Construction of new Jetpar sub division office building with Compound wall after dismantling old Quarter at 66 KV Jetpar S/s under Morbi Circle

Name of Work : Construction of new Jetpar sub division office builidng with Compound wall

after dismatling old Quarter at 66 KV Jetpar S/s under Morbi Circle

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

1 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(B) -Dense Or Hard Soil 135.00 121.72 Cmt

2 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(C) -Hard Murrum 180.00 264.44 Cmt

3 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(D) - Soft rock not requiring Blasting 135.00 275.31 Cmt

4 Excavation for foundation up to 1.5 Mt to 3 Mt.

depth. Incl. sorting out and stacking of useful

materials and disposing of the excavated stuff up to

50 meter. Lead in-(C) - Hard Murrum 30.00 284.37 Cmt

5 Excavation for foundation for depth from 1.5 Mt to

3 Mt. depth including sorting out and stacking of

useful materials and disposing of the excavated

stuff upto 50Mt. Lead in-(D) - Soft rock not

requiring Blasting 30.00 298.86 Cmt

6 Filling available excavated earth (excluding rock)

trenches, plinth side of foundation etc. in layer not

exceeding in 20 cm. in depth consolidating each

deposited layer by ramming & watering. 410.00 135.56 Cmt

7 Filling in foundation and plinth with murrum or

selected soil brought from out side with any lead in

layers of 20 cm. Thickness including watering,

pnumatic ramming and consolidating etc. complete. 830.00 298.79 Cmt

8 Providing and laying cement concrete 1:3:6(1

CEMENT: 3-Coarse sand: 6 - Hand broken stone

aggregate 40MM nominal Size) and curing

complete excluding the cost of formwork in.-

Foundations and plinth. 103.00 3064.60 Cmt

9 Providing and laying cement concrete 1:2:4

(1cement : 2 coarse sand : 4 graded stone aggregate

20 mm. Nominal size) and curing complete

excluding cost of form work in : A-Foundation and

Plinth 114.00 3747.27 Cmt

10 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (A) - foundation footings, Base of

Columns and mass concrete 56.00 5401.21 Cmt

11 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (D)- Columns, Pillars Posts and

Struts up to floor two level.-GF 27.00 8777.96 Cmt

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

12 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Beam, Lintel, chhajahs,

Shelvas etc. upto floor two level- GF 89.00 6847.94 Cmt

13 Providing and layingcontrolled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Slab, for upto floor two

level.GF 40.00 7223.22 Cmt

14 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Staircase, for upto floor two

level.GF 2.00 8086.03 Cmt

15 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (D)- Columns, Pillars Posts and

Struts above floor two level.-FF 6.00 8818.93 Cmt

16 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Beam, Lintel, chhajahs,

Shelvas etc. above floor two level.-FF 14.00 6888.91 Cmt

17 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Slab, above floor two level.-

18 Providing TMT Bar FE 500 D reinforcement for

R.C.C. work including bending, binding and

placing in position complete upto floor two level -

19 Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

placing in position complete above floor two level -

20 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (C) Fly Ash

Bricks 82.00 4369.66 Cmt

21 Brickwork using common burnt Fly Ash bricks

having crushing strength not less than

kg./Sq.Cm. in Super Structure up to floor two level.

in Cement Mortar 1:5 (1- Cement : 5 -fine sand)-GF

22 Brickwork using common burnt Fly Ash bricks

having crushing strength not less than

kg./Sq.Cm. in Super Structure above floor two

level. . in Cement Mortar 1:5 (1- Cement : 5 -fine

sand).FF 52.00 4692.26 Cmt

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

23 Half Brick masonary in common burnt Fly Ash

building bricks having crushing strength not less

than 35 Kg. / Sqmt. in cement mortar 1:4 (1-

Cement : 4-Coarse Sand)in Super Structure up to

floor two level 106.00 697.30 Smt.

24 Providing 15 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

walls GF 800.00 178.61 Smt.

25 Providing 15 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering above floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

walls FF 400.00 202.27 Smt.

26 Providing 10 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

Celling GF 250.00 159.93 Smt.

27 Providing 10 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering above floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

Celling FF 75.00 183.59 Smt.

28 20 mm. Thick sand faced cement plaster on walls

up to height 10 meters above ground level

consisting of 12 mm. Thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8 mm. Thick finishing

coat of C.M.. 1:1 (1 cement : 1 sand) etc. complete.

29 Applying general insecticide pest control treatment

to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS

6313 part -II( (0.075% concentration by ss) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S. 350.00 90.72 Smt.

30 Providing Cement vata 10 x10 cm size quarter

round in cement concrete in C.M. 1:1 including

neat cement finishing watering etc. complete. 110.00 24.04 Rmt.

31 Providing and laying Broken China Mosaic

flooring for terrace using 12 mm to 20mm broken

pieces of glazed tiles to be laid over cement mortrar

1:3 to plain or slope and to be tampred to bring

mortar creme out up to surface using white cement

including rounding off junctions and extending

them up to 15cm along the wall, clearing with water

and oxalic acid etc. as directed. 265.00 771.98 Smt.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

32 P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

light shade 295.00 1461.92 Smt.

33 Providing and laying coloured glazed tiles of he

size 300mm x 200mm x 8mm / 300mm x 450mm x

8mm in flooring, skirting, risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-Cement : 3-

Coarse sand) & jointed with white cement slurry etc

as directed by EIC 165.00 1473.50 Smt.

34 Providing and laying Granite stone slab flooring

over 18mm to 20mm average base of cement

mortar 1:6 (1 cement : 6 coarse sand ) or L.M.

