REPAIR MAINT TO FLOORING ROOF PLASTERING TILING AND PERIODICAL SERVICES AT CIW CIF OTM MD ACCN AT BEG AND CENTRE ROORKEE IN AGE BR II UNDER GE ROORKEE

Amount

Dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillets and removal from site for taking into schedule of credit complete all as specified and directed.

S&F 6 mm thick Designer Non asbestos fiber cement building board of size 60 cm X 60Cm fixed or laid inserted to GI frame work using main tee of size 24 X 38 X 0.5 mm and cross tee 24 X 28 X 0.5 mm made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24xx24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, suspended with GI wire 4 mm dia and upto 2 mtr long complete including plugging in brick walls/concrete surface with steel rawl plugs @ 600mm C/C complete all as specified and directed.

Dismantling of stone slab or tiles any thickness in floors, aprons etc laid, bedded and pointed in any mortar and M&L for machine cut Kota stone slab 18-20 mm thick, laid over and including 20mm thick screed bed in cement mortar (1:6) using coarse sand as in flooring, set & jointed in neat grey cement slurry and ponted in white cement mixed with pigment to match including grinding and polishing to granite finish complete all as specified and directed.

Dismantling of stone slab or tiles any thickness in walls/vertical surfaces etc laid, bedded and pointed in any mortar and M&L for machine cut Kota stone slab 18-20 mm thick, laid over and including 10mm thick backing coat in cement mortar (1:4) as in vertical surfaces, set & jointed in neat grey cement slurry and ponted in white cement mixed with pigment to match including grinding and polishing to granite finish complete all as specified and directed.

Dismantling of stone slab or tiles any thickness in floors, aprons etc laid, bedded and pointed in any mortar and M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors/pavements and pointed in white or coloured cement to match including 20 mm thick screed bed in cement mortar (1:6) using coarse sand complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc and M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc and M&L for 12mm thick rendering in cement mortar (1:4) using coarse sand on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specifed and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and M&L for non skid joint free coloured ceramic tiles 7-8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, laid in flooring over & including 15mm thick screed bed in cement mortar (1:6) using coarse sand, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and M&L for glazed ceramic coloured tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick, laid in vertical surfaces over & including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down chowkhat or frame with shutters ( (without taking off shutters from the frame wooden/steel) exc 1.5 Sqm but n.exc 4 Sqm complete all as specified and directed.

Taking down chowkhat or frame with shutters ( (without taking off shutters from the frame wooden/ steel) n.exc 1.5 Sqm complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges, steel handles and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.

All as per Sl item No. 15.00 above but without glazing bars.

S&F steel ventilator with top hung shutter including hinges, steel handles and steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors , ladders, framed balusters, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 3.0 mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in cement mortar (1:6) using coarse sand confirming to IS 2116-1980 complete all as specified and directed.

S&F factory made solid panel PVC shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either sides as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tubes, fixed in opening as per specification complete all as specified and directed

S&F PTMT But hinges 100 mm make 'PRAYAG' complete all as specified and directed.

S&F PTMT Tower bolt 200mm make 'PRAYAG' complete all as specified and directed.

S&F PTMT door handles 125mm make 'PRAYAG' complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in half brick thick walls built in cement mortar (1:4), straight or curved on plan to any radius complete all as specified and directed

M&L for 10mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based material surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specifed and directed.

S&F IInd class HW, factory made 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifed and directed.

S&F 30 mm thick factory made flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauze etc (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc sizes of members of shutter as specified in SSR-2009 Part I section 8 clause 8.24 (a), supplied and fitted to chowkhat complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm size, medium weight , having flap size 100 mm X 58 mm X 1.90 mm thick and dia of hinge pin 5.6 mm fixed with 8 nos stainless steel screws as per IS 12817 of 2013 complete all as specified and directed.

S&F 200 mm size Stainless steel barrel tower bolt, with width of barrel 33 mm and thickness 0.70 mm having dia of bolt 10 mm as per IS-15833 of 2009 complete all as specified and directed.

S&F 300 mm size Stainless steel sliding door bolt, hasp & staple type with 16 mm dia rod, for use with Pad lock, with and including minimum 06 nuts and bolts, 4 on bolt plate and two on staple plate as per IS-15834 (2008) complete all as specified and directed.

