REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION, SUMMER AND WINTER APPLIANES OF MH, DAD COMPLEX AND ADJOINING AREA UNDER GE SHIKARGARH IN ARMY AREA JODHPUR

Amount

Preventive maintenance for proper checking of Ceiling fan/exhaust fan/wall mounting fan, Padestal fan etc of any make, type & sweep including checking the serviceabilty, noise, rubber bush, tightning of nut bolts etc of ceiling fan, exhaust fan, wall mounting fan, Padestal fan etc in the presence of MES representative, all as directed by Engr-In-Charge. Note : For Srl No1 : Any unsv parts reqd for replacement shall be measured and paid separately under respective item of Schedule as supply only.

Taking down ceiling fan, exhaust fan, wall mounting fan, Padestal fan etc of any make, type & sweep including checking the serviceabilty of ceiling fan, exhaust fan, wall mounting fan, Padestal fan etc in the presence of MES representative, transporting the same to work shop and refixing the same after replacing of unserviceable parts all as directed by Engr-In-Charge. Note : Any unsv parts reqd for replacement shall be measured and paid separately under respective item of Schedule as supply only.

Dismantling and Removing old burnt copper wire winding of ceiling fans of any size & sweep of any make and rewinding with new enameled super copper wire of existing gauge as per old copper winding incl providing insulation by varnishing (golden), cleaning, oiling, greasing etc all as specified and directed by Engr-in-Charge.

All as per Item No 3 as above but for Exhaust fan of any size & sweep of any make.

All as per Item No 3 as above but for Wall mounting fan of size & sweep of any make.

All as per Item No 3 as above but for Padestal fan of size & sweep of any make. Note : For Srl No 3 to 6 : The super enameled winding wire is to be provided shall be any one make of Devidayal/Usha/Chetak of appropriate gauge as directed by Engr-in-Charge.

Dismantling carefully all parts of ceiling fans/ Exhaust fan/ Cabin fan/ Table Fan of any size & sweep of any make, cleaning, oiling, greasing etc and refixing all the parts and testing all as specified & directed by Engr-in-Charge.

Supply only capacitor of 2.5 Mfd capacity for ceiling fans/exhaust fan/Cabin fan/Table fan of following capacity/ISI marked Make : Havells/Crompton/Bajaj/Tibcon/Orient.

All as per item No 8 as above but 4.0 mfd.

Supply only ball bearing suitable any type for ceiling fans of following size complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA

Supply only ball bearing suitable any type for exhaust fans of following size complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA

Supply only gun metal bushes of suitable size for any type and any sweep of ceiling fans complete all as specified and directed by Engr-in-Charge.

Supply only MS clamps (Standard size) with rubber real with MS nut, bolts, check nut & split pin for ceiling fan complete.

Supply only canopy for ceiling fans. Make:- Usha/Khaitan/Crompton

Supply only fan blade for ceiling fan of any type & size. Make:- Usha/Khaitan/Crompton

Taking down old unserviceable PVC exhaust fan motor and supply and fixing PVC exhaust fan motor of any type & size. Make:- Usha/Havells/Crompton

Taking down old unservicable exhaust fan motor and supply and fixing of exhaust fan motor of any type & size. Make:- Usha/Havells/Crompton

M & L for making of bearing cover housing as per fan shaft diameter of any type and size of ceiling fan and fixing at ball bearing in place of bush of required size by means of lathe machine (ball bearing shall be measured & paid separately).

Supply only fan blade for Exhaust fan of any type & size.

Supply only fan blade for Cabin fan/Table fan of any type & size.

Supply and fix in replacement of down rod up to 1.8 mtr including check nut bolts and quarter pin for ceiling fan complete all as directed by Engineer-In-Charge.

M&L for two coats of spray Painting of ceiling fan of any make, type & sweep with one coat of approved first quality synthetic enamel paint matching to the existing color including writing the MES No. all as directed by Engineer-In-Charge.

Supply & fix for flexible PVC unsheathed twin core copper conductor cable of size 23/0.077 in nominal area and split pin all as required and directed.

Supply and fixing in repair electronic type regulator 240 Volts. Make Anchor or equivalent of CONA, SSK.

