PROVIDING RCC FLOORING WORK IN THE OPEN AREAS OF THE BARRACK ,HOSPITAL & KITCHEN AT MAHILA JAIL ,SABARMATI CENTRAL JAIL , AHMEDABAD.(INCLUDING ELECTRIFICATION WORK) (first attempt)

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

Taking out existing CC interlocking paver blocks from footpath/ central 370.00 SQM 111.65 Rs. One Hundred Eleven &

verge, including removal of rubbish etc., disposal of unserviceable material Paise Sixty Five Only

1 to the dumping ground, for which payment shall be made separately and

stacking of serviceable material within 50 metre lead as per direction of

Engineer-in-Charge.

Excavation for foundation upto 1.5 m depth including sorting out and 740.00 CMT 201.81 Rs. Two Hundred One &

2 stacking of useful materials and disposing off the excavated stuff upto any Paise Eighty One Only

lead.(A) Loose or soft soil (by manual labour)

Providing and laying cement concrete 1:4:8 (1 Cement : 4- coarse sand : 8- 391.00 CMT 2653.67 Rs. Two Thousand Six

handbrokenstone aggregates 40 mm nominal size) and curing complete Hundred Fifty Three &

excluding cost of formwork in (A) Foundation and Plinth

Paise Sixty Seven Only

Providing and Laying Controlled Cement Concrete M-150 and curing 568.00 CMT 4089.94 Rs. Four Thousand Eighty

4 complete. Including the cost of formwork and excluding the cost of Nine & Paise Ninety Four

Reinforcement for Foundation and Plinth for Trimix ROAD

Providing T.M.T. Fe-500D Steel reinforcement for RCC work including 10059.00 KG 75.46 Rs. Seventy Five & Paise

5 cutting, bending, binding and placing in position etc. complete for all floors.. Forty Six Only

Providing and fixing pre-cast concrete kerb stone of gray cement based 258.00 RMT 358.06 Rs. Three Hundred Fifty

concrete block 30cm length, 30 cm height and 15 cm thick of M250 grade Eight & Paise Six Only

6 concret as per approved design and including excavation for fixing inproper

lineandlevel, filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class SN8 62.00 RMT 396.00 Rs. Three Hundred Ninety

Structured Wall polyethelene Piping systems (Pipe with online/offline coupler Six Only

and elastomeric sealing ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-pressure underground

Sewerage & Drainage application as per EN:13476-3 including all local and

central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores etc. complete.

(150 mm ID Dia) Including Lowering, laying and jointing of class SN

structured wall ( External Annular Corrugated & Smooth Internal surface)

Polyethylene Piping and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric sealing rubber

ring placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench, laying on the lower bedding (constructed

at bottom of trenches) at prescribed gradient,depth & alignment ,testing the

water tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed

engineering, including carriage of pipes & fittings from site stacks to the

place of laying etc. as per direction of Engineer-in-charge.

Construction of BRICK MASONRY CHAMBER for under Ground C.I. 17.00 NOS 3793.18 Rs. Three Thousand Seven

inspection chamber and bends with bricks having crushing strength not less Hundred Ninety Three &

than 35 Kg / Cm2 in Cement Mortar (1:5) with RCC top slab with CC (1:2:4)

Paise Eighteen Only

mix ( 1 cement : 2 corse sand : 4 gradded aggregate 20 mm nominal size)

with 8mm. dia. TMT steel at 15 cm. c/c both ways & providing and fixing

precast r.c.c cover size .60 x .45 x .07 mt. with angle frame fixed with C.C

8 (1:2:4) Foundation concrete 1:5:10, inside plaster 15 mm thick with C:M (1:3)

finished smooth with a floating coat of neat cement slurry on walls &

bedconcrete etc, complete. Inside dimension of chamber 455 mm x 610 mm x

450 mm deep for match proposed pipe line. Rate are also inclusive of out

side plaster 15mm. th. in c:m 1:3 from top of the chamber & all side up to

mm. deep below ground level. Including precast cover.

Extra over above item for every additional depth of 0.1mtr. or part thereof 104.00 NOS 239.99 Rs. Two Hundred Thirty

9 beyond 450mm depth for Block masonry chamber 455X 610MM. Nine & Paise Ninety Nine

Brick work using common burnt clay building bricks having crushing 31.00 CMT 3981.21 Rs. Three Thousand Nine

strength not less than 35 Kg/Sq.cm.below plinth level conventional bricksin Hundred Eighty One &

10 cement mortar 1:6(1-cement;6-fine sand) in foundation and plinth.

