SPECIAL REPAIR TO ROAD FURNITURE AND MARKING AREA OF AGE B/R-I ZONE A AREA UNDER GE (A) AHMEDABAD CANTT

Material and labour for providing and laying 1.5 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MoRTH specification including cleaning of roads surface,heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

Supply and fixing Cats Eye of plastic body size not more than 130 mm and height not more tham 20mm, made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road, complete all as specified and diretced. (Make: Avery Dennison/Dark eye)

Material and labour for metal road delineators made out of 50 mm bore medium grade powder coated MS pipe of heavy weight not less than 1500 gms and total height of MS pipe should not be less than 1000mm. Delineators should be consisting of min two high performance 100 mm dia reflected and two 70mmX 23 mm rectangular reflectors to fixed on both side of delineator. Delineator should be embedded in earth with PCC 1:2:4 using 20 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair speed bumps made of heavy duty togh rubber of size 350mmX250mmX53mm weight 1.2 Kg approx colour black and yellow as per manufacture instruction complete all as specified and directed. (Make: Dark eye Model No-DA74 or equivalent)

Preparation of old external treated surface of concrete/Kerb Stone surfaces, facias, carnices etc by removing all scale,loose material dust etc & applying one coat of weather proof anti fungal (Apex) paint applied as per manufacturer instruction complete all as specified and directed at site.

Supply and fixing in repair solar road stud having 3 LEDs of colour red/yellow to a side (total 6 Nos.) housed in a tough pressure casted aluminium alloy of size 125X125mm with built in stem of suitable length for fixing with epoxy. LEDs, solar-cells, 1600 mAh battery & light sensor well procted inside under though unbreakable polycarbonate transparent sheet roof. System workable for 2-3 days (night) after full charge in 8-10 hours. complete all as specified and directed. (Make: Avery Dennison/ Dark eye/3M)

Taking down old sign board of any desription including frame work old unsearviceable/damaged road furniture items likes solar studs, cat eyes, delenators of any dimensions etc. complete all as specified and directed.

Supply and fixing with stainless steel frame including necessary clamps etc. retro-reflective double sided road name signboards comprising of 4mm thick aluminum composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro- reflective sheet and electro cut coloured overlay film. The aluminum composite panel (ACP) shall have a thickness of 4 mm with 0.5 mm thick skin of aluminium on both sides. The ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with shelf taping SS screws 5 mm dia spaced not more than 300mm center to center ensuring that no riveting is seen on either face of the frame. On the front and back of the ACP,micro prismatic retro-reflective sheet conforming to type-XI of IRC :67:2012 shall be pressure fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message. The rate shall include all materials, labour,equipments, fabrication, transportation, erection ,installation and incidentals all complete as per direction of the Engineer-in-Charge. (Note: Stainless steel frame shall be measured and paid saperatly)

Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels,plates etc., including welding , grinding,buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories & tainless steel dash fasteners,stainless steel bolts., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.