Supply and fixing in repair modular fan step regulator 100 W, 2 module. Make: Legrand/Havells/Anchor

Supply and fixing in repair Modular switch 6 Amp, one way, 1 module Make:- Legrand/Havells/Anchor

Supply and fixing in repair Modular Bell push switch 6 Amp, one way, 1 module Make:- Legrand/Havells/Anchor

Supply and fixing in repair Modular switch 6 Amp, two way, 1 module Make:- Legrand/Havells/Anchor.

Supply and fixing in repair Modular switch 16 Amp, one way, 1 module Make:- Legrand/Havells/Anchor

Supply and fixing in repair Modular socket 6 Amp, 2 module Make:- Legrand/Havells/Anchor

Supply and fixing in repair Modular socket 6/16 Amp, 3 module Make:- Legrand/Havells/Anchor

Supply and fixing in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps. Make Legrand / C&S / Havells

Supply and fixing of metal clad plug top protected type 20 Amps ,230 volts compete all as specified and directed, Make: Havells/Bajaj/Strandard.

Supply and fixing of metal clad socket protected type 20 Amps ,230 volts compete all as specified and directed, Make: Havells/Bajaj/Strandard.

Taking down and refixing storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection the from main and repairing the water heater storage type capacity 25/35 ltrs of any type and make. Checking the serviceability of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.

Supply only for replacement new heating element including rubber ring, washer, holding clamps and nuts of 1.5 / 2 KW capacity of suitable size complete all as specified & directed. Make : Bajaj/Recold/Venus

Supply only for replacement new thermostat of temperature variating ranging from 25 degree centigrade, suitable for 25 litre capacity geyser complete all as specified & directed. Make : Bajaj/Recold/Venus

Supply only for replacement new PVC connection (heavy duty) of 15 mm dia with required length with 2 Nos of brass, chromium plated nuts of approved make & quality complete all as specified & directed.

Supply only safety valve suitable for 25 litre capacity geyser ISI marked.

Supply only pressure realizing valve fo size 15 mm dia suitable for 25 litre capacity geyser

Supply only geyser bottom and top plate suitable for geyser of any make, size & type duly painted 25 ltrs capacity complete all as specified and directed by Engr-in-charge.

S&F in replacment of stainless steel hard ware set (appratus)complete assembly consisting inlet and outlet suitable for 25/35 ltr capacity geyser of any approved make complete all as specified and directed.

Supply only of indicator lamp assembly for geyser complete all as specifed and directed by Engr-in-charge.

Supply only for replacement water heater of stainless steel inner tank suitable for 25/35 ltrs capacity.

Painting of geyser with spray painting white synthetic enamel paint one coat after preparation of surfaces as required at site of geyser 25 ltrs capacity including writing MES No. complete all as specified and directed by Engr-in-charge.

Taking out old and Supply & fix gun metal non return valve 15 mm dia including proper connection complete all specified and directed by Engr-in-charge.

Taking out old and Supply & Fix stop valve cast copper alloy, screwed down high pressure screwed both ends for iron pipe of 15 mm bore fancy type chromium plated complete all as specified.

Taking out old and Supply and fixing of 15 Amp plug top for Geysers etc.

Taking down and disconnecting the electric connection of UPS capacity upto 10 KVA from main supply and repairing the UPS, Checking the serviceability of all parts such as driver card, charging card, transformer & all electronic boards etc including batteries and refixing the same after replacing of unserviceable parts and assemblying complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.

Supply only IGBT for UPS.

Supply only driver card.

Supply only SMPS card.

Supply only Charger card.

Supply only Control card.

Supply only fuse of suitable Amps.

Supply only Sealed Maintenance free batteries 12 V, 26 AH . Make : Amaron / Exide / Okaya

Supply and fix in repair and replacement recessed and surface LED 1x4 PNEL ceiling light with high performance 40 watt Make : Crompton Cat part No LCTLRN-40-CDL(1X4) or equivalent in Wipro and Philips

Taking down old unserviceable existing and Supply, fixing, Jointing and testing 15 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors and making connections with existing pipe if reqd at site complete all as specified and directed.

