Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.9 LAccepted-AOC | L1 | Accepted-AOC Being 1st Lowest | |
| 2 | L2₹27.4 L+₹9,192.50 (0.34%)Rejected-Finance VILL BHAJNAI POST RAJPUR KALA TEHSIL ANOLA DISTT BAREILLY UP 243302 | BAREILLY | BAREILLY | UTTAR PRADESH | 243302 | L2 | Rejected-Finance Being 2nd Lowest | |
| 3 | L3₹29.0 L+₹1.7 L (6.09%)Rejected-Finance | L3 | Rejected-Finance Being 3rd Lowest | |
| 4 | L4₹29.6 L+₹2.3 L (8.47%)Rejected-Finance | L4 | Rejected-Finance Being 4th Lowest | |
| 5 | L5₹29.8 L+₹2.5 L (9.09%)Rejected-Finance | L5 | Rejected-Finance Being 5th Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
WELCOME MAINT TO OFFRS MD ACCN IN NEW AND OLD BWL AREA UNDER GE (EAST) BAREILLY.
2022_MES_544408_2
8216/E8
Open Tender
Civil Works
Item Rate
275 days
BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE EAST BAREILLY
₹90,000
Yes
29 Sept 2022
16 Aug 2022
9 Sept 2022
16 Aug 2022
7 Sept 2022
24 Aug 2022
16 Aug 2022 - 17 Aug 2022
Amount
Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
Taking down shutter and refixing with easing in same opening of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed
M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggeregate) finished the surface even and smooth using extra cement as in floor complete all as specified and as directed.
M&L 15-18 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed
M & L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M& L for rendering 15mm thick in cement mortar (1:4), finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)
M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm including mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)
Supply only Integral water proofing Liquid of Dr fixit/sika/Fosroc
M&L PCC 1:5:10 type E-2 as sunken sub base of floor fillings with broken brick aggregate complete all as specified and directed.
S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
S & F in repair 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified as directed
S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers the size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F wire mess shall be measured and paid for separately)
S&F for 18 mm thick termite resistant and water proof, both side prelaminated wooden plywood one side with decorative choice lamination, and other side plain white lamination total thickness not more than 22 mm thick, as in cup board shutters & frame, including piano hinges, wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Thickness of laminated not less than 1mm for inside plain white type & 1.5 mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners
S&F for 12 mm thick termite resistant and water proof , both side laminated wooden plywood one side with decorative choice lamination & other side plain white lamination , total thickness not more than 15 mm, as in cupboard shelves & partitions including fixing to wall, soffits & base of cupboard by powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Thickness of laminated not less than 1mm for inside plain white type & 1.5 mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid
S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complte all as specified.
S&F in repair 40mm dia cupboard Knobs fixed with necessary screws, nuts etc all as specified and directed
S & F in repair 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
S & F in repair 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F in repair 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F in repar 100 mm in size butt hinges medium weight stailess steel colled rolled complete all as specified and directed by Engineer-in-Charge.
S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.
S&F in repair 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
S&F in repair 300 mm long Stainless steel sliding door bolts( without locking arrangements) not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix with as welding complete all as specified and directed
S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
S&F for steel windows/ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Wire cloth shall be measured and paid for separately).
S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).
M&L in repair for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including Hacking out old, broken glass (any thickness, size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all specified and as directed.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in M S window / wooden shutter complete all as specified and directed
S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.
S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.
Disconnecting existing tanks exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hositing if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).
S&F in repair service tank lid / cover of size 0.45 m dia and 0.20 m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity incl necessary nut, bolts washers and locking arrangement complete all as specified and directed.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.
S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all s directed. "Model :of Hindware or equivalent of Parryware, Cera .
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. "Model :of Hindware or equivalent of Parryware, Cera .
S&F in repairs Brass chromium plated wall mixer 2 in 1 , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. Model : Cat No florenite 5273UPR of Jaquar or equivalent of Parryware, Cera or Hindware
S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified."Model No CAN-1153N Jaquar or equivalent in Hindware, Parryware, Cera ".
S & F in repair fancy type 150mm size square brass CP shower rose all as specified. Model No F 7010507 of Cera or equivalent in Hindware, Parryware, Jaquar ".
S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed. Model :Parryware, Cera or equivalent in Hindware.
S&F in repairs 15 mm dia bib tap cast copper alloy with butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all as specified as directed.
S&F in repair fancy type chromium plated brass two way Angle valve suitable for 15mm bore pipe complete all as specified and directed. Model: FUS 29041 Fusion of Jaquar or equivalent in Hindware, Parryware, Cera "
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified. Make Jaguar or equivalent
S & F in repairs ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.Model : ARI -39053 of Jaquar or equivalent in Hindware, Parryware, Cera.
S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed. Make Jaguar or equivalent
S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. Model: ACN - 1171N of Jaquar or equivalent in Hindware, Parryware, Cera ".
S & F matt finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as spd and directed
S&F for stainless steel matt finish Hat peg set of five tier with necessary fitting completed all as specified and directed
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . Model: ACN - 1173 of Jaquar or equivalent in Hindware, Parryware, Cera .
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed.
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Model: cat no 20076of Hindware, or equivalent Parryware, Cera.
S&F in repair vitreous China coloured European type WC with "P" or "S" trap 1st quality including connection to drain and fixing bolts complete all as specified. Make Hindware / parryware or equivalent Model: ACN 20011 (P/S) Jaquar or equivalent in Hindware, Parryware, Cera
S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. Model: Sleek fresh dual flush of Hindware or equivalent of Parryware, Cera or Jaquar"
S & F 15 mm dia CP health faucet with 1.0 Meter Long Flexible pipe and holder complete all as specified and directed Model :ALD 573 of Jaquar or equivalent in Hindware, Parryware, Cera
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) cement complete all as specified and directed
S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) cement complete all as specified and directed
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S & F in repairs of ISI marked waste fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed
S & F in repair 32mm dia PVC waste pipe for sinks/ basin and complete, all as specified.
S&F in repairs Jet spray CP Brass with 1.5m tube completeall as specified and directed.
S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unionand cap and fixed in repair for 32 mm bore
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. (Cat Part No. 551 of Make Prayag or equivalent model)
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.
S & F for 1 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm), incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. Model : Cat No BA 711501- satin finish series Alma of Cera or equivalent of Parryware , Nirali , Pearls .
S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed.
M & L for Post construction anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same as specified and directed.
M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete as specified and directed.
M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.
S&Fin repairs Rubber strip 15mm, 75mm wide and 1200mm long
S&F Hafele Stainless Steel Security Door chain Antique finish 150mm Your security partner for home
S&F Adjustable 200 Degrees Wide Angle Peephole Door Viewer Peep Sight Hole Home Security (Cooper)
S&F in repair floor door stopper brass body and tongue with hard drawn steel spring complete all as specified and directed.
S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as spd as directed
S & F in repairs for plastic seat cover (plastic water closet seat and cover) closed pattern with flat bottom and Mild Steel chromium plated or aluminized hinging device complete. all as specified.
M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper over a coat of putty complete all as specified and directed
M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying Two coat of oil bound distemper over a coat of putty complete all as specified and directed
M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying Two coat of oil bound distemper complete all as specified and directed
M & L for preparation of old plastered surfaces of ceiling including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying Two coat of oil bound distemper complete all as specified and directed
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.
M & L for preparing old plastered surfaces of wall incl removal of existing treatment and applying Two coat of white wash complete at any place /height such as room /stair case /common area etc all as specified and as directed
M & L for preparation of old painted wood or wood based surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M & L for preparation of old painted steel and iron surfaces of any description, not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old painted wood or wood based surface of any description, not otherwise described over 10cm width or girth and applying one coat of thin varnish paint complete all as specified and directed
M & L for preparing new plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and as directed
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M & L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty 1mm thick complete all as specified and as directed
Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.
Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for BER Board or rehanging etc after some minor repair complete all as specified and directed.
Taking dowm submainwiring/service cable including earth wire and removing from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
One 5A flush type switch socket point on same board board
One 5A flush type switch socket point on independent board
All as per Srl item No 130 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through existing concealed 20 mm conduit fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
One 5A flush type switch socket point on same board board
One 5A flush type switch socket point on independent board
One light point controlled by two way switch.
All as per Srl item No 132 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
S&F in replacement of switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.
S&F in repairs switch piano flush type single pole one way 5 Amps complete all as specified and directed.
S&F switch piano flush type single pole two way 5 Amp complete all as specified and directed. Havells/ Anchor.
S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.
S&F in repairs Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.
S&F in repairs Bell push flush type 5 Amp complete all as specified and directed.
S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
S&F in repairs Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.
S&F in repairs socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.
S&F in repairs Bell AC 230 Volt single pole Ding Dong complete all as specified and directed.
S&F Lamp holder (batten/angle) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.
S&F in repairs Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.
S&F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
S&F in repairs ceiling roze, 3 terminals, PVC polycarbonate isolated body complete all as specified and directed.
Fixing only old serviceable light fittings any type including electric connection & cleaning complete.
Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete including cleaning & connecting up with 3 core flexible copper conductor cable of 1.0 sqmm complete all as specified and directed.
S & F in repairs Lamp LED heat sink white with polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 Volts, 7/9 Watt complete all as specified and directed.
S & F in repairs LED Tube light fitting/Batten MS 1x 20 Watt ( T-8 ), 4' long, 230/240 Volts, AC decorative with driver, holder including retrofit LED T-8 polycarbonate Tube light 4' long connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F in repairs LED Tube light fitting/Batten MS 1x 10 Watt ( T-8 ), 2' long, 230/240 Volts, AC decorative with driver, holder including retrofit LED T-8 polycarbonate Tube light 2' long connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F in repairs LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped with holder, clear prismatic diffuser, heat sink integrated including one no. 10Watt SMD LED lamp complete all as specified and directed.
S &F in repairs LED luminaire 2'X2', 35/36 Watt, 220/230 Volts AC, ultra slim edge lit type, recessed type with high efficiency diffuser soft glare free light with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
S &F in repairs LED luminaire round, 9 Watt, 220/230 Volts AC, ultra slim edge lit type, Surface type with high efficiency diffuser soft glare free light with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
S &F in repairs LED luminaire 1'X1', 18 Watt, 220/230 Volts AC, ultra slim edge lit type, recessed type with high efficiency diffuser soft glare free light with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
S &F in repairs LED down light round shap,concealed ,recess type with high efficiency PC housing with PC diffuser soft glare free light complete with compact LED lamp,driver, holder suitable for roof ceiling of 6 Watt, 230/220 Volts complete all as specified and directed.
S &F in repairs LED building security light fitting 25 Watt, 230 / 220Volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant polycarbonate cover complete with driver, lamp & IP 65/66 protection complete all as specified and directed.
S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts on the existing phenolic laminated sheet complete all as specified and directed.
Supply and fixing ceiling fan 1200 mm sweep completeincluding electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm with regulator all as specified and directed
Supply & Fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, Voltage 230 V,50Hz, 1200 RPM, Copper winding of 300 mm sweep including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn in & including PVC conduit/ PVC casing & caping all as directed.
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing conduit all as directed
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn in existing conduit all as directed
S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 20 A, 240 V MCB complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 12 way, 240 V, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS), Vertical Three phase & Neutral (VTPN) when MCBs to be used and including one No. MCCB 125 Amp, 4 pole is used as incommer 4 way, 415V, double door with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs MCB 415V, 10KA, TPN, 100Amp complete all as specified and directed.
S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA 'B' curve type complete all as specified and directed.
Fixing only old serviceable MCBs single phase and neutral 16A-63A, 230V 10KA complete all as specified and directed.
S&F in repairs MCB SP 6A-32A, 230V, 10KA 'B' curve type complete all as specified and directed.
S & F in repairs Cable weather proof flat twin core with aluminium conductor multi stranded of size 6 sqmm, 1100 Volts grade complete all as specified and directed.
S & F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 3 of SSR-I 2009. GI wire protected by GI pipe light grade 15mm dia connected to earth test point including excavation in any type of soil, returning filling, disposal of soil, earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar, 20 mm dia (medium grade) watering pipe and providing layer of charcoal or coke and salt in alternative layers complete as specified or directed & including testng on completion. (NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)
S&F in repair Modular Cover plate with frame 1 Module complete all as specified & directed.
S&F in repair Modular Cover plates with frame 3 Module complete all as specified & directed.
S&F in repair Modular Cover plates with frame 6 Module complete all as specified & directed.
S&F in repair Modular Cover plates with frame 8 Module complete all as specified & directed.
S&F in repair Modular metal flush box 1/2 Module complete all as specified & directed.
S&F in repair Modular metal flush box 3 Module complete all as specified & directed.
S&F in repair Modular metal flush box 6 Module complete all as specified & directed.
S&F in repair Modular metal flush box 8 Module complete all as specified & directed.
S&F in repair Modular switch piano flush type single pole one way 6 Amps complete all as specified & directed.
S&F in repair modular switch piano flush type single pole two way 5 Amp complete all as specified and directed.
S&F in repair Modular Switch Piano flush type single pole one way 16 Amps complete all as specified and directed.
S&F in repair Bell Modular push flush type 5 Amp complete all as specified and directed.
S&F in repair Modular Socket outlet 2 in 1, 3 pin 6 Amp flush type complete all as specified and directed.
S&F in repair Modular socket outlet 2 in 1, 3 pin 5Amp and 16 Amp complete all as specified and directed.
NETRAPAL SINGH
j u enterprises
M/S ABHISHEK ENTERPRISES
M/S Quality Constructions
UTTRAKHAND BUILDERS
M/S YASHCON CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .