Clearing the site with unwanted growth

Advance ( Pre-Planting operations )

Survey with GPS ( Only staff to carry out. One man day is allowed for assistance) 329.426

Preparation of site for planting by clearing thorny unsaleable,unusable jungle growth, creepers, bushes etc. spreading the cut material all over the site and burning the same.

Light Jungle growth (> 20% and up to 30% ground area covered with Jungle growth) (02-01-004)

Uprootal of stumps to a depth of 45 cm (excluding unsuitable patches) with heavy machinery fitted with 0.90 m3 and above capacity bucket, filling the pits caused by uprootal and levelling.

Light Jungle growth (> 20% and up to 30% ground area covered with Jungle growth) (02-01-009 )

Collection and removal of uprooted stumps of all sizes, other debris etc., to outside the plantation site.

Light Jungle growth (> 20% and up to 30% ground area covered with Jungle growth) (02-01-013)

Filling the Site with Morrum or Fine red Soil

Excavation of trenches : For 1.00 mtrs. depth trench, filling with existing soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) complete for item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (*10 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.)

Supply of Braided 1" Hose pipe including cost and conveyance etc for watering

Supply of sticks for supporting of plants

Electrical portion

Supply and Fixing of 19mm outer dia1.80mm thickness regid P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings,Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) of Make: Avon plast / Modi / Sudhakar / Maco plast / Atul / Mercury / Finolex / Polycab / Kumar / AKG / Indian-tubes / Sun Light / Besto plast / Million plast / Durga / Nandi / Sun.

Supply and Fixing of 25mm outer dia1.80mm thickness regid P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) of Make: Avon plast / Modi / Sudhakar / Maco plast / Atul / Mercury / Finolex / Polycab / Kumar / AKG / Indian-tubes / Sun Light / Besto plast / Million plast / Durga / Nandi / Sun.

Supply and Fixing of 25mm outer dia 1.80 mm thickness rigid P.V.C. pipe for concealed wiring in new / existing brick building walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete of Make: Avon plast / Modi / Sudhakar / Maco plast / Atul / Mercury / Finolex / Polycab / Kumar / AKG / Indian-tubes / Sun Light / Besto plast / Million plast / Durga / Nandi / Sun.

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp flush type switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings of Grade-II:Make: Mercury/ Polycab / Havells / L&T / Atlas / Gold medal / Vimal / Milion/power flex/ Paragon/ Delton/Standard / Suncab / GM/ RPG /V-Guard/ KEI/ HPL /Anchor / Greatwhite / Gloster.

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp flush type switch to switch control box including all labour charges etc., complete for light, bell, fan and Exhaust fan points in Residential Buildings of Grade-II:Make: Mercury/ Polycab / Havells / L&T / Atlas / Gold medal / Vimal / Milion/power flex/ Paragon/ Delton/Standard / Suncab / GM/ RPG /V-Guard/ KEI/ HPL /Anchor / Greatwhite / Gloster.

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete of Grade-II:Make: Mercury/ Polycab / Havells / L&T / Atlas / Gold medal / Vimal / Milion/power flex/ Paragon/ Delton/Standard / Suncab / GM/ RPG /V-Guard/ KEI/ HPL /Anchor / Greatwhite / Gloster.

Supply and run of 5 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe / PVC Trunking for mains including all labour charges etc., complete of Grade-II:Make: Mercury/ Polycab / Havells / L&T / Atlas / Gold medal / Vimal / Milion/power flex/ Paragon/ Delton/Standard / Suncab / GM/ RPG /V-Guard/ KEI/ HPL /Anchor / Greatwhite / Gloster.

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe / PVC Trunking for mains including all labour charges etc., complete of Grade-II: Make: Mercury/ Polycab / Havells / L&T / Atlas / Gold medal / Vimal / Milion/ power flex/ Paragon/ Delton/Standard / Suncab / GM/ RPG /V-Guard/ KEI/ HPL /Anchor / Greatwhite / Gloster.

Supply and run of 5 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe / PVC Trunking for mains including all labour charges etc., complete of Grade-II:Make: Mercury/ Polycab / Havells / L&T / Atlas / Gold medal / Vimal / Milion/ power flex/ Paragon/ Delton/Standard / Suncab / GM/ RPG /V-Guard/ KEI/ HPL /Anchor / Greatwhite / Gloster.

Supply and fixing of 6 Amp 1 Way Flush Type switch on the existing switch board and giving connections of Make: Anchor / Gold medal / Indo asian / Havells / Vimal / Leader / Record /Toyoma / Million / Maru / GM / Great white / Mantero / HPL.

Supply and fixing of 16 Amp 1 Way Flush Type switch on the existing switch board and giving connections of Make: Anchor / Gold medal / Indo asian / Havells / Vimal / Leader / Record /Toyoma / Million / Maru / GM / Great white / Mantero / HPL.

Supply and fixing of 6 Amp 3/2 pin flush Type socket on the existing switch board and giving connections of Make: Anchor / Gold medal / Indo asian / Havells / Vimal / Leader / Record / Toyoma / Million / Maru / GM / Great white / Mantero / HPL.

Supply and fixing of 16 Amp flush Type 3 pin socket with shutter on the existing switch board and giving connections of Make: Anchor / Gold medal / Indo asian / Havells / Vimal / Leader / Record /Toyoma / Million / Maru / GM / Great white / Mantero / HPL.

Supply and fixing of 6 Amp Flush Type Neon Indicator on the existing switch board and giving connections of Make: Anchor / Record /Leader / GM / Gold Medal.