1:1.5 (1 lime putty : 1.5 coarse sand )and laid and

jointed with gray cement slurry or fitting in Sill

Jamb laying with bonding chemical or cement as

necessary including rubbing and polishing

complete. (b) Granite stone 18mm thick 1 side

35 Providing and laying polished kotah stone slab

Flooring over 20 mm (Average ) thick bases of

cement mortar 1:6 (1- cement : 6 coarse sand ) or

LM 1:1:5 (1 lime putty : 1.5 coarse sand ) laid

over and jointed with grey cement Slurry mixed

with pigment to match the shade of slab including

rubbing and polishing etc. completed (A) 25mm

36 Providing & laying 20 to 25mm thick, both faces

polished kotah stone with all edges machine cut

up to 600/450mm width and of required length

(only one piece to be used ) of approved quality for

cupboard shelves including fixing the same in

masonry wall by cement mortar in three sides

including curing etc. complete as directed by E.I.C 150.00 953.10 Smt.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

37 Providing , Fixing & Fitting fully glazed, partly

glazed Single/Double leaf anodized /aluminum

powder coted(of approved shade) door using

extruded section fabricated by standard

manufacturers with framing 63.50 x 38.10 having

wt 1.094 Kg pre Rmt rectangular section & door

shutter made from with frame vertical size 44.45 x

47.62mm having wt 1.505 Kg per Rmt and

horizontal size 63.50 x 38.10mm and bottom rail

size 101.60mm 44.45mm having wt 1.60 Kg/M

using 5 mm thick “TRIVENI” or HB4 plain/colour

glass/4 Acrylic Sheets/ 12 mm Board with glazing

deep rubber gasket with locking arrangement of

GODREJ LOCK with all fixtures & fastening of

anodized section with aluminum beeding without

floor mounted door closer etc. completed.. Rates

are with all labours and material as per drawing

and as directed. 11.00 4116.00 Smt.

38 Providing, & fixing hot pressed phenol bonded,

exterior type solid flush door 35mm shutter made

by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick

laminated sheet on both side of door. If necessary

with glass looking window with T.W. batten and

polishing /Colour .Rates are without fixtures &

fastening but with 3 NO. of 100mm. long butt or

parliamentary hinges on each flap of double shutter

& 150mm. long hinges for single shutter and 3 NO.

of M.S. flat hold fast grouted in C.C. (1:2:4) on

each side of frame, 3 coats of oil painting of

approved shades make etc., complete as per

drawing & as directed by E.I.C. 22.00 3675.00 Smt.

39 Providing and fixing FRP frame 100X50 mm and

28 mm thick FRP depressed pannel shutter having

extra reinforcement on sides and edges and in Gel

coat finish.The core of the shutter & frame is to be

filled up with injected fire retardent grade

polyurethane foam done in situ along with

embedded wooden pieces for stiffening and also for

taking hinges and all fixures. The whole FRP

Frame and shutter is to be water proof, weather

proof, termite proof and resistance to mild

acid/alkali.Rates are to be inclusive of S.S. hinges

with necessary screws and allumunium fixtures &

fastening & fastener sleeve. 11.00 2354.22 Smt.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

40 Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm

x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @

Wt. 1.06 Kg/mt with sliding shutters of horizontal

membersize 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ wirh

mosquito net With good quality as directed by EIC

shutter of same size to be fixed in Three track with

5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc Alluminium windows

Three track with Mosquito Net 33.00 3646.00 Smt.

41 Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 kg per

mt with colour Powder Coated alluminium frame

for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation 5.00 1163.92 Smt.

42 Providing & fixing fittings in position Partly panel

and Partly Glazed aluminium (alloy - HE - 9 WP )

frame partition using aluminium 'c' section in the

dimensions of 23.6mmx21.8mm to be used for top,

bottom and side ends aluminium 'H' sections in the

dimensions of 23.6x60mm outer dimensions to be

used for intermediate support, the vertical &

horizontal members to be joined and with concealed

aluminium angle cleat panel to be made from 5 mm

thick HB4 or "Triveni" make plain glass fixed with

glazing clip rubber gasket with aluminium beeding

of required size incl. all fixtures & fastenings

including providing anti glare sun control film as

per drawings & details with rubber on all four side

for air tight fitting with all taxes wastage labour etc

completed as directed by E.I.C. 22.00 2700.00 Smt.

43 Providing & fixing MS plain grills of required

pattern to wooden frames of windows and gap

filling of wall etc. with MS flats or M.S, pipes at

required spacing and frame all- round square or

round bars with round headed bolts and nuts or by

screws with one coat red oxide & two coat of oil

paint (A) plain grill 700.00 113.16 Kg

44 Providing and fixing Stainless Steel text i .e. " નાયબ

િવભાગીય કચેર ,પી વીસીએલ. " in 15" text, and

"PGVCL" logo in size of 26x25 inch with In 9"

PGVCL text in approved steel grade SS 304, latter

with white locor colour , front LG pink Vinyl pest

including all fastners and fixtures at give location as

directed by EIC 42.00 1150.00 Sqft

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

45 Providing and fixing Stainless Steel railing having

50 mm dia of 16 guage hollow stailess steel pipe

hand rail and 32 mm dia. 16 gauge Hollow stainless

steel pipe verticle support with 16 mm dia 16 gauge

SS pipes 2 rows as intermidiate members running

throughout with steel bol as cap at each end

including cutting, bending, welding & fabrication

the structure as per drawing in ASIS 304 grade of

Stainless steel etc. completed as per instruction of

46 Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth. 1525.00 40.19 Smt.

47 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth in wall all floor. 1200.00 83.53 Smt.

48 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth .-in Ceiling all floor 325.00 89.00 Smt.

