Supply, Installation, Commissioning and testing of List of Machinery with specification for Various Trades of Govt. ITI Purulia as per Tender Schedule L

Schedule- L, Machinaries of Various trades

Circle cutting machine 300 mm dia

Combination Turning up and wiring machine

Muffle Furnace (electric ) Material loading capacity- up to 100kgs Melting material- Aluminium or copper. Max. operating temperature- 500° - 1000° C Power source- Electric Type of Furnace- Fixed

Oil fired tilting type crucible furnace Melting capacity- 100 kgs Material loading capacity- 500 kgs Heating method- Oil fired Metal type- Copper

Gravity die casting machine Type of machine- Die casting machine Die locking force- 1.5 Ton Power- 2HP Automation grade- Automatic Material- MS Machine type- Aluminium pressure Voltage- 220 Volt Maximum bending angle- 100 mm

USG testing machine

Air conditioned CRDI Vehicle in running condition -LMV *Drive Type: Rear Wheel Drive *Clutch and Clutch operation type: Diaphragm Type with Hydraulic operated *Ground Clearance: Above 150mm *Steering Type: Power Assisted (Hydraulic or Electric) *Turning Radius: 4.8 to 5.8 meter *Wheel Size Radius: 15 inches *Seating Capacity: 6 + 1 *Air Condition *Air Bag at Front *Antilock Braking System (ABS) *Power Window: Front and Read *Front Brake Type: Disc *Rear Brake type: Drum or Disc *Front Tyre Type and size: Radial 215 / 75 R16 Tubeless or Tube Tyre *Rear Tyre Type and size: Radial or Cross ply 215 / 75 R16 Tubeless or Tube Tyre *Digital Dash Board *Safety Seat Belts for front and rear *Company Fitted Center locking feature. *Rear view mirror both side *Fuel Tank Capacity 40 liter and above.

Working Condition of E.V (Electric Vehicle ) Car Electric car with all required accessories including battery charger .The unit must be an actual, working electric vehicle, capasity atleast 4 seaters that demonstrates all basic operations, including driving and charging, to allow for practical diagnostics, servicing, and repair exercises.

Hydraulic Trainer Kit, each consisting of the following matching components and accessories:I. Hydraulic Power pack with, (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 – 60 bar, (3) oil reservoir, ≥5 litres capacity having sight glass, drain screw, air filter, and P and T ports. - 1 No. II. Pressure relief valve, Pilot-operated - 1 No. III. Drip tray, steel, Size 1160 mm x 760 mm.- 1 No. IV.Pressure Gauge, Glycerin-damped, Indication range of: 0 – 100 bars - 1 No. V. Four-Way distributor, With five ports, equipped with a pressure gauge - 1 No. VI. Double acting hydraulic cylinder, With a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm. - 1 No. VII. Suitable Weight, For vertical loading of hydraulic cylinder - 1 No. VIII. Mounting kit for weight, for realizing pulling and pushing load. - 1 No. IX. 3/2-way directional control valve, With hand lever actuation - 1 No. X. 4/2-way directional control valve, With hand lever actuation - 1 No. XI. 4/3-way directional control valve, Close centre position with hand lever actuation. - 1 No. XII. Non-return valve. - 1 No. XIII. Pilot-operated check valve, Pilotto open.- 1 No. XIV. One-way flow control valve, Withintegrated check valve.- 1 No. XV. T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1No.) - 2 Set. XVI.Hydraulic Workstation (as set) with Profile plate, (To be fitted onto the Hydraulic workstation), Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories. - 1 No.---- 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:, (1) Worktable – Size (Approx.) L1200mmXW900mmXH900 mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) L460mmxW495mmxH158mm each, and overall size of Drawer unit (Approx.) L470mmxW495 mmxH825mm and (3) Drawer slide height (Approx.) 85mm. - 1 No. Cut-section models for hydraulic components. - 1 Set. N.B :- All Valves/Components are properly mounted on work station and by suitable piping / cables with quick release Coupling (QRC). End fittings to construct various type of circuit. Installation, demonstrations and commissioning must be satisfactory.