Paise Twenty One Only

Cutting holes of any required size 100mm/150mm/ 200mm dia. in R.C.C. 6.00 NOS 383.90 Rs. Three Hundred Eighty

floors and roofs or in any RCC member etc. for passing pipe etc. and Three & Paise Ninety Only

repairing the hole after insertion of pipe etc. with cement concrete 1:1:2 (1

cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size),

including finishing complete so as to make it leak proof.

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per 3279.00 RMT 36.80 Rs. Thirty Six & Paise

12 direction of Engineer incharge Eighty Only

Providing & Laying sand & Bitumen filler in joints 10 & 25 mm 3279.00 RMT 11.50 Rs. Eleven & Paise Fifty

Providing,Fabrication and fixing M.S.Grill /GATE of approved pattern 4513.00 KG 74.92 Rs. Seventy Four & Paise

fabricated from M.S. flat,Square Bars, roundbars,C channel, square/round Ninety Two Only

box pipe as per detail drawings.Rate is inclusive of welding with grinding

14 and applying of mild steel putty with hardener into groove to have smooth

surface, two coats of oil paint and one coat of yellow zinc chromate primer

coat as per the Approved Make List of GSPHCL

Providing 15mm thick cement plaster in single coat on brick or concrete wall 223.00 SMT 203.34 Rs. Two Hundred Three &

for interior plastering and finished even and smooth in cement mortar 1:4(1- Paise Thirty Four Only

15 cement;4-sand) including finishing with a floating coat of neat cement slurry

at Ground Floor.

credit value for existing (PAVER BLOCK ) (All dismantled materials in as is 222.00 SMT -188.56 Rs. One Hundred Eighty -41860.32

where its condition weather serviceable or unserviceable shall be Eight Paise Fifty Six Only

16 considered for credit and also taken away by the agency from the site of

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming 500.00 Mtr. 117.00 RS: One Hundred

to IS: 16205 (part 24) 2018)) with minimum load required of 450N capacity Seventeen only

with anti rodent and ultra violet material properties with necessary

connecting accessories of same material at required depth to be laid

17a cms. under ground for laying of cable below ground / road surface for

enclosing cable and back filling the same to make ground as per original.

For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

For Outer dia. 90 mm and Inner dia. 75 mm. (Test Certificate to be 500.00 Mtr. 150.00 RS: One Hundred

Submitted) Fifty only

For Outer dia. 120 mm and Inner dia. 100 mm. (Test Certificate to be 500.00 Mtr. 191.00 RS: One Hundred

17c Submitted) Ninty One only

Providing and erecting Medium Class FIA approved and ISI mark white 50.00 Mtr. 24.00 RS: Twenty Four

colour (embossed) RIGID PVC PIPES of following size complete erected with only

necessary PVC fittings & Junction boxes fixed with adhesive solution.

18a concealed in wall / slab along with continuous fish wire to draw mains, laid

in approved manner. Zari for PVC Pipe & Boxes shall be plastering by

cement mortar & finishing the surface to match the wall / ceiling. For 20 mm

For 25mm dia. 50.00 Mtr. 33.00 RS: Thirty Three

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having 50.00 Mtr. 22.00 RS: Twenty Two

double-locking arrangement with grooves, trunking of size not below 12.5 only

mm in height as per IS with accessories of PVC/Resin polypropylene not

19a below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of

following size . For 20 mm dia.

For 25 mm dia. 50.00 Mtr. 31.00 RS: Thirty One

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore 2.00 Each 6000.00 RS: Six Thousand

of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology only

earthing.Earth electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should

be made from inner pipe for that pipe must be pressed and give rectangular

shape so its work as a terminal.The hot deep galvanising must be done after

above process.Galvanised thickness must be minimum 75 micron any

where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be

provided at terminal. total minimum Weight(approx.) of earth electrodewith

inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

20a content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only]

[OEM has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must

be measured with earth tester. Agency has to bring the earth resistance to at

least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has

to maintain earthing & its value for one year. Earthing must be done in the

presence of A.E. (GSPHCL)]

Providing & Erecting Earthing Chamber and cover:- Earthing chamber 2.00 Each 1025.00 RS: One Thousand

should heavy duty PVC/CC/brick masonary be size of 400 mm X 400 mm X Twenty Five only

400 mm depth and Cover should be heavy duty cast iron with required size of

300 mm X 300 mm X 4 mm thick. Necessary test report must be submitted.