49 Providing & applying 1 coat of approved make of

primer paint including scaffolding etc., complete as

directed by E.I.C. 1610.00 28.00 Smt.

50 Finishing Wall with Weather Proof Exterior

Emulsion Paint on Wall Surface (Two Coats) to

give an required shape even shade after thoroguhly

brushing the surface to remove all dirt, and remains

of loose powdered materials etc. complete 1610.00 119.07 Smt.

51 Providing and fixing rolling shutters of approved

make made of 80MM wide M.S. laths inter-locked

together thorough their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and

outside locking with push-pull operation with gear

system including the cost of hood cover and spring

etc. complete, of approved guage by EIC. [A]

Shutters having width below 3.5M. 7.00 3519.21 Smt.

52 Supply & fixing to doors & windows, ventilators,

cup boards following fixtures & fastenings of

approved quality with wooden or metal screws, nuts

& bolts as directed or as per the drawing &

specifications. MS CP aldrop 250 mm long band

53 As per above but MS CP Latch aldrop 250mm long

band 12mm dia. 12.00 150.00 Nos.

54 As per above but MS CP Tower bolt 200mm 12.00 50.00 Nos.

55 As per above but MS CP handle 150 mm long 24.00 75.00 Nos.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

56 As per above but MS CP door stay double leg 24.00 40.00 Nos.

57 Providing & Fixing of ISI approved quality

hydraulic door closer as directed. 5.00 925.00 Nos.

58 Providing and Fixing Decorative laminated sheet of

1.25 mm on 6 mm plywood to be fixed on new

wooden laminated partition with necessary frame

from 18mm plywood including cutting, and pasting

without damaging existing wooden laminated

partition with providing and fixing 12 mm glass on

opening to be fixed and cleaning with all labours

and material complete as directed by Engineer in

charge. 34.00 5320.00 Smt.

59 Providing ,erecting and fixing double coated ISI

water tank of required capacity each with all

necessary fittings and connection etc. complete on

terrace 12000.00 3.91 Litre

60 Providing, laying and jointing in true line and level

UPVC Pipe (SCH-40) for cold water including

fittings as approved by Engineer in charge.Pipe

shall be fixed on the wall with the help of clamp at

every two Metre C/C or shall be concealed as

directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with

adhesive solvent incl cost of all materials.15mm

61 As above but 25mm dia. 30.00 90.93 Rmt.

62 As above but 32mm dia. 25.00 117.97 Rmt.

63 As above but 50mm dia 30.00 193.73 Rmt.

64 Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)110 mm 50.00 335.69 Rmt.

65 Providing & Fixing Single Hole Table Top Wash

Basin on 24"X24" Granite Slab with C.I or M.S.

brackete & M. I . fisher union, P.V.C water pipe

with Connection from Stop Cock to Pillar Tap,

PVC Bottle Trap with Connection 32mm dia. C.P.

brassa waste coupling etc. Complete. Rate are

inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Table

Top Wash Basin Shall be as per the Approved

Make List. 4.00 3330.76 Nos.

66 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 15mm.dia.

Valve. 2.00 100.00 Nos.

67 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 25mm.dia.

Valve. 3.00 150.00 Nos.

68 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 32mm.dia.

Valve. 3.00 200.00 Nos.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

69 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 50mm.dia.

Valve. 2.00 250.00 Nos.

70 Providing & Fixing colour porcelain lip shaped wall

type long pattern URINAL PAN of approved

quality & make including waste coupling bends &

necessary outlet of 25mm.dia. G.I Pipe connections

including providing,flush cock, P.V.C. connection

etc., complete Size 550mm x 300mm 4.00 1893.57 Nos.

71 Providing & Fixing EUROPEOUN W.C with PVC

Flush Tank, Soft Seat Cover & intergal "S" Trap

including Jointing the Trap with Pan and Soil pipe.

Wall hung shall be fixed on S.S heavy duty rack

bolt having 16mm dia, 165mm length using Plastic

sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Wall

Hung & Flush Tank Shall be as per Below Make

List & Model Only.

1. Company- Johnson, Model- RUBY EWC

2. Hindware- Model- ACE COMBO/525228 (S-10)

3. CERA, Model- CONVENTIONAL PRO SF

72 Providing and fixing Kitchen sink with C.I. or

M.S.brackets, painted white including cutting holes

in walls and making good the same but excluding

fittings. © Vitreous China Sink.(i) 600mm x

450mm x 150mm size 1.00 2303.62 Nos.

73 Providing & fixing PVC SWR nahni trap IS

for drain -75mm diameterr with Jali of the

following nominal diameter of self cleansinf design

with CI scread down of higed grating including the

cost of cutting and making good the walls. 5.00 568.89 Nos.

74 Providing and fixing S.W Gully trap with C.I

Grating brick masonary chamber and water tight C.I

cover with frame of 300MM x 300MM size (inside)

with standard weight. [I] Square mouth traps. [B]

150MM x 100MM size 'P' or 'R' type. 5.00 1234.57 Nos.

75 Providing & Fixing Health Faucets (ABS Body).

Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed

Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of

Health Faucets Shall be of Hindware, Jaquar,

Kohler, Cera or equivalent. 3.00 565.51 Nos.

76 Providing & Fixing 15mm One way Bib Tap with

Wall Flange. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model &

Make of Bib Tap Shall be of Hindware, Jaquar,

Kohler, Cera or equivalent. 10.00 990.61 Nos.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

77 Providing B.B Masonry inspection chamber

(MANHOLE) of approved size including light type

approved C.I. Cover with frame, necessary

excavation, bottom concreting of B.B CC(1:4:8)

150mm thick/225mm thick B.B Masonry in

C.M(1:6) 12mm thick cement plaster in CM(1:3)

inside & to all exposed faces up to 300mm below

ground level, curing etc. including disposal of

surplus excavated earth up to radius of 500mt.

Including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed

by E.I.C.-300x300mm clear size 5.00 4249.00 Nos.

78 As per above but (c) 600 x 450mm clear size 5.00 5978.00 Nos.

79 Providing & fixing to wall, ceilling, and floor in

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -75mm Dia. 10.00 170.00 Rmt.

80 Providing & fixing to wall, ceilling, and floor in

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope - 90 mm Dia.

81 Providing & fixing to wall, ceilling, and floor in

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -110 mm Dia.

82 Providing & fixing to wall, ceilling, and floor in

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -160 mm Dia.

83 Providing & Fixing 600X450X6mm. thick size

approved best quality of looking glass mirror Modi

or gold fish, mounted on 6mm thick ply with

edging with PVC angle patti as directed with fixture

as required. 4.00 850.90 Nos.

84 P/F brass towel rail complete with C.P. Brass

brackets fixed with C.P. Brass screws.-600 X20

mm size. 4.00 610.32 Nos.

85 Providing and fixing SS plated soap container with

screws etc complete. 4.00 196.00 Nos.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

86 Supplying & Installing Staight grab bar made of

PVC/Nylon material, Length of typically 24-36

inch & Wall mounted type to facilitate easy grip

and leverage for individuals with disabilty including

all men and material as directed by EIC 1.00 1748.00 Nos.

87 Supplying & Installing Disabled cross grab bar

made of PVC/Nylon material, Length of typically

24-36 inch each side & Wall mounted type to

support and balance for individuals with disabilty

including all men and materialas including all men

and materialas directed by EIC 1.00 2300.00 Nos.

88 Supplying & Installing Swing grab bar U shape

made of PVC/Nylon material, Length of typically

36-60 inch & Wall mounted type allows easy

folding against the wall to support and balance for

individuals with disabilty as directed by EIC 1.00 5520.00 Nos.

89 Providing of ACP sheet board with Acp and

Redium textsign board on steel sheet as per design

and etc. complete as directed by E.I.C . 30.00 885.00 Sqft

90 Providing & fixing of wall cupboard shutters using

18MM plywood with Wood Framing size of 25 x

35 mm, decorative laminate of approved shade &

brand on front side and backside with white

laminated sheet. Including finishing with beading

patti and polishing the same. Fixing of door with

hinges, one number of magnet and door handle on

each door and one number of door lock and stopper

for locking arrangement good quality etc. Complete

including materials and labour as direction of

Engineer in charge. 53.00 3824.90 Smt.

91 Steel work welded in built up setions, framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint and two

coats of oil paint:- (A) In beams and joists,

channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters

and the like 1900.00 95.18 Kg

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

92 Providing 2500mm internal diameter & 3.0 Mt.

Deep soak pit including excavation in all types of

soil & soft rock & B.B CC(1:4:8) bedding, 300mm

thick below masonry and 450mm thick B.B

Masonry in CM(1:6) up to 600mm height, 350mm

thick for further 600mm and 230mm thick for

remaining height honey combed, plastering in

CM(1:3) outside up to 1.5 Mt height and 100mm

thick RCC slab with 600x600mm C.I. HEAVY

duty cover with frame, with necessary

reinforcement as per design & C.I Vent pipe

1800mm long with B.B masonry pillar

350x350x450 plastered all around filling with 40 to

50mm size brick bats up to 1.5 Mt depth, including

16mm dia M.S’U’ shape steps, refilling including

disposal of the surplus excavated earth up to the

lead of 500mt. Radius including 3 coats of white or

colour wash to all exposed finished surface etc.

complete as directed by E.I.C. 2.00 52844.87 Nos.

93 Constructing 125 cm thick Controlled cement

concrete M- 250 Grade with Trimix & power

trowling sheet form work with M.S. channels,

srinking of fair hardness, Non oxidzing, Non

metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 0.50 Kg./Sq.M. with

mm x 10 mm size groove cutting in concrete as

constructution joint and 12 mm thick premix

expansion joint at every 20 Meter lengthwith

necessary equipments, labors as per design etc.

Complete. 410.00 709.00 Smt.

94 Providing & Fixing Pre-Cast Rubber Dye

Interlocking concrete Blocks 60mm thick with

grade of concrete M-200 pnumatic compressed by

mechanically pressed and as per approved design

including 75mm sand layer for levelling and filling

the joint with sand in proper linr and level etc.

complete of approved manufacture as per the

direction of Engineer-in-charge 459.00 603.00 Smt.

95 Providing and fixing pre-cast concrete Kerb stone

of grey cement based concrete block 30 cm length,

30cm height and 15cm thick of M-200 grade

concrete as per approved design and including

excavation for fixing in proper line and level, filling

the joint with C.M. 1:3 ( 1-Cement : 3-Sand ) etc

complete as directed by EIC. 96.00 396.90 Rmt.

96 P&F 75mm dia G.I pipe as railing wherever

requried including fixing the necessary hold fasts at

the end/middle and grouting the same inw all with

concrete as directed in line & level and 3 coats of

oil painting of approved shade & make etc. complete

97 P&F M.S conduit pipe gate/grill gate, form

appropriate secton and M.S.flat,square bar, M.S

sheet and grouting the pvot as per drawing and

design with necessary brackets, hold fasts, locking

arrangement on top & aldrop on both the side. 600.00 111.00 Kg

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

98 Providing and fixing G.I. pipe elevation ventilation

zali for open duck as per drawing , section of 3"x1"

for vertical member and 3"x1" horizontal member

at center of 6" c/c. with one coat of primer and two

coat of oil paint etc comp. As per drawing and as

directed by EIC. 17.00 2178.00 Smt.

