Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAdmitted-Finance CHENAB VALLEY DIVISION HPPWD UDAIPUR HIMACHAL PRADESH | CHAMBA | HIMACHAL PRADESH | 176207 | L1 | Admitted-Finance | |
| 2 | L2₹2.1 L+₹4,260.27 (2.03%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹2.4 L+₹26,992 (12.9%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | LALIT KUMAR L1 | Chaman L2 | GHANSHYAM RANA L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring, strutting, planking, timbering wherever required, stacking the useable or unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying, jointing, testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming, watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | 5.4 | Cum | 420 ₹2,268 | 300 ₹1,620 Lowest | 400 ₹2,160 |
| 2.00Laying, jointing, testing and Carriage of GMS tubes (Medium Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | ||||||
| 2.01 | 100 mm dia | 20 | Rmt | 90 ₹1,800 | 70 ₹1,400 Lowest | 100 ₹2,000 |
| 3.00Cutting of GI pipes, by welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement according to relevant BIS standards/approved specifications including carriage of material complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | ||||||
| 3.01 | 100 mm | 722.2 | Cm | 2.5 ₹1,805.5 | 1.9 ₹1,372.18 Lowest | 2.5 ₹1,805.5 |
| 3.02 | 50 mm | 189.34 | Cm | 2.5 ₹473.35 | 1.9 ₹359.75 Lowest | 2.5 ₹473.35 |
| 3.03 | 40 mm | 306.46 | Cm | 2.5 ₹766.15 | 1.9 ₹582.27 Lowest | 2.5 ₹766.15 |
| 3.04 | 32 mm | 134.71 | Cm | 2.5 ₹336.78 | 1.9 ₹255.95 Lowest | 2.5 ₹336.78 |
| 3.05 | 25 mm | 214.78 | Cm | 2.5 ₹536.95 | 1.9 ₹408.08 Lowest | 2.5 ₹536.95 |
| 4.00Welding of GI pipes, by butt welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement in minimum three layer to make the joint leak proof according to relevant BIS standards/approved specifications including carriage of material and Die penetration test complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. (This work also includes fabrication of short pieces i.e bends, tees and other specials etc). | ||||||
Tender Value
₹2.7 L
EMD Value
₹5,400
Closing Date
23 Dec 2025, 5:00 pmClosed
Executive Engineer
JSD Baggi
Providing connectivity from newly constructed storage tank 10 Nos. at Dhanukhri, Brouta, Delag Tikkari, Harhali, Ghanyari, , Bunajar , Bagga-I, Bagga- II, Chaloug, Shikari Kothi various location by laying, jointing, testing and carriage of GI pipe
2025_HPIPH_123445_1
22576-625 Dated 12-12-2025
Open Tender
Civil Works
Item Rate
90 days
Baggi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹5,400
2 Mar 2026
12 Dec 2025
24 Dec 2025
13 Dec 2025
23 Dec 2025
13 Dec 2025
13 Dec 2025 - 23 Dec 2025
Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring, strutting, planking, timbering wherever required, stacking the useable or unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying, jointing, testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming, watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
Laying, jointing, testing and Carriage of GMS tubes (Medium Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
100 mm dia
Cutting of GI pipes, by welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement according to relevant BIS standards/approved specifications including carriage of material complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
Welding of GI pipes, by butt welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement in minimum three layer to make the joint leak proof according to relevant BIS standards/approved specifications including carriage of material and Die penetration test complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. (This work also includes fabrication of short pieces i.e bends, tees and other specials etc).
Providing, supplying and fixing of Cast Iron Sluice Valve of following dia of Katar make/ Leader make as per IS 14846/2000 of nominal pressure and designation PN-1.0 with cap complete process of opening of existing valve and fixing new valve including carriage of material complete in all respect with in all leads & lifts as per the entire satisfaction of the Engineer-in-Charge.
100 mm dia
Providing, Supplying and fixing of Gun Metal wheel Valve (Heavy Duty) of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing and Supplying of G.I. Nipple (Heavy duty) (UNIK make) ISI marked as per IS: 1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendment of following diameter mentioned below complete in all respect with in all leads and fits and to the entire satisfaction of the Engineer-in-Charge.
Providing and supplying of G.I. Union (Heavy duty) (UNIK Make) ISI marked as per IS: 1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendment of following diameter mentioned below complete in all respect with in all leads and fits and to the entire satisfaction of the Engineer-in-Charge.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
TC.pdf
Tender Documents • 0.05 MB
BOQ_181303.xls
BOQ • 2.10 MB
FORM6.pdf
Tender Documents • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .