Providing and Placing Furniture for D-1 Type Quarters ( 1 unit) For Prant Officer & D Type Quarter (1 unit) For Mamlatdar at Pardi, Dist:- Valsad

Name of work :-

Providing and Placing Furniture for D-1 Type Quarters ( 1 unit) For Prant Officer & D Type

Quarter (1 unit) For Mamlatdar at Pardi, Dist:- Valsad

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Item Item of work Quantity Unit In figure Amount

1 Providing, Supplying, Making & fixing double bed size 1.90 mt x 4.00 Nos 19688.94

2.00 mt using Side of bed size 35cm with double 19mm thick

plywood all proof, 19 mm thick plywood bottom and 12mm thick

plywood Top surface & back of size 1.90 mt x 0.60 mt all proof of

good quality including fixing 1mm thick lamination sheet on all

Visible surface and 0.8 mm Thick Lamination Sheet on hidden

surface on plywood with fixing teakwood bedding including nails,

fevicol, Handle, Hinges, polishing including labour etc as directed by

Engg. charge complete.

2 Providing and Placing Three seated sofa of size 1605 x 760 x 840 2.00 Nos 12221.00

mm. The structure of sofa shall be made from teak wood framing

and 9 mm thick waterproof plywood finishing as per design,

including upholstered with 150 mm thick 40 density U-foam for

seat and 100 mm thick 40 density U-foam for backrest and covering

both with best quality tapestry of approved colour and design side

handle with teakwood of approved design and exposed surface

shall be polished with melamine finishing to the wooden work

etc.as directed by engineer-in-charge etc. complete.

3 Providing, Supplying, Making & fixing Tepoy (Centre and Corner 2.50 Sqmt 5979.20

Table) of size up to 0.90 m x 0.60 m x 0.45 m and top 12mm

toughened glass of size up to 0.85 m x 0.55 m with teak wood legs,

side &shaport including all faces polishing work as directed by

engineer-in-charge. Minimum section of tepoy for (i) leg 50mm x

50mm (ii) Horizontal long side 50mm x 50mm (iii) Horizontal short

side 50mm x 50mm (iv)Horizontal bottom support 30mm x 25mm

4 Providing, Supplying, Making & fixing Fix side box for bed side 0.76 8.00 Nos 4285.43

x 0.45 x 0.45m with two drawers using 19mm thick plywood all

proof with using 1mm thick lamination sheet heavy quality

channels including all labour as directed etc. complete.

5 Providing, Supplying, Making & fixing bed back using fully 19mm & 13.50 Sqmt 1794.77

12mm outer required width plywood all proof of BWR confirming

to IS 710 of green or century make, designs & grooves as directed

by architectural drawings.lamination of 1.0 mm thick in single or

double shade of green, broom or equivalent make of plain or

texture finish as directed on all visible face & polished work on

remaining surface on all non visible faces including Teakwood

batten patti also including all labours as approved by engineer-in-

charge etc. complete.

6 Supplying Matresses of size 1.95 mt x 2.05 mt using springwel 4.00 Nos 6888.20

Magic, Sleepwell, Curlon or equivalent quality foam of 40 density

and 4" thick including madarpat cover & Pillow and Printed Logo on

all things as approved and suggested by engineer-in-charge etc.

7 Supplying Double Bed Chadar or Bed sheet of size 2.40 mt x 2.40 mt 4.00 Nos 1333.20

& two Pillow cover size 0.45 mt x 0.69 mt Bombay Dyeing Cardinal

or its equivalent quality and print Department logo on all things as

suggested and approved by engineer-in-charge etc. complete.

8 Supplying all weather cotton rajai/ blanket of size 1.40 mt x 2.40 mt 8.00 Nos 833.25

of Bombay Dyeing or its equivalent quality and print Department

logo on all things as suggested and directed by engineer-in-charge

9 Providing and fixing Roller blinds of made out of imported fabric 28.10 Sqmt 2154.33

including channels ropes runners ,weights etc as per design and

installed as per with proper fixing as directed by engineer in charge

10 Providing & Supplying Executive High Back Revolving Chair office 1.00 Nos 11110.00

chair of make size with high back (25 mm thick U foam inside) on

Mild steel crome plated base anti tilt mechanisum frame High

quality product, Tilt mechanism with tiltlocking , moulded foam

seat & back penumatic height Adjustment Upholstered in high

quality double leather Swivel Mechanisum & Twin wheel casters

with , Great finish, Dimensions in mm seat Height 470mm to

550mm Width 28'inch & depth 25'inch height 21'inch , decorative

wooden with dunlop sheet arms - its lowest height is 36 inches and

heighest is 41 inches Product, Made from strong sturdy material

and colour as per suggested by Engineer in Charge or image. Chair

should confirm ANSI BIFMA Standards.

11 Providing, Making & Supplying Executive Table having size of 2100 1.00 Nos 23630.97

mm X 900 mm X750mm (Height) with Top 12mm toughened glass

in required size including three drawers and 1350 mm X 400 mm

X550mm (Height)Side Rack with three shutter storage cabinet.

teakwood leg support and 1 mm lamination in single or double

shade & colour as directed on all visible face and 0.80 mm white

lamination on all non visible faces Hettich make telescopic sliding

channel, Enox make S.S. sliding rail, S.S. Decorative handle, Ebco

make Keyboard tray with necessary fixtures & fasteners of standard

make as per detail drawing and image also including all labours as

approved by engineer-in-charge etc. complete.