S&F 150 mm Stainless steel handles fabricated type bright finish having metal thickness 3 mm complete fixed with 4 nos stainless steel screws complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed

Demolition of mud phuska in roofs, any thickness including plasterings and leeping (wheather full thickness removed or only a part thereof) including cleaning of roofs etc complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in padding/ mass concrete using water proofing compound complete all as specified and directed.

M&L for screed bed 10 mm thick in CM 1:4 using coarse sand (mixed with WPC) on concrete surface of roof finished fair and even before application of APP on roof treatment complete all as specified and directed.

M&L water proofing treatment with following specification :- (a) M&L wire brushing and cleaning top surface of cement concrete including flashing and junction of parapet etc including applying priming coat using with primer conforming to IS 3384- 1985 @ 2 Kg per sqm. (b) M&L APP based polymeric membrane minimum weighing 3.60kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application with side laps & joints over laps etc as per manufacturer instruction or as specified in SSR Pt-1.complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on bedding layer in 15 mm thick in cement mortar 1:4 using coarse sand and joints grouted flush and pointed in cement mortar (1:3) complete all as specified and directed.

All as per serial Item No. 43.00 above but with serviceable tiles obtained from item No 38 complete all as specified and directed.

M&L for 15 mm thick rendering on brick or concrete surfaces in cement mortar 1:3 mixed with 2% WPC over roof slab complete all as specified and directed.

Dismantling asbestos cement corrugated and semi corrugated sheet in roof and removal from site for taking into schedule of credit complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof covering or wall cladding etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F asbestos cement two piece adjustable serrated ridge for corrugated/semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and directed..

S&F 0.50 mm thick pre-painted galvalume zinc coated GI based corrugated /semi-corrugated sheet of any colour having tensile strength of 550 Mpa, fixed as in roof covering/cladding to wall with self tapping screws complete all as specified and directed.

S&F 0.50mm thick pre-painted galvatume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, fixed as in roof covering/ cladding to wall, ridges etc with self tapping screws complete all as specified and directed.

Dismantling framed timber scantling etc 40 Sqcm and over in section in any position complete all as specified and directed.

S&F second class hardwood plain, straight Truss/Purline/Rafter/chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Demolition of reinforced cement concrete of any description in ground floors and pavings n.exc 15 cm thickness (below or above ground level) including cutting reinforcement (if required) to facilitate demolition complete all as specified and directed.

M&L for form work to soffits of suspended slab such as roof slabs, shelves, platform ,floor slabs and similar work n.exc 200 mm thick (horizontal or sloping) for rough finished flat concrete surfaces complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams, columns and chajjas and the like complete all as specified and directed

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, hooking ends, bending spirally for hooping for columns, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

Hacking out old broken glass from wooden frame etc, glazed with oil putty or fixed with wooden beading and S&F 3 mm thick plain sheet glass ordinary quality, fixed in squares n.exc 0.50 Sqm each pane including providing necessary wooden beading, oil putty to metal frame complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or steel wire staples complete all as specified and directed.

S&F in repairs drapery rod 20mm dia fancy type mild steel, chromium plated with fixing brackets, stops including knobs, brackets and fixed in any length complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position of capacity 500 ltrs incl 20mm PTMT ball valve (Ball valve make:- prayag) all as specified in SSR Pt-I. including dismantling of unserviceable tank and removed from site for taking into schedule of credit complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S&F in repair 15 mm bore PTMT ball valves, high pressure, with polyethylene float and fly nut with epoxy coated Aluminium rod screwed for iron pipe complete all as specified and directed. (Minimum weight 15mm-142gms)

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified and directed. (Minimum weight 20 mm - 210 gms)

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defence land complete all as specified and directed.

M&L for providing 50 mm thick cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in floor, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed. Note: The floor shall be laid in panels all as specified in SSR Part-I- 2009 (Specification)

M&L for providing 75 mm thick cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base/levelling coarse complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Alankar Traders

SR CONSTRUCTIONS

M/S IRFAN AHMAD CONTRACTOR

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

nautiyalandcompany