99 P/F single layer waterproof gypsum board 8mm

thick of the make newgood group co.ltd or

equivalent & newgood group co ltd company

section using waterproof board of size 1220mm x

1830mm x 8.0mm suspended by GI suapender of

size 25mm x 3mm with intermediate channel of size

18mm x 40mm x 0.80mm at 1220mm C/C ceiling

section of size 40mm x 35mm x 0.55mm at 457 mm

center to center and perimetre chanel A of size

20mm x 27mm x 30mm x 0.50mm at edges &

drops including paper tap sand sofit cleat anchor

fastener scoch bolt connecting cleat joining

compound top coat on ceiling including making

necessary opening for light fitting,diffuser

etc..compete as per detail drawing as directed. 20.00 600.94 Smt.

100 Providing Half round moulded round front edge in

trade of steps including rubbing and polishing etc.

Complete 98.00 132.00 Rmt.

101 Providing corrugated G.I. Sheets Class-3 roofing

fixed with Galvanied iron 'J' or 'L' hooks bolts and

nuts 8 mm. diameter with bitumen and G.I.L impet

washers filled with white lead complete excluding

the cost of purlins, raffers and trusses. (I) 0.50 mm.

Thick sheet 100.00 656.00 Smt.

102 Providing and fixing concertina coil fecing with

punched tape concertina coil 600mm dia 10meter

openable length (total 90mt) having 50nos round

per 6 mtr length, upto 3 mtr height of wall existing

angle iron "Y" shaped placed 2.4 mt to 3mt apart

with 9 horizontal R.B.T. reinforced barbed wire

stud tied with GI staples and GI clips retain

horizontal, including necessary bolts or GI barbed

wire tied to angle iron, all complete as per direction

of EIC with reinforced barbed tape (RBT) spring

core (25mm thcik) wire of high tensile strength of

165 (cost of MS angle, CC block shall be paid

separetely). 130.00 282.00 Rmt.

103 Drilling of bore well of 165 mm. dia. by machine in

all kinds of soil, sand, clay, murrum, soft rock and

hard murrum, etc., complete, truly vertical with all

equipments and labours etc., complete as directed

by E.I.C. - up to 150 Rmt. 150.00 264.00 Rmt.

104 Drilling of bore well of 165 mm. dia. by machine in

all kinds of soil, sand, clay, murrum, soft rock and

hard murrum, etc., complete, truly vertical with all

equipments and labours etc., complete as directed

by E.I.C. - above 150 Rmt. 30.00 302.00 Rmt.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

105 Providing, fixing & lowering heavy duty 10KG /

CM2 P.V.C. casing pipe suitable for 165 mm dia

bore well including necessary coupling connector,

solution etc. complete as directed by E.I.C. 20.00 516.00 Rmt.

106 Supplying and lowering 5 H.P. Three Phase.

submersible pump of approved brand with ISI mark

including lowering vertically, fitting with HDPE

pipe and top clamp and connecting cable with

motor and switch board as directed incl. all

necessary accessories and commissioning etc.

completed. 1.00 27773.00 Nos.

107 Providing and fixing best quality of H.D.P.E. pipe

of approved ISS quality with all accessories fittings,

jointing etc., suitable for submercible pump

lowering in bore etc., complete as directed by E.I.C.

40 mm dia. & 10 Kg/ cm2 pipe. 175.00 115.00 Rmt.

108 Providing and fittings of standard swith board with

Ampere and Volt meter ,fuse etc.suitable for three

phase submersible pump with metal/wooden

covered box with locking arrangements and fiiting

on wall as directed. 1.00 4025.00 Nos.

109 Providing and fixing of cable Laxson or equivalent

brand 4 mm three core copper ISI approved make

incl. connecting with submersible motor and with

approved tap to HDPE pipe at 3.0 mt interval etc.

completed.- for Three Phase 200.00 106.00 Rmt.

110 Providing & Fixing top cap for 150mm.dia. pipe

clamps, socket & other accessories required for

completing the job as directed by E.I.C. 200.00 662.00 Nos.

111 Demolition of Brick work and stone masonry

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

lift.(ii) In cement mortar. 261.74 557.32 CMT

112 Demolition of Unreinforced cement concrete

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

lift. 17.00 616.85 CMT

113 Demolition of R.C.C. work including stacking of

serviceable materials and disposal of unserviceable

materials with all lead and lift. 63.04 1071.63 CMT

114 Dismantaling doors, windows, ventilators, etc.

(Wood or steel shutters including chowkhars,

Architraves, Holdfasts and other attachment etc.

complete and stacking them within all lead and

lift.(i) Not exceeding 3-sq.M in area. 104.00 190.19 Each

115 Dismentaling Earth Filling upto 1.5 m depth

including sorting out of useful materials and

disposing off the excavated stuff upto 50 Meter lead

Hard Murrum 45.91 155.77 CMT

Estimated Cost Section-I (CIVIL WORKS) in Rs.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

116 Main Fire Hydrant Pump

LUBI/KSB/KIRLOSHKER make SITC of: Back

pull out type -Single Stage, Self Mriming,

Centrifugal Pump for Main Fire Pump with Electric

Motor, Meachanical Seal, Base frame and

Couplings. MOC:-Casing-CI, Impeller- Bronze,

Shaft- SS 410, Sleeve- SS410. Flow Capacity:

LPM Head: 30 to 35 mtr 2900RPM Pump shall be

capable of furnishing not less than 150% of rated

capacity at a head not less than 65% of rated head

he shut off head shall exceed 120% of rated head.

UOM:-Price Per Complete set of Pump + Motor +

Accessories. 1.00 53480.00 Nos.