Fixing of given Tube light luminaire / PL fitting on wall / Ceiling / Trusses / Channels on PVC/ TW round blocks / Epoxy insulator / 3"x2"x1" TW reaper with all accessories, labour charges and giving necessary connections.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply and fixing of Three phase Electronic type energy Meter to operate in 415V, AC,50 Hz as per IS13010 Up to 40 Amps range with 200% over load capacity complete with connections etc., complete on the existing board. Make: BHEL / ECE /GEC / Havells / Capital / Anchor / India Meters / BCH / Conzerv / AE / Elmeasure / Meco / HPL / Enercon / Secure .

Supply and fixing of 8 Way SP & N Distribution board as per IS:13032 with IP-43 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete of Grade-I: Make: Legrand / L&T / GE / Siemens / Schneider / ABB

Supply and fixing of 20 Amps 2 Pin & Earth Socket Metal Plug Board with 1 No. 20 Amps SP MCB of 'C' series including the cost of MCB Concealed in the wall with neat plastering and giving necessary connections of Grade-I: Make: Legrand / L&T / GE / Siemens / Schneider/ ABB.

Supply and fixing of double pole / triple pole / four pole ISOLATORS with the following current rating mentioned below in the existing board and giving necessary connections.

63 Amp DP Isolator as per IS:13947 Part-III - 1993/ IEC: 60947 Part - III of Grade -I: Make : Legrand / L&T / GE / Siemens / Schneider/ ABB.

63 Amp FP Isolator as per IS:13947 Part-III - 1993/IEC:60947 Part-III of Grade-I: Make: Legrand / L&T / GE / Siemens / Schneider/ ABB.

Supply and fixing of Single pole / double pole / triple pole / four pole MCBs ISI mark of 'C' series 10 KA breaking capacity with the following current ratings mentioned below in the existing board and giving necessary connections.

6 to 32 Amps range S.P MCBs 10 KA 'C'/ 'D' Curve as per IS:8828 - 1996 / IEC:60898 - 2002 of Grade-I: Make: Legrand / L&T / GE / Siemens / Schneider /ABB.

Supply of the following sizes of LT XLPE insulated,1100 V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I).

25 Sq.mm 3 1/2 / 4 core LT XLPE armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) of Grade-II: Make: Finolex / Havells / Polycab / Gloster / Mercury / R PG / V-Guard / Paragon / KEI / Suncab.

Supply and fixing of the following sizes of concealed T.W. boards in the wall with 3 mm thick laminated sheet of white or approved colour on top fixed with brass screws, cup washers. The T.W. board will be with bottom plank 1/2'' thick and frame should be 1'' thick planks and painting with wood primer.

12''x8''x2 1/2'' with max. 2 joints concealed T.W. Board with 12.5''x8.5'' Laminated sheet 3 mm thick ISI mark

8''x6''x2 1/2'' with max. 1 joint. Concealed T.W. Board with 8.5''x6.5'' Laminated sheet 3 mm thick ISI mark

6''x4''x2 1/2'' with max. 1 joint. Concealed T.W. Board with 6.5''x4.5'' Laminated sheet 3 mm thick ISI mark

Supply and run of ' 8 ' SWG Copper wire for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" Brass Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and transportation of 60W LED Street light Luminaire made of pressure die cast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 110 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips (Green line) / GEVenture / Crompton (Hawk) / Bajaj (Edge +) /Halonix (Lumos - Super) / Havells (Endura Pearl)/ Capart (Premium)/ Keselec/ HPL/ Jaquar b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almounard / Havells Turbo Force/ Halonix Krypton

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded lluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. a) LUMINAIRE MAKE : Pasolite / Cosmo / Siger/ Koncept/ Kiran/ Vibrant/ Leo/ ilite b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT

Laying of U.G cables upto 50 Sq,mm and back filling of trench including labour charges etc., complete.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS:13032 with IP-43 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete of Grade-I: Make: Legrand / L&T / GE / Siemens / Schneider / ABB

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 2.5 Mtrs length after excavating an earth pit of size1.5 m X 0.9 m X 2.55 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.65 m) with the following specification:-

(a) the GI pipe shall be inserted into the Ground for 2.25 M below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) the excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) the top 0.25 m of GI pipe shall be exposed into inspection chamber of 0.40 X 0.40 X 0.40 m internal size . The all around inspection chamber shall be provided with 0.1 m thick CC (1:2.5:5) walls with 20 mm thick HBG metal such that the pit shall be exposed 100 mm above ground level. The bottom of the inspection chamber shall be provided with 100 mm thick CC (1:2.5:5) using 20 mm HBG metal with 200 mm outer offset at all four sides. (d) All the inside & outside exposed faces of the inspection chamber shall be plastered with CM (1:3) 12 mm thick.

(e) A 65 mm dia PVC conduit is to be embedded through 100 mm thick wall at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) The top of the 40 mm dia GI pipe shall be welded with reducer of 20mm dia connected with 20mm dia of 0.3 long GI pipe and 20 mm GI pipe is to be fixed with funnel & wire mesh.

(g) After giving earth connections to the 25 X 6 mm GI flat with bolts, nuts & washers, a pre-casted RCC (1:2:4) slab cover of 40 mm thick with lifting hook is to provided on top of the Earth pit. (h) Necessary Meggar testing is to bo done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint.

Supply and fixing of thermo plastic box single/double street light fittings of size 330 X 230 X 120 mm made with thermo plastic pole box of Hensel/sintex make of IP65 protection with door consisting 6mm hylen sheet,4nos brass,bolts& nuts and washere has to be fixed to the pole above and with necessaryback clapm(1'' X18MS flax) and 1X1/8 GI bolt & nuts and washeres as directed during execution.