12 Providing, Supplying, Making & fixing Wooden Cupboard of size 12.00 Sqmt 6147.87

1.36 x 3.00 x 0.45 mt. made of 19 mm thick allproof plywood which

BWR confirming to IS 710 of green or century make, designs &

grooves as directed by architectural drawings including two drawers

size of 0.45 x 0.55 x 0.15 mt, two shutter size of 0.45 x 3.00 mt and

19mm thick allproof plywood which BWR confirming to IS 710 of

green or century make self fixing at horizontal and vertical support

and lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and 0.80 mm

white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S. sliding

rail made or equivalent, S.S. Decorative handle, S.S.stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

13 Providing, Supplying, Making & fixing Dining table size 1.50 x 1.50 x 3.40 Sqmt 10709.03

0.75m made of 19 mm thick allproof plywood of BWR confirming to

IS 710 of green or century make, designs & grooves as directed by

architectural drawings. Lamination of 1.0 mm thick in single or

double shade of green, broom or equivalent make of plain or

texture finish as directed on all visible face including on teak wood

batten patti and 0.80 mm white lamination on all non visible faces

with all side decorative border upto 50mm thick for good

appereance. All should be complete with teakwood support & legs

including nails, fevicol, polishing on hidden surface including labour

etc as directed by Engg. in charge complete.

14 Designing, Manufacturing & supply of teak wood chair with wood 8.00 No 2429.05

seat and back without handle.with back side & bottom side danlop

sheet including Teak wood frame and Polishing as per design using

with cost of all labour as directed etc. complete.Minimum section

of chair for (i) Legs 40mm x 40mm (ii) Sides 40mm x 40mm (iii)

Bottom 25mm x 25mm (iv) Backside 40mm x 40mm

15 Providing, Supplying, Making & fixing TV Unit size 2.32x1.50m. 7.65 Sqmt 3061.31

made of 19 mm thick allproof plywood of BWR confirming to IS

of green or century make, designs & grooves as directed by

architectural drawings including three drawers of size

0.50mx0.25mx0.25m. lamination of 1.0 mm thick in single or

double shade of green, broom or equivalent make of plain or

texture finish as directed on all visible face including on teck wood

batten patti and 0.80 mm white lamination on all non visible and

remaining faces. Hettich make telescopic sliding channel, Enox

make S.S. sliding rail, S.S. Decorative handle,cable passing

arrangement with necessary fixtures & fasteners of standard make

also including all labours as approved by engineer-in-charge etc.

16 Providing and fixing of Ridge flashing for roof panel shall be made 275.20 Sqmt 858.67

out of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall

be of minimum 240 mpa steel grade confirming to IS 14246:1995

and shall have zinc coating of minimum 120 gsm as per IS:277:1992

, 5-7 microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron. The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by

pop rivet or self drilling/self stitching fastners @ maximum 450 mm

c/c along length of capping/flashing etc complete .

17 Steel work, welded in built up sections framed work including 4372.00 Kg 90.48

cutting, hoisting, fixing in position and applying a priming coat of

read lead paint & two coat oil paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as

in main and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like..

18 Providing and Placing Two seated sofa of size 1300 x 760 x 840mm. 4.00 No 8888.00

The structure of sofa shall be made from teak wood framing and

9mm thick waterproof plywood finishing as per design, including

upholstered with 150mm thick 40 density U-foam for seat and

100mm thick 40 density U-foam for backrest and covering both

with best quality tapestry of approved colour and design side

handle with teakwood of approved design and exposed surface

shall be polished with melamine finishing to the wooden work etc.

complete as per drawing.

19 Providing, Supplying, Making & fixing Wooden Wall Cupboard of 10.10 Sqmt 4473.29

size 1.36 x 3.00 x 0.45 mt. made of 19 mm thick allproof plywood

which BWR confirming to IS 710 of green or century make, designs

& grooves as directed by architectural drawings including two

drawers size of 0.45 x 0.55 x 0.15 mt, two shutter size of 0.45 x

mt and 19mm thick allproof plywood which BWR confirming to IS

710 of green or century make self fixing at horizontal and vertical

support and lamination of 1.0 mm thick in single or double shade of

green, broom or equivalent make of plain or texture finish as

directed on all visible face including on teak wood batten patti and

0.80 mm white lamination on all non visible faces & remaining

faces. Telescopic sliding channel made of Hettich or equivalent, S.S.

sliding rail made or equivalent, S.S. Decorative handle, S.S.Stopper,

S.S.pipe, good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

Rupees Eleven Lakh(s) Seventy Seven Thousand One Hundred Forty One And Paise Seventeen Only

I/We am/are willing to carry out the work at………% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender 1177141.17 Estimated amount put to

Deduct :………% below Add :………% Above

In words : In words :

1 The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore

in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

5 GST will be paid extra as per Govt. amendment.

Deputy Executive Engineer

Signature of Bidder Valsad (R&B) Sub-Division

Executive Engineer

Valsad (R&B) Division,