RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Wheeled Skid Steer Loader ( 1 ) ( Under PAC ) Make gamzen Model gamzen&5050 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Self Propelled wheeled machine which has front- mounted equipment primarily designed for loading operation (bucket use) and which loads or excavates through Yes Yes 1/8 forward motion of the machine Conforming to IS/ISO 7131: 2009 Yes Yes Make Gamzen * Model Number 5050 * Type of loader Wheeled Wheeled Attachment backhoe backhoe
Requiredmulti-purpose bucket Ignition type Diesel Diesel
RequiredSpark-Ignition Aspiration Naturally aspirated Naturally aspirated
Requiredmechanically supercharged
Requiredmechanically turbocharged Number Of Cylinders 4 Any applicable numeric value bore (mm) 90 Any applicable numeric value stroke (mm) 95 Any applicable numeric value displacement (cc) 2607 * Net flywheel power at given engine speed (hp) 48.67 Any applicable numeric value Maximum Engine torque (Nm) 155 Any applicable numeric value Engine cooling system Liquid cooled Air cooled
RequiredLiquid cooled Type of fuel Diesel * Engine location Rear * Drive system All-wheel drive Front-wheel drive
RequiredRear wheel drive
RequiredAll-wheel drive Emission Complaince BS III BS III
RequiredBS IV Gross Power (hp) 50 Any applicable numeric value Operating Weight (Kg) 2680 Any applicable numeric value Arm lifting force 19.3 Any applicable numeric value Operating Speed (kmph) 11 Any applicable numeric value Maximum Speed (kmph) 11 Any applicable numeric value 2/8 Operating Load Rating 2680 Any applicable numeric value Wheel Base (mm) 1045 Any applicable numeric value Ground Clearance (mm) 174 Any applicable numeric value Operating voltage (Volts) 12 Any applicable numeric value Alternator Supplied Amperage (Amp) 90 * Operating mass (kg) 2680 Any applicable numeric value Shipping Mass (kg) 2680 Any applicable numeric value Certification Parameters Vehicle Certification ARAI/VRDE/ICAT Yes Yes
RequiredNo If No
Requiredmention the name of Vehicle Certification agency ICAT CERTIFICATE * Vehicle Certification name and date ICAT/CEA/00115.05.12 * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes Yes Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes Yes Responsibility of Registration with RTO Yes Yes IS 11114 : 2006 Earth-moving machinery - Definitions of dimensions and codes: base machine Yes Yes IS 11114 : 2006 Earth-moving machinery - Definitions of dimensions and codes: Equipment Yes Yes 3/8 and attachments IS/ISO 6165 : 2012 Earth moving machinery - basic types - Identification and terms and definitions Yes Yes IS 13116 : 2006 Earth-moving machinery -Engine Test Code - Net power Yes Yes ISO 3450: Earth Moving Machinery -Braking systems of Rubber-tyred machines -Systems and Performance requirements and test procedures Yes Yes IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes Yes Constructional Parameters Overall length with attachment 3270 * Overall operating height 3870 Any applicable numeric value Bucket capacity 500 * dump angle (degree) 42 * dump height 2236 * maximum dump height when clam open 2236 * maximum dump height when clam closed 2236 * Maximum dump height
Requiredside 2236 * Rollback (specifiy height) 2970 * Maximum rollback at ground 23 * carry position 0 * maximum rollback at carry position 0 * Minimum turning radius with bucket in carry position 1958 * digging depth 0 * 4/8 bucket width 1690 * maximum grading angle 23 * Operating load 850 Any applicable numeric value breakout force 12250 * machine clearance radius 174 * TURNING RADIUS FROM CENTER - MACHINE REAR 1958 * TURNING RADIUS FROM CENTER - INC BUCKET 1490 * Type of transmission hydrostatic Manual shift with flywheel clutch
Requiredpowershift with torque converter
Requiredhydrostatic
Requiredelectric Number Of forward speed 2 * Number Of Reverse speed 1 * Maximum forward travel speed (kmph) 11 * Maximum reverse travel speed (kmph) 11 * Hydraulic pump system type Gear Type * Hydraulic pump flow at given pressure (l/h) 3200 * Hydraulic pump flow at given speed (l/h) 3200 * Maximum normal hydraulic system operating pressure 25000 * Hydraulic system fluid capacity 36 * Type of filteration system DROP MICRON * Type of final drive HYDROSTATIC * Type and actuation system of the service brake HYDRO STATIC LEVER * Type and actuation system of the parking brake HYDRO STATIC LEVER * 5/8 Type of Driving Axle Hydrostatic Fixed
RequiredOscillating
RequiredBevel gear and pinion
RequiredDifferential
RequiredTwo-speed
RequiredHydrostatic
RequiredPlanetary Final drive Steering system All-Wheel Steer Front-Wheel Steer
RequiredRear Wheel Steer
RequiredAll- Wheel Steer
RequiredArticulated Steer
RequiredWheel-skid Steer Type of tyre STANDARD * Size of tyre 10 x 16.5 * Tyre tread STANDARD * Tyre Ply rating 10 * Rim Size 16.5 * Fuel tank capacity 65 Any applicable numeric value cooling system fluid capacity 11 * hydraulic tank fluid capacity 36 * Engine crankcase capacity 9 * final drive case capacity 20 * pump drives capacity 7.5 * Height to hinge pin
Requiredfully raised 2970 * Overall operating height when fully raised 3870 * Maximum scarifier lift height 0 * Performance Parameters Net Engine Power 48.67 Any applicable numeric value Tipping load at maxiimum reach (KN) 1680 Any applicable numeric value Lift capacity to maximum height 2970 Any applicable numeric value Rated operating capacity 850 Any applicable numeric value Breakout force 12250 Any applicable numeric value raising time 2.55 Any applicable numeric value 6/8 Lowering time 2.4 * Dump time 2 * Maximum travel speed (kmph) 11 Any applicable numeric value Braking performance 0 * Turning radius 1958 * Warranty time 12 Any applicable numeric value Operating hours during warranty period 1000 Any applicable numeric value Battery warranty 12 Any applicable numeric value Number Of Free services 3 Any applicable numeric value Transportation charge (Rs) 0 * Maintenance cost for first 5000 Hrs 300000 * Self-propelled crawler machine which has front-mounted equipment primarily designed for loading operation (bucket use) and which loads or excavates through forward motion of the machine Yes * * Bold specifications are the golden parameters.