All as per item No 58 but 20 mm bore Pipe

All as per item No 58 but 25 mm bore Pipe

Comprehensive repairing/maintenance/Servicing of Solar Water heater of Capacity upto 300 LPD of any make any model installed at various location at MH, and comprising of inspection, descaling, brushing and cleaning of collector panel, riser tubes, header tubes, heat absorber tubes, connecting pipes and examining of water tightness of the same after acid wash, cleaning and descaling and repairing of leakage, if any, using welding/brazing etc, complete all as directed

S&F of stainless steel inner tank 304 L grade 0.5mm thick of dia 380mm, with PUF insulation, Galvanised powder coated outer tank of dia 480mm, with volume 300 ltrs and including all fittings and fixtures in repairs complete all as specified and directed.

S&F Rotational moulded poly-ethylene Triple Layer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures in repairs complete all as specified and directed.

S&F in replacement, of industrial immersion heater of any type and any size, 440 volt, ISI marked, suitable for solar water heating system, complete all as directed. Make - Dasspass / Theeta / Nanda

S&F in replacement, of aluminium foil of thickness 26 SWG on the distribution GI pipe lines of 50 mm bore size, including all fixing accessories etc, complete all as directed.

Supply only, in replacement, of thermostat, with temperature range of 0°C to 75°C, ISI marked, suitable to run and cut off pump automatically of solar water heating system, complete all as directed. Make - Dasspass / Theeta / Nanda

Supply only, in replacement, GI tubing 50mm dia nominal bore, heavy grade, ISI marked with and including all fittings, in new or old position complete all as directed. Make : Jindal/ TATA/ Prakash Surya.

M&L for PCC (1:4:8) type D-2, using stone aggregate 40 mm size graded, with and incl necessary form work where required and fair finish to the exposed surfaces, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694, of 06 sqmm 04 core size, complete all as directed. Make - Havells / RR Kabel / KEI / Standard

M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit. 3. Make of Wire : Havells / Polycab / KEI / Finolex

All as per item No 70 but 2 run of 4 Sqmm

S&F of Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Havells Cat Part No DHDLVSRWGOFO04 / Schneider Elect / Legrand / ABB Note : MCCB & MCB will be measured and paid separately under respective items

All as per item No 72 but SPN 4 way DB suitable for SPN MCB

S&F of MCCB, A Frame, thermal adjustable magnectic setting, Ics = 75% 25 kA, 415V, 125 Amp, 4 Pole MCCB with over load and short circuit protection, complete all as directed. Make : Havells Cat part NoIHLASF0125 # / Schneider Elect / Legrand / ABB / Hager

S&F of MCB, C Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells

S&F of MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells

Supply & Laying of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 35 sqmm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Alu thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and slab covers will be measured and paid separately under respective items.

All as per srl item no. 77 here-in-before but with 16 Sqmm 2.0 Core

Excavation in trenches in hard / dense soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides, complete all as directed.

Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur Zone slab cover 25 to 30 cm wide and not less than 60cm long dry laid, abutting each other gap between adjacent slabs not exceeding 10mm for protection of underground cable complete all as specified

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 10cm after laying of cable in trenches complete all as directed and sand cover to under ground cable complete all as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified.

S&F of GI pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M&L for point wiring (Concealed modular) complete for one light point / fan point / exhaust fan point / bell point controlled by one 1-way switch / bell push, with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked in existing conduit with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed. Make of Wire : KEI / C&S / Finolex / Havells / Anchor. Note : 1. The cost of modular type Metal flush boxes and modular accessories like inner/outer cover plates etc is deemed to be included in quoted rate and switches / sockets are paid separately. 2. The cost of cutting chases on wall and making good surface on wall are deemed to be included in the quoted rate

All as per srl item no. 87 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

All as per srl item no. 87 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

All as per srl item no. 87 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire complete all as specified and directed by Engr-in-Charge

S & F Modular switch 1 way 6A , 1 module size complete all as directed.

S & F Modular switch 1 way 16A , 1 module size complete all as directed.

S & F Modular Bell push way 6A with 2 module size with indicator complete all as directed.