117 Supplying & erecting approved control cubical

panel (Star - Delta) made from16 G. CRCA sheet

duly painted with epoxy powder painted inside and

outside with hinged doors and locking arrangement,

consisting of suitable size of ON- OFF isolator (AC

- 3/23 duty) main fuses, single phasing preventer

cum water level. Guard (Complete unit), Toggle

switch to by pass Single phase preventer cum

WLG, indicating lamps for R- YB phases, over load

relay, Automatic water level controller, Ammeter &

Voltmeter each with two way selector switch

incoming wires duly socket Crimped, Panel to be

erected on angle iron frame grouted on wall as

directed. Star Delta & main contactor, overload

relay, thermal / Electronic Star delta cutoff timer,

start - stop push buttons. The isolator overload relay

& contactors of L& T, Siemens, Redex or Cuttler

Hamer make only. Panel to be erected on angle iron

frame ground on wall.make-Sky/Belife/L&T

118 Piping for Fire Safety Works Providing & Laying

'C' Class Heavy G.I. pipe laying. Supply,

fabrication, installation, hydro testing & painting of

above ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................100 mm diameter 24.00 1960.00 Rmt.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

119 Piping for Fire Safety Works Providing & Laying

'C' Class Heavy G.I. pipe laying. Supply,

fabrication, installation, hydro testing & painting of

above ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................80 mm diameter 1.00 1594.00 Rmt.

120 Pressure Switch with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure Gauge

with Siphon Tube and Cock. MOC:-100 mm Dial-

Glycerin filled- Stainless Steel Body Pressure

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Danfoss/Orion/Indfos 1.00 1780.00 Nos.

121 Pressure Gauge with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure Gauge

with Siphon Tube and Cock. MOC:-100 mm Dial-

Glycerin filled- Stainless Steel Body Pressure

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Airmaster/H guru/Fiebig 1.00 1535.00 Nos.

122 NON- Return Valve Dual Plant Supply, Installation

and Testing of conforming to IS: 5312 complete

with rubber gasket, GI bolts, nuts, washers etc. as

required with necessary pipe fitments, hardware and

consumables. MOC:-Body: SS.plate SS

100 mm dia make-Zolato/Kartar/Osko 1.00 10800.00 Nos.

123 Fire Hydrant Landing Valve IS 5290 (Stainless

Steel (SS-304), ISI Marked): Supply, Installation

and Testing of: Fire Hydrant Landing Valve with

necessary pipe fitments, hardware and

consumables. Stainless steel 63 Female single

outlet type – “A“Hydraulic,Test : 21 Kgf/cm2

working parts, Water Test : Water tightness

14kgf/cm2, Flow Test : 900 LPM at 7 kgf/cm2,

MOC:-Body: Stainless Steel (SS-304), Working

Parts: Stainless Steel (SS-304), Coupling: Stainless

Steel (SS-304), Standard: -ISI Marked. Size:-63

mm (Flange End: NB 75 mm, PCD 160 mm)

MAKE : Newage/Aaag/Sangam 2.00 4265.00 Nos.

124 Fire Hose reel drum Ahemdabad type 25 mm x

m Supply, Installation and Testing and

commisoning: ISI 884. With Thermoplastic pipe

with SS Shuttoff Nozzle. Standard: - ISI Marked &

TAC Approved Hose. Size:-25 mm dia x 30 m long

. MAKE : Newage/Sangam/Fusion 2.00 3890.00 Nos.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

125 Fire Hose pipe type B Is 636 and male female

coupling intenseous SS 304 with GI binding legth

15mtr complete set . MAKE :

Newage/Sangam/Fusion 4.00 3675.00 Nos.

126 Cabinet For Fire Hose (Hose Box)- Double door

Type Supply, Installation and Testing of: Fire Hose

Cabinet (Hose Box) suitable to accommodate 15 m

long fire hoses and 01 no. of nozzle. With Lock-n-

key facility. Wall Mounting Design. MOC:

Gauge MS Box with Powder Coating Standard with

Size 500mmX500mmX250mm:- Suitable MAKE :

Newage/Sangam/Fusion 2.00 3402.00 Nos.

127 Short Branch Pipe IS 903 Conforming Nozzle.

Supply, Installation and Testing of: Short Branch-

pipe Nozzle. MOC: Stainless Steel (SS-304).

Standard: ISI Marked, Heavy Quality. Test :

Kgf/cm2 No. MAKE : Newage/Aaag/Sangam

128 Supply Installation and commisioning of 25mm

Brass Ball valve for connection of hose reel

thermoplstic pipe make-Zolato/Venus/Sant 2.00 1780.00 Nos.

129 Butterfly Valve 100mm Dia IS

Providing fixing testing and commissioning of SS.

Butterfly valve of class PN 1.6 rating of following

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk:

SS, Seat: Nitrile.Make Zolato/Kartar/Osko 1.00 7640.00 Nos.

130 Fire Service In-let (In-let Connection for Fire

Brigade)-2 Way Type. Supply, Installation and

Testing of: Fire Service Inlet with necessary

hardware and consumables. MOC:-Body: Heavy-

uty CI. Couplings/NRV:SS Standard: -Made As per

IS Standard- Heavy duty quality. Size:-Couplings:

63 mm, 100 mm E-table Flange End .MAKE :

Newage/Sangam/Fusion 1.00 3652.00 Nos.

131 Providing, Installation and Testing Fire

extinguisher IS 15683-2006 ISI marked BIS with

Peso 3 years ABC powder type 6 Kg. Supply,

installation and testing of ABC powder fire

extinguisher necessary hardware and consumables.

Stored pressure mechanism. Charged with MAP-

50% (ABC) Dry powder. with wall mounting

clamp.Make -V Safe/ Kanex /Ceasefire 4.00 1825.00 Nos.

132 Providing, Installation and Testing of Fire

extinguisher - CO2 Gas type 4.5 kg. Supply,

installation and testing of CO2 Gas fire

extinguisher with necessary hardware and

consumables. Standard - Confirming to IS:15683-

2006 with ISI mark with Peso 5 years certified.

Make - V-Safe/Kanex / Ceasefire 5.00 4275.00 Nos.

133 Providing and fixing AUTOGLOW Signages in

Block / Small Letters of Specified Sizes: as per

design and requirement as directed by EIC. 10.00 185.00 Nos.

134 Providing and fixing, testing and commissioning of

Conventional Fire Alarm control panel for G+1

building for 2 zones with complete wiring feeting

required as per engineer insruction 1.00 16890.00 Job

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

135 Providing and fixing, testing and commissioning of

Hooter cum strobe sounder with wiring complete

fittings. 4.00 1456.00 Job

136 Providing and fixing, testing and commissioning of

Manuel Call point with wiring complete fittings. 4.00 1230.00 Job

137 Making of hole by core cutting in concrete member

or masonary wall of diameter 0 to 200 mm as per

requirement including all man material and charges

of core cutting machinery as directed by EIC 4.00 700.00 Nos.

138 Charges for administrative consulting for obtaining

Fire NOC from RMC and providing fire system

annual maintenance contract with all the requried

docuemnts and process & mockdrill, awarness

traning for staff as per rules of fire at every

months for three year as per GOG norms. 1.00 85000.00 Nos.

Estimated Cost Sectoin-II (FIRE SAFETY WORKS) in Rs.

139 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat III 179.00 449.45 Pt.

140 Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete cat-III 25.00 629.23 Pt.

141 Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with

following type accessories cat-III 36.00 241.39 Pt.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

142 Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat iii

143 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge (3) Two

Pin/RJ-11 Telephone Socket [B] For Two Gang cat-

III 7.00 200.99 Each

144 (7) Blank Plate Single Cat iii 57.00 24.24 Each

145 (8) Computer RJ-45 socket Cat iii 21.00 153.52 Each

146 (9) 16 Amp. SP one way switch cat-III 4.00 172.71 Each

147 (10) 6/16Amp. Universal socket cat-III 8.00 190.89 Each

148 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole

Modular MCB Switch cat-III 4.00 390.87 Each

149 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

150 Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC

pipe and accessories (a) 2 wire 1.5 sq. mm

152 providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm 138.00 107.06 Mtr.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

155 providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs,

nuts and bolts if required.(e) One wire 6.00 sq. mm

156 (h) One wire 25.00 sq. mm 2.00 225.23 Mtr.

157 Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs 121.00 19.19 Mtr.

158 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C]

159 Providing & erecting main Distribution (MDF)

indoor type, back mounted frame as per DoT

standard approved with krone strips (a) Suitable for

10 pair 1.00 949.40 Each

160 Providing & erecting Switch board for Computer

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

front plate, modules erected with necessary

connections as directed 1 no. 6A/16A universal

plug-switch combined. 3 nos. 6A Switch 3 nos. 6A

For Modular Type Accessories cat-III 21.00 1081.71 Each

161 Decorative call bell Ting-tong box type 250 volts

complete erected 3.00 68.68 Each

162 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED

driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Tube Light with integral

driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat-III 48.00 373.70 Each

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

163 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20 (i) 5-9 watts,Surge-2 KV Cat iii

164 (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 15 watts, Surge-2

KV Cat iii 98.00 427.23 Each

165 Providing and erecting Approved make Three Phase

& Neutral LT Heavy Duty Switch Disconnector

Fuse Unit Cubical type for panel mounting

complete with operating mechanism suitable to

operate on 415V A.C. , 23A duty With HRC fuses

of suitable load confirming to IS. 13947 (Part I &

III). of following capacities.(c)100 Amp Cat iii

166 Pproviding and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU

only Cat III 1.00 6173.12 Each

167 Providing and erecting Approved make Earth fault

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all

internal connections & complete erected in existing

M.S.housing.. (1) 15 A -100 A , CT Ratio 1/100

168 Supplying & erecting approved make Four Pole

415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty

confirming to IS for (B)63 A Cat-III 1.00 4785.38 Each

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

169 Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to

each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp.

Capacity 1.00 1961.42 Rmt.

170 providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat-III 53.00 112.11 Each

171 Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp.

cat-III 18.00 295.93 Each

172 Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40 Amp.

cat-III 25.00 668.62 Each

173 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)(iv)12 way 3.00 1492.78 Each

174 (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type

(PPI) (b) sheet steel double door (i)4 way 1.00 2339.16 Each

175 providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed (ii) 40Amps. DP

cat-III 6.00 2235.13 Each

176 Providing and erecting Annealed bare Copper wire

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

177 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted

by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

178 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy

duty end terminal connection, danger notice

board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams)

The panel shall be supplied with following

approved manufacturers with following size. (B)

The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory

(i) with 350mm depth

179 Providing , erecting , fabricating the M.S. structure

as per requirement on site incorporating proper size

of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide

with erection on site as per direction of engineer in

charge with necessary grouting, cementing,

plastering & finishing complete. 30.00 77.77 Kg

180 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size

of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm

181 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for

following size of cables.(B) 3 & 1/2 core 35/50 Sq.

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

182 Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm. 2.00 15.15 Each

184 Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down rod

erected with earthing.(Make shall be approved by

Engineer in charge)) 25.00 1948.29 Each

185 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing. 17.30 108.07 Mtr.

186 Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

finishing. 25.00 108.07 Each

187 Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box. 25.00 18.18 Each

188 SITC of Digital / PCM / TDM EPABX System

having SMT design, system with flexible universal

slots. Inbuilt Auto attendant facility, Minimum

Nos. conference, Analog extension line, Calling

GSM, E&M line, PRI / EI & VOIP program me

through Analog telephone digital key from

Ethernet, public address cord, shall have

unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-

Locking, Class of Service, Quick Dial-Single Digit

dialing of any two external number, Once only ring

device, Chairman / Secretary - Do not disturb

Facility, Power Down Mode, Hot Line, Hot

Outward Dialing, Day Night Mode, Auto Call

Back, Barge-in, Call Pick Up & Call Transfer, Call

transfer while Ringing with Voice Guide System,

(DISA), Caller ID (CLI), CLI Base ECF, CLI Base

routing Internet Ready Port, External Music Port,

Call Budgeting, Call Most Calculation (ASMDR),

DID Direct Inverse Dialing, External Music Input,

Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent

Authority i.e. not Below the rank of Executive

Engineer ] [A] No of Extension 16, No of Junctions

6, 8 Port IP Resource in-built, 4 Port Web base

Video Conferencing, No of expandable ports :

Operators Console - 01 Compatible : ISDN

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

189 Providing and erecting Standard Push button

telephone (DTMF) Phones [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ] 7.00 311.08 Each

190 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet

& outlet connection. The body of water cooler will

be made from Stainless Steel. ◦ 1.00 41342.33 Each

191 Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC

pump capacity 80 psi, mention with 40 psi inline

type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH

capacity & erected as directed [B] 25 Ltr / Hr with

30 Ltr. Storage Tank 1.00 13053.24 Each

192 Supplying and erecting approved make panel

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc

.with manufacturers calibration certificate. 1.00 1275.63 Each

193 Supplying and erecting approved make panel

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate. 1.00 1558.43 Each

194 Supplying and erecting Ammeter / Voltmeter

selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections. 2.00 317.14 Each

195 Providing & erecting L.T. Current Transformer

with bar primary 50/5 to 1000/5 ratio 15 VA burden

erected in existing CRCA box duly secured with

insulating materials connected to the meter 3.00 274.72 Each

196 Supplying and erecting approved make suitable

panel indicator LED type lamp, lens cover,

complete erected with necessary connections. 3.00 43.43 Each

197 Providing & erecting open well horizontal mono

block pump set with cast iron body, complete for

three phase submersible motor having [C] For 3 HP

3 phase open well horizontal mono block pump set

suitable for 85 LPM to 270 LPM @ 11 mtr to

mtr head suitable for 50/65 mm dia delivery pipe

Cat.II 2.00 15707.52 Each

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

198 Supplying & erecting approved make motor

control cubical panel (Direct - on - line) made from

16 G. CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector

switch incoming, wires duly socket crimped, main

contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted

on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make

only. (A) DOL up to 5.0 H.P.

199 Lowering of submersible motor pump set at the

depth of following ,complete with required. Nos.

and size of casing pipes erected by means of proper

chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the

load of the pump set and pipe assembly filled up

with water(D)For Open well Horizontal

submersible pump set for sump well (i) 1 HP to

200 Providing and erecting ISI marked PVC insulated

PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size.(B) 3 Core

201 Supplying of following size of HEAVY UPVC

column pipe with coupler and wire lock [B] 50 mm

dia 2.00 359.56 Rmt.

202 Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with

over-voltage protection.(ii) above 48 to 60 Watts

Cat iii 15.00 4997.48 Nos.

Estimated Cost Sectoin-III (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ I +II + III ] in Rs …

SR. No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

203 Amount from Sale of IMLO by Dismentalling

existing Quarter at jetpar S/s and carrying away all

material received from dismentalling. Party has to

lift all dismentall serviable and un serviceable

material from site and making site clear in all

respect. All lead and lift is in scope of party. Rates

includes all risk of accident. No any property/live

stock /human being of private as well as of

PGVCL shoud be damged during execution of

work. All responsibility shoul be of contractor. For

sale of this old property material, party has to

mentioned rate which will be deducted from bill of

party. Rate quoted for whole tender will be effected

to this item also, in reverse trend. (Note: Imlo

quantity is considered according to itemwise

measurement Dismantling Item Quantity, after

execution of work, the actual quantity will be

measured; the effect of the same will be given in

this item and final payment will be made as per

actual quantity.) 1.00 210823.00 Job

TOTAL AMOUNT TO BE CREDITED TO PGVCL in Rs …

TOTAL AMOUNT TO BE CREDITED TO PGVCL in Rs …

Estimated cost of work for Civil Work, Fire Safety & Electrical Work

Bidder's Offer (B)

Bidder's Quoated Amt. (C ) i.e. [C= (A) +/- (A)*(B)]

GST @ [CGST @ __% + SGST @ __%] (D = C*__%)

Bidder's Total Quoated Amt. with GST (E) (E = C+D)

Rebate charges to be paid to PGVCL Sale of IMLO by Dismentalling existing Quarter

Bidder's Offer (G)

Bidder's Quoated Amt. [ H = (F) +/- (F)*(G)]

GST @ [CGST @ __% + SGST @ __%] (I) (I=H*__%)

Bidder's Quoated Amt. with GST (J) (J = H + I)

Bidder's Total Quoated Amt. with GST & TCS for Demolition work (L = J + K)

Bidder's Net Quoated Amt. (M) i.e. (M = E - L)

(Note : Prices will be evaluated i.e. L-1, on Bidder's Net Quoated Lowest Amt. i.e. on "M" Amt.).

Chief Engineer(Material)

PGVCL, Corporate Office