TENDER FOR RENOVATION OF IOB BUILDING

Amount

Civil Work

Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.88% and conforming to IS :15622 of approved make , in all colours and shades, laid on 20mm thick cement mortar1:4(1cement: 4 coarse sand), including grouting the joints with white cement and matching pigments etc,complete.Size of tiles600x600mm

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.One or more coats on old work

Electrical work

Earthing with GI earth pipe 4.5 metre long , 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Supply and drawing bare eathing conductors of the following sizes along with wiring/cables and giving connection as required 6.00mm copper conductor(4 SWG)

supply and fixing of following ways surface /recess mounting, vertical type, 415volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's(but without MCB's and incomer) as required.(note: Vertical type MCB TPDB is normally used where 3 phase outlets are required)8 way(4+24), Double door

Supplying and fixing following 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker sutable for inductive load of following poles in the existing MCB DB complete with connections, testing and commossioning etc. required. Single pole

Supply and fixing following rating ,four pole, (three phase and neutral),415 volts, residual current circuit breaker(RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections,testing and commissioning etc.as required 25 amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complte with connections,testing and commissioning etc.as required 40 amps

Wiring of light point / fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm .FRLSPVC insulated copper conductor singlr core cable etc as required.Group C

Wiring of circuit/submain wiring along with earth wire with following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x1.5sq.mm+1x1.5 sq.mm earth wire.

Wiring of circuit/submain wiring along with earth wire with following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x2.5sq.mm+1x2.5 sq.mm earth wire.

Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .20mm

Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc . As required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc.as required.(For light plugs to be used in non residential buildings).

Surface mounting decorative fluorescent tube light fitting complete with lamp with complete accessories duly wired up for use on 230 V AC. Surface mounting LED 20W LED batten with out put 2000 lumen for use on 250V AC supply.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve ,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required . Triple pole.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface /recessed steel /PVC conduit as required. 3x4 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface /recessed steel /PVC conduit as required. 3x2.5 sq.mm

Supply and fixing of 12W LED bulb with angle holder

Supply and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp swich.

Supply and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket out let .

Supply and fixing of 1200mm Ceiling fan.

Labour charges for Dismantling of Existing MSB, SSB, COS, DBs Light, Fan, conduit wiring and factory inside over head lines etc.

AJ CONSTRUCTIONS (BID ID -2211887)

Ray Electricals (BID ID -2211879)