceiling , etc including cutting & chasing in wall and making good with PCC to old existing surface including taking down existing pipe any dia etc; complete all as specified and directed.
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of old sheets of any descriptions as existing on site complete all as specified and as directed. NOTE: - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965
Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based plain steel sheet, 0.50mm thick, conforming to IS-15961, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of old sheets as existing on site complete all as specified and as directed. NOTE: - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed.
Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed.
Material and labour for complete removal of existing treatment on surfaces of walls, chajjas, fascias etc and effloroscent salts and treating oil and greasy spots washing down with water and applying two coats of cement base paint over a coat of alkaline resistant primer including filling up all cracks with tar plastic (STP) crack filler and also, make good to plastered surface including necessary scaffolding etc complete all as specified and directed.
Material and labour for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.
Material and labour for preparation of old decorative surface of ceilings etc by washing rubbing down etc and applying one coat of oil emulsion paint complete all as specified and directed.
Material and labour for complete removal of existing treatment on surface of walls, chajjas etc effloroscent salts and treating oil and greasy spots washing down with water and applying and applying two coats of exterior emulsion paint over a coat of alkaline resistant primer upto 12 metre height including necessary scaffolding etc complete all as specified and as directed.
Material and labour for one coat of cement base paint on old surfaces of walls , chajja, facis including filling up all cracks with shalimar tar plastic (STP) crack filler and also making good to plastered surface, including necessary scaffolding upto 12 metre or more height complete all as specified.
Material and labour for preparation of old decorative surface of walls, chajjas, balcony, pillars, fascia etc by washing & rubbing down etc and applying one coat of exterior emulsion paint complete all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of white wash on wall etc complete all as specified and as directed.
Material and labour for preparation of old plastered or unplastered surfaces on ceiling by washing rubbing and applying one coat of white wash on ceiling complete all as specified and as directed.
Material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel complete all as specified and directed.
Material and labour for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed.
Material and labour for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint with spray gun complete all as specified and directed
Material and labour for writing letters or figures (Block, Roman, Italic or Indian) on plastered surfaces with using black synthetic enamel paint on back ground and letter & numbers written with white synthetic enamel paint of 100mm hight etc complete all as specified and directed.
Supply and fixing in repair of plastic and rubber corner/ pillar guard with reflective tapes size 100mmx100mm and 1000mm height complete all as specified and directed.
Providing technically qualified person (Engineer) for preparation of PSMB including carrying out of measurement of old Bldgs as per normal Engineer practice falling under the area of AGE B&R-II under GE (South) Ambala Cantt. Also providing necessary documents (e.g stationery items etc.) for preparation of PSMB, entering site measurement of following items in PSMB as per the format kept in Sub Division: - (a) White wash in ceiling surfaces. (b) White wash in wall surfaces. (c) OBD on wall surfaces / dry distemper (d) Interior emulsion (Plastic paint) on wall surfaces. (e) Cement base paint on wall surfaces. (f) Exterior emulsion paint on wall surfaces. (g) Synthetic enamel paint on wooden surfaces. (h) Synthetic enamel paint on steel surfaces. (j) Varnish. (k) Small article paint steel/wooden. This item includes submission of PSMB building wise falling under AOR of AGE B&R-II under GE (South) Ambala duly scrutinized and signed by JE (Civil) and Engineer-in-Charge and Numbered and audited by Audit authorities (LAO/AO GE) NOTES: - 1. The above PSMB shall be prepared by Engineer having minimum qualification diploma in Civil Engineering from approved Technical Institute alongwith minimum work experience of three years. Details of qualification and experience shall be verified and kept on record by Engineer-in-Charge. 2. PSMB shall be submitted by the contractor before submission of 1st RAR of above work complete in all respect duly signed and audited. 3. The contractor shall be paid for Square meter of periodical items worked out in PSMB as per plinth area of particular bldg. 4. Necessary security pass shall be issued by Engineer-in-Charge in favour of Engineer being appointed by the contractor for the purpose on the basis of particular submitted by the contractor in writing alongwith Police Verification with regard to Character and antecedents of the Engineer. 5. Irrespective of above, in few bldg where complete periodical services are not carried out (Only 2 or 3 items are executed) contractor will prepare PSMB for entire bldg covering all items as mentioned above irrespective of item executed by him as per direction of Engineer-in-Charge. 6. In case of repetitive nature of bldgs where work has been executed by the contractor the payment shall be made only for area to be measured at first instant. No repetition of area shall be allowed and taken into consideration for payment purposes.
NOTE:- Amount of credit of Rs. 63,158.50 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22(R) of tender documents in pdf form which will be deducted offline while acceptance of tender.
Parveen Kumar
M/s REEDIT CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .