Kerala

Active

Works

Civil Works - Buildings

Annual Plan-VATHIKUDY GP 2026-27 - PADAMUKHAM COMMUNITY HALL MAINTENANCE IN VATHIKUDY GP-PPROJECT NO.110/27

Local Self Government Department

Vathikudy G.P | Idukki, Kerala

Amount: ₹3.4 LCloses: 17 Oct 20267d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published9 Oct 2026
Closes17 Oct 2026
Bid Opening22 Oct 2026

Tender Value

₹3.4 L

EMD Value

₹8,453

Closing Date

17 Oct 2026, 6:00 pm7d left

Tender Inviting Organisation

Name

OFFICE OF ASSISSTANT ENGINEER LID AND EW SECTION V

Address

OFFICE OF ASSISTANT ENGINEER LID AND EW SECTION VATHIKUDY

Work Description

Annual Plan-VATHIKUDY GP 2026-27 - PADAMUKHAM COMMUNITY HALL MAINTENANCE IN VATHIKUDY GP-PPROJECT NO.110/27

Tender Information

Tender ID

2026_LSGD_877260_27

Reference Number

01/AE/TND/LID/EW/VTY/26/27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

Vathikudy G.P

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredE-PAYMENT (.pdf)

RequiredINTEGRITY PACT (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredSBD (.pdf)

Fee & Financial Details

Tender Fee Amount

₹750

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹8,453

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

9 Oct 2026

Published

9 Oct 2026

Bid Opening

22 Oct 2026

Download Starts

9 Oct 2026

Download Ends

17 Oct 2026

Submission Starts

9 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (28 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Toilet Maintenance
1.001	14.82:Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge	4	no	-	-
1.002	OD211122/2026-2027:ENGAGING MAN MAZDOOR	3	Day	-	-
1.003	OD211123/2026-2027:ENGAGING FITTER	2	Day	-	-
1.004	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	2.42	cum	-	-
1.005	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	2.82	cum	-	-
1.006	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	4.06	sqm	-	-
1.007	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	7.66	kg	-	-
1.008	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	1.72	sqm	-	-
1.009	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	56.24	kg	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.48 MB

Tendernotice_2.pdf

PDF • 0.03 MB

Work Item Documents

BOQ_1491810.xls

BOQ • 0.32 MB

viewnit.pdf

Tender Documents • 0.03 MB

viewsbd.pdf

Tender Documents • 1.80 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Toilet Maintenance
1.001	14.82:Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge	4	no	-	-
1.002	OD211122/2026-2027:ENGAGING MAN MAZDOOR	3	Day	-	-
1.003	OD211123/2026-2027:ENGAGING FITTER	2	Day	-	-
1.004	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	2.42	cum	-	-
1.005	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	2.82	cum	-	-
1.006	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	4.06	sqm	-	-
1.007	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	7.66	kg	-	-
1.008	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	1.72	sqm	-	-
1.009	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	56.24	kg	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Toilet Maintenance

1.001

14.82:Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge

1.002

OD211122/2026-2027:ENGAGING MAN MAZDOOR

Day

1.003

OD211123/2026-2027:ENGAGING FITTER

Day

1.004

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

2.42

cum

1.005

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

2.82

cum

1.006

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

4.06

sqm

1.007

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

7.66

1.008

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

1.72

sqm

1.009

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

56.24