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

For above earthing additional charges for boring in hard rock soil/ semi hard 2.00 Each 325.00 RS: Three Hundred

rock soil (by breaker) & filling soft soil in earth pit (certificate for soil have to Twenty Five only

20c given by DEE / AE along with photographs)

Supplying and erecting Fabricating terminal box for street light pole 5.00 Each 702.00 RS: Seven Hundred

made from 16 SWG M.S. sheet having following size complete with Two only

fixing arrangement for terminal board, with necessary hole for wire

entry and exit from the box. The box shall be provided with cover and

hinges on one side and bolting at other end The box shall be fixed by

clamps fabricated from 25mm x 6mm flat.The box shall be painted

21 with one coat of red oxide and two coats of paint having following box

size 330 mm x 260 mm x 140 mm (depth). Providing and fixing

Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with

Amp. kitkat pattern porcelain fuse unit with suitable brass studs with

nuts, washers and clamps of size 25 mm x 3 mm suitable for pole

painted with one coat of red lead paint.

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv 50.00 Mtr. 58.00 RS: Fifty Eight

grade ISI marked copper wires of following size to be erected as directed. 3 only

22 core 1.5 sq.mm. PVC insulated round copper wire ISI mark.

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm 5.00 Each 487.00 RS: Four Hundred

outside diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and Eighty Seven only

required size and length suitable for 76.5 / 80 mm. required size of pole top or

pipe in pipe surface for terrace as per instruction of EIC or wall bracket as

per instruction of EIC having nuts and bolts for fixing the brackets and

having spread of Upto 0.50 mtr. length with suitable rise as per site condition

23a and suitable welded stiffner reducer and nipple with check nut complete

painted with one coat of yellow zinc and two coats of alluminium paint for

Single arm bracket suitable for pole or terrace as per design given by EIC.

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test

certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) 2.00 Each 616.00 RS: Six Hundred

(Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test Sixteen only

23b certificate to be submitted)

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 5.00 Each 4406.00 RS: Four Thousand

consumption of max. 55 Watts with single piece heavy duty & sufficient size Four Hundred Six only

of die cast aluminium housing to accommodate driver, both SPD and

necessary wiring and terminal easily inside the housing. High power LEDs

wattage of 5 Watt (Driving current of LED should be max. 80% of Rated

current) shall be mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection. LED lense are

covered with thoughened glass / premium cluster Lens for better light

distribution. The fixture should be suitable for pole/bracket mounting. The

fixture should be complied with both LM79 and LM 80 certified. LED module

should be tested L70 at 50,000 hrs ( All Test Certificate must be submitted

24 with RA bill). LED fitting provided with high quality potted driver with Metal

housing and protection against high and low Voltage cut Off, Protection

against 440V. Driver should have protection like over current, over voltage,

short circuit and operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. THD of driver should be less than 10% and

P.F > 0.95. The Fixture should meet the technical criterias like Operating

Voltage range 180 to 270 V, total lumens of fitting not less than 7500, CCT>

4K/6K as per site requirement & decided by EIC, CRI > 65, beam angle

deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs free replacement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 2.00 Each 5229.00 RS: Five Thousand

consumption of max. 75 Watts with single piece heavy duty & sufficient size Two Hundred Twenty Nine

of die cast aluminium housing to accommodate driver, both SPD and

necessary wiring and terminal easily inside the housing. High power LEDs

wattage of 5 Watt (Driving current of LED should be max. 80% of Rated

current ) shall be mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection. LED lense are

covered with thoughened glass / premium cluster Lens for better light

distribution.The fixture should be suitable for pole/bracket mounting. The

fixture should be complied with both LM79 and LM 80 certified.LED module

should be tested L70 at 50,000 hrs ( All Test Certificate must be submitted

25 with RA bill) . LED fitting provided with high quality potted driver with Metal

housing and protection against high and low Voltage cut Off, Protection

against 440V. Driver should have protection like over current, over voltage,

short circuit and operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. THD of driver should be less than 10% and

P.F > 0.95. The Fixture should meet the technical criterias like Oprating

Voltage range 180 to 270 V, total lumens of fitting not less then 11250, CCT>

4K/6K as per site requirement & decided by EIC, CRI > 65, beam angle

deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs free replcement Guarantee for complete Fixture)

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total 2.00 Each 5324.00 RS: Five Thousand

consumption of Max.75 watts with single piece heavy duty & sufficient size Three Hundred Twenty

of die cast aluminium housing to accommodate driver, both SPD and

necessary wiring and terminal easily inside the housing. High power LEDs of

5 Watt (Driving current of LED should be max. 80% of Rated current ) shall be

mounted on high quality metal core based PCB with extremely precised

designed heat sink, complete with IP66 protection. LED lense are covered

with toughened glass / premium cluster Lens for better light distribution.

The fixture should be suitable for pole/bracket mounting. The fixture should

be complied both LM79 and LM 80 certified. LED module should be tested

L70 at 50,000 hrs ( All Test Certificate must be submitted with RA bill). LED

26 fitting provided with high quality potted driver with Metal housing and

protection against high and low Voltage cut Off, Protection against 440V.

Driver should have protection like over current, over voltage, short circuit

and operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. THD of driver should be less than 10% and P.F >

0.95. The Fixture should meet the technical criterias like Operating Voltage

range 180 to 270 V, total lumens of fitting not less then 11250, CCT > 4K/6K

as per site requirement & decided by EIC, CRI > 65, beam angle 120 deg,

surge immunity level at least 4 KV integral and 10 KV non integral. (Note:-

The manufacturer / authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total 2.00 Each 6316.00 RS: Six Thousand

consumption of Max.105 watts with single piece heavy duty & sufficient size Three Hundred Sixteen

of die cast aluminium housing to accommodate driver, both SPD and

necessary wiring and terminal easily inside the housing. High power LEDs of

5 Watt (Driving current of LED should be max. 80% of Rated current ) shall be

mounted on high quality metal core based PCB with extremely precised

designed heat sink, complete with IP66 protection. LED lense are covered

with toughened glass / premium cluster Lens for better light distribution.

The fixture should be suitable for pole/bracket mounting. The fixture should

be complied both LM79 and LM 80 certified. LED module should be tested

L70 at 50,000 hrs( All Test Certificate must be submitted with RA bill). LED

27 fitting provided with high quality potted driver with Metal housing and

protection against high and low Voltage cut Off, Protection against 440V.

Driver should have protection like over current, over voltage, short circuit

and operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. THD of driver should be less than 10% and P.F >

0.95. The Fixture should meet the technical criterias like Operating Voltage

range 180 to 270 V, total lumens of fitting not less then 15750, CCT > 4K/6K

as per site requirement & decided by EIC, CRI > 65, beam angle 120 deg,

surge immunity level at least 4 KV integral and 10 KV non integral. (Note:-

The manufacturer / authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture)

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

Providing and erecting FRLS XLPE(IS:7098)(I)-88 ISI armoured cable 100.00 Mtr. 451.00 RS: Four Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary Fifty One only

28 clamps 1.00 mm thick to be laid 90 cms underground with 1.00 mm thick G.I

heavy duty grade or in existing trench / pipe at road crossing or floor of

following size of cables. For 4 core 4 Sq. mm

Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured 100.00 Mtr. 262.00 RS: Two Hundred

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under ground or Sixty Two only

to be laid on wall with 1.00 m.m thick G.I. heavy guage cable clamp or in

29 existing DWC pipe underground or road crossing or floor. For 3 1/2 core

35 Sq. mm ( 16 Sq.1/2 mm core)

Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured 100.00 Mtr. 227.00 RS: Two Hundred

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under ground or Twenty Seven only

to be laid on wall with 1.00 m.m thick G.I. heavy guage cable clamp or in

30 existing DWC pipe underground or road crossing or floor .For 4 core 25 Sq.

Providing & fixing Double compressed heavy duty flange type brass cable 5.00 Each 43.00 RS: Forty Three

gland with rubber ring for P V C insulated armoured cable complete with only

31a outgoing tails, insulating tape etc. For following size cables. For 2 to 4 core x

4.0 Sq. mm (Sigma, MCI, Comet, HMI Make Only)

For 2 to 4 core 25 Sq. mm (Sigma, MCI, Comet, HMI Make Only) 5.00 Each 61.00 RS: Sixty One

For 3 & 1/2 core 35/50 Sq. mm (Sigma, MCI, Comet, HMI Make Only) 5.00 Each 75.00 RS: Seventy Five

Solderless crimping type Copper lugs conforming to IS suitable for cable of 50.00 Each 8.00 RS: Eight only

following size evenly crimped with high pressure tool & connected to

32 switchgear terminals with brass/cadmium plated nut bolts in an approved

manner.For 1.5/2.5 to 6 Sq.mm Cable

Providing & fixing Solderless crimping type Aluminium lugs conforming to IS 20.00 Each 15.00 RS: Fifteen only

suitable for cable of following size evenly crimped with high pressure tool &

33a connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner. For 16/25 Sq.mm. Aluminium Cable

For 35/50 Sq.mm. Aluminium Cable 20.00 Each 20.00 RS: Twenty only

ITEM Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 50.00 Mtr. 70.00 RS: Seventy only

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

34a (Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

For One wire 6.00 sq. mm

For One wire 10.00 sq. mm 50.00 Mtr. 114.00 RS: One Hundred

For One wire 16.00 sq. mm 50.00 Mtr. 176.00 RS: One Hundred

34c Seventy Six only

TOTAL CIVIL COST

TOTAL ELECTRICAL COST

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.