S & F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F of modular type regulator 2 module A/C 240 Volts.

S & F in replacement of Modular switch 1 way 6A , 1 module size complete all as directed.

S & F in replacement of Modular switch 1 way 16A , 1 module size complete all as directed.

S & F in replacement of Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S & F in replacement of Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F in replacement of modular type regulator 2 module A/C 240 Volts. Note: Make of Modular switches / sockets and other accessories : MK(by Honeywell) / Legrand (Myrius) / Havells (Crabrtee)

M&L point wiring One light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch (Concealed Normal) complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.) Make of wire : KEI / C&S / Havells / Anchor

One fan / exhaust fan point controlled by one no 5 Amp switch.

One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item no. 18 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all s specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F of resistance type regulator A/C 240 Volts. Make : Gold Medal / Havells (Reo) / SSK

S&F of Bell push, flush type 5 amps, 230 volts. Make : SSK / Havells (Reo) / Gold Medal

S&F of electric call bell ding dong AC 230 volts Single Pole. Make : Gold Medal / Havells / Crompton

S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Havells / SSK / Gold Medal

S&F in replacement of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F in replacement of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F in replacement of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F in replacement of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F of Lamp holder, metal cased, bakelite body, 230 volts, with 9W LED lamp complete all as specified and directed. Make : SSK / Havells (Reo)/ Gold Medal

S&F of 20W LED tube light (tube rod), 6000K 4 feet and making connection of tube light fitting to ceiling rose by 23/0.0076 copper flexible wire all as specified and directed at site. Make : Havells cat part No LHEXCEP7UN1W020 / Compton Greeves / Wipro / Philips

S&F of Batten for LED tube light retrofit G-13 Pattern 4 feet, fitted into the wall / ceiling complete all as specified and directed at site. Make : Havells cat part No LHFXCEP1TN1W020 / Compton Greeves / Wipro / Philips

S&F of LED light fitting 1 X 9/10 watt (2 feet), decorative ultra slim type, with driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. Make : Havells / Crompton / Wipro / Philips

S&F of Energy efficient round surface mounted polycarbonate fixture circular panel 7W LED 6500K down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Philips / HAVELLS / WIPRO / CROMPTON

S&F of bldg security LED Light Luminaire of 60 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with fixing of GI pipe 40 mm band including drilling holling nuts & bolts 2 code of red oxide paint on GI pipe and fixing with wall security light on building wall complete all as specified and directed. Make : Philips / Crompton / Wipro

S&F of plastic ventilating fan 200 mm sweep plastic body including louvers with cutting chases on brick wall and grounting with nut bolts on aluminium frame complete all as specified and directed. Make : Crompton / Havells / Orient Note : Rates are deemed to be included for cutting chasing on wall or window, grouting with nut bolts etc

S&F of exhaust fan 300 mm sweep steel body including louvers with cutting chases on brick wall and grounting with nut bolts on aluminium frame complete all as specified and directed. Make : Crompton / Havells / Orient Note : Rates are deemed to be included for cutting chasing on wall or window, grouting with nut bolts etc

S&F sheet metal enclosure SPN 240 Volts having 2 pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified cat No 507811 Make : Legrand / Havells / L&T

S&F sheet metal enclosure 2 pin earth plug Make : Legrand / Havells / L&T

S&F of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Havells / Schneider Elect / Legrand / ABB / Hager

S&F of MCB, C Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells

S&F of MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells

Taking down old sub main wiring and M&L for concealed sub main wiring with 2 run of 16 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 16 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Two run of 10 Sq.mm. and one run of 10 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces. Make of wire : Finolex/Havells/KEI, Make of PVC conduit : Finolex/Modi/Polycab.

All as per srl item no. 132 here-in-before but with 2 run of 6.0 sq mm FRLS copper wire with one run 6 Sqmm FRLS copper cable as earth wire.

All as per srl item no. 132 here-in-before but with 2 run of 4.0 sq mm FRLS copper wire with one run 6 Sqmm FRLS copper cable as earth wire.

Supply & installation ON LOAD change over switch (Side Handle) 415 Volts sheet metal enclosure 4 pole of capacity 100 Amps complete. Make : Havells / Legrand / C&S

Supply & Laying of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 70 sqmm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and slab covers will be measured and paid separately under respective items.

All as per srl item no. 135 here-in-before but with 50 Sqmm 3.5 Core

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

Servicing/maintenance/Repair of DG SET of 200 KVA installed at DAD Complex for repair/replacment of the following components all as specified and directed by Engr-in -charge. (a) Checking water temperature safety control (b) Checking and correcting impeller of water pump for excess play. (c) Checking and correcting turbocharger, any oil leakage,tightening of mounting screws and nuts etc. (d) Cleaning,tightening all electrical connection of engine (e) Checking and cleaning of generator bushes(Alternator) and commutator (f) Cleaning of entire engine. (g) Checking exhaust and inlet manifold bolts and capscrew (h) Checking engine blow by (h1) Cleaning of radiator inside and outside by removing and refixing after cleaning. (j) Checking and adjusting injector and valves. (k) Cleaning fuel inlet connections and screw, (l) Checking of oil. (m) Replacing of radiator hoses of different sizes with clamps (n) Checking of vibration damper Note : Item Nos 60 & 61 : Any following item required for servicing / preventive maintenance will be measured and paid separately under respective items

-Ditto- as above item No 60 but for 50 KVA DG Set

Supply only Oil filter suitable for 200 KVA DG set

Supply only Oil filter suitable for 50 KVA DG set

Supply only K-Oil Super suitable for 200 / 50 KVA DG set

Supply only Fuel Filter suitable for 200 / 50 KVA DG set

Supply only Set of hose suitable for 200 KVA DG set

Supply only Element suitable for 200 / 50 KVA DG set

Supply only Element air cleaner suitable for 200 / 50 KVA DG set

Supply only Supply only V fan belt suitable for Gen Set 200 / 50 KVA

Supply only Coolant

Dismantling the PT/FI pump assembly, repair / overhauling / calibrating in authorised lab including replacing tornout rings,plunger,damper plate gasket etc. including, refixing, reconnecting, testing & commissioning complete as specified and directed.

Maintenance, servicing and testing of split type/window type AC, capacity upto 2 Tons, any make, by cleaning cooling coil, condenser fins, blowing of dust from machines/air filters cleaning with VINICLEAN solution using pressure jet system with water , checking and decarbonising all electric system oiling/greasing of blower motor, checking and removing any vibration and leakage in the equipment including checking/repair to inter locking device for winter/summer to ensure cutting off of compressor/heating in case of failure of blower motor including taking down and refixing in position complete all as directed by Engineer-in-Charge. Note - Cost of minor repair, replacement of petty items such as nuts, bolts, washers, screws, rubber mounting pads of compressor etc, transportation of equipment to workshop and back is deemed to be inclusive in the unit rates quoted by the contractor.

S&F, in replacement, new compressor for split type AC 2 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed. Make: Shriram/ Kirloskar/Voltas/Carrier/Whirlpool

M&L for finding out leakage with the pressure testing of the condensor/cooling unit/ compressor of window type/Split type AC of 2 Ton cap including dismantling the same for recharging with R-22 gas or as per manufacturer's instruction and stop leakage by brizing/soldering including charging the gas to required level and testing the AC for the entire satisfaction of EIC.

S&F nylon type filter pad 20 micron for window type AC of capacity up to 2 ton including taking out unserviceable filter pad complete all as specified and directed.

S&F, in replacement, running capacitor 5 MFD 230 volts for blower motor complete all as specified and directed. Make : Keil / Asian /Tesla.

Supply and fixing in replacement starting capacitor clip type of cap. 80-100 MFD,440 suitable for 1.5/2 Ton capacity window/Split type AC complete all as directed by Engineer-in-Charge make- Kell/Tesla/Sharda/Escop

S&F in replacement of running capacitor, 36/45/50 MFD suitable for 1.5 / 2.0 Ton capacity window/split type AC of approved make.

S&F in replacement of indoor unit complete set suitable for 2.0 Ton capacity Make : Voltas / Whirlpool / Blue Star

S&F, in replacement, starting relay suitable for split type AC of capacity up to 2 ton complete all as specified and directed. Make : Shriram/Renutrol

S&F, in replacement, condensing fan motor 1/8 HP, single phase suitable for split type AC up to 2 ton capacity including testing complete all as specified and directed. Make: Khaitan or Universal.

S&F, in replacement, power circuit breaker (PCB) kit for split/window type AC complete all as specified and directed.

Supply, fixing & testing new compressor for water cooler of capacity 60/120 Ltr, including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed. Make Kirloskar, or Shriram

S&F, in replacement, thermostat switch suitable for water cooler, any capacity/make including taking down unserviceable thermostat switch complete all as specified and directed. MAKE: SHRIRAM or RANUTROLL or INDOFOSS.

S&F, in replacement capillary filter drier 2 way suitable for water cooler including taking out old unserviceable capillary filter complete all as specified and directed

S&F in replacement drain out pipe of split type AC complete all as directed by Engineer-in-Charge.

S & F single phase preventor with accessories suitable for electric motor 12.5- 40 HP capacity with necessary electrical connection by using proper size of single core copper wire complete incl taking down/ removing old U/S with necessary electrical connection complete as directed. make : Minilec Cat No-VSP1 AST/ L &T/Simens

Supply and fixing Analog voltmeter 0-500volt rage of size 2.5x2.5",3 phase, 415 volt suitable for the LT Panel board where directed including taking out old burnt out Voltmeter including electrical connection with suitable size of copper wire complete all as directed & specified , Make:L&T/ AE/MECO or Equiv

Supply and fixing digital Ammeter 0-150 Amps of size 4x4", capacity ,3 phase, 415 volt with operating voltage 210 V nos suitable for the LT Panel board where directed including taking out old burnt out Ammeter including electrical connection with Esuitable size of copper wire complete all as directed & specified ,Make:L&T/ Schenider / HPL ,cat no-PAMEBRITA 32 or Equiv

Supply and fixing Indicator assy 3 pcs per set suitable for 230 volt matching with exisisting one for the LT Panel board where directed including taking out old U/S indicator assy including electrical connection with Esuitable size of copper wire complete all as directed & specified , Make:AE/ HPL or Equiv

Prevantive maintenance and cleaning of filters including minor replacement of defective parts of Air cooler plants- 06 Nos. electrically operated installed at DAD complete all as specified and directed of the following capacities Note : (i) Servicing and cleaning of all Air cooling plant will be carried out one in two months as per directed by Engr-in-Charge. (a) Air cooling plant 4500 cfm- 02 No (b) Air cooling plant 12000 cfm - 02 Nos (c) Air cooling plant 9000 cfm - 02 Nos

M & L for taking down unserviceable Electric motor from 3 to 7.5 HP capacity from foundation dismantling pump motor for servicing/ replacement of unserviceable bearing, and rewinding of motor reassembling after repair/servicing reinstall on existing location & testing on full load complete.

All as per item No 168 above but capacity of pump motor 2 HP for air cooling plant

M & L for taking down unserviceable Electric motor pump set upto 1.5 HP capacity from foundation dismantling pump motor for servicing/ replacement of unserviceable bearing, gland bush and rewinding of motor reassembling after repair/servicing reinstall on existing location & testing on full load complete.

Material & Labour for taking down unserviceable mono block pump-motor of 15HP capacity from foundation, dismantle the pump- motor for servicing / replacement of unserviceable bearing, gland bush, and rewinding of motor, reassemble after repair / servicing reinstall on existing location & testing on full load complete after completion.

M&L Pre Air Filter wire mesh for fresh Air for Air Cooling Unit including taking down unserviceable and as per directed.

M&L 13 mm thick Nitriel rubber insulation with glass cloth and UB paint for xpose duct including taking down unserviceable as per dircted by Engr-in-Charge.

M&L for filter Honey Bee Pad/filter for air cooling system installed various location at New MH as per existing including taking down unserviceable.

Supply and fixing Complete Canvas Clothes (Zip arrangement) with S/S body frame of suitable size of any description as per existing and directed by Engr-in-Charge

M/s R K Enterprises