Repair/ replacement of internal Electrification at Garhi Cantt and Beacher Road under AGE E/M-II under GE Dehradun.

Amount

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed. Note :- (i) The contractor/Supervisor collect the complaints from the JE/MCM through JOB Card and rectify the complaints. (ii) The contractor/Supervisor should submit the Job Card duly signed by the user. (iii) RAR/Final bill will be paid only after verifying of workdone by the Engr-in-Charge

Material and labour point wiring with 3 runs of 1.5 Sqmm (colour code as per IE Rules) FRLS, PVC insulated, unsheathed, single core, 1100 Volts grade, multistranded copper conductor cable/Wire in and including concealed rigid PVC conduit medium grade and green wire connected to common earth dolly, and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 2 here-in- before but one 3 pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 2 here-in- before but one 3 pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 2 here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed..

All as per Item No 2 here-in- before but One light point controlled with switch 2 way complete all as specified and directed.

All as per Item No 2 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 2 here-in- before but wiring drawing through Surface PVC conduit complete all as specified and directed.

All as per Item No 8 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 8 here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 8 here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 8 here-in- before but One light point controlled with switch 2 way complete all as specified and directed.

All as per Item No 8 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 2 here-in- before but wiring drawing through exisitng conduit complete all as specified and directed.

All as per Item No 14 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 14 here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 14 here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 14 here-in- before but one two way point controlled with switch 2 way complete all as specified and directed.

All as per Item No 14 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulate FRLS copper conductor complete all as specified and directed.

All as per Item No 2 here-in- before but wiring drawing through Case & Caping complete all as specified and directed.

All as per Item No 20 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 20 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 20 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 20 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

SSupply and fix in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fix in repair switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repair ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix in repair calling bell type AC 230 Volt single pole complete all as specified and directed..

Supply and fix Modular white cover plate with frame and metal flush box 2 module complete all as specified and as directed.

All as per item No 35 here in before but 3 module complete all as specified and directed.

All as per item No 35 here in before but 4 module complete all as specified and directed.

All as per item No 35 here in before but 6 module complete all as specified and directed.

All as per item No 35 here in before but 8 module complete all as specified and directed.

All as per item No 35 here in before but 12 module complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 06 amp single pole complete all as specified and directed.

Supply and fix Modular switch 2 way 06 amp single pole complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 16 amp single pole complete all as specified and directed.

Supply and fix in repair modular socket outlet 6/16A- 5 pin combined of 02 module complete all as specified and directed.

Supply and fix in repair modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed.

Supply and fix in repair moduar bell push 6 Amp 1 module complete all as specified and directed.

Supply and fix in repair modular fan step regulator 120 W-2 module complete all as specified and directed.

Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed.

Supply and fix in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair decorative wall mounting light fitting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified and directed.

Supply and fix LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing.

Material and labour for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 52 here-in-before but with 3 runs(N+P+E) of 2.5 Sqmm single core copper FRLS conductor . Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

All as per item No 52 here-in-before but with 3 runs(N+P+E) of 4 Sqmm single core copper FRLS conductor .Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

All as per item No 52 here-in-before but with 6 runs(3 runs P+N+ 2 run Earth) of 6 Sqmm single core copper FRLS conductor and PVC conduit not less than 24 mm dia. Note:-6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

Material and labour for replacement of old rusted sunken box with new 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories and making the good disturbed surface with plastering and white washing etc incl taking downcomplete all as specified and directed .

Material and labour for replacement of old u/s hylum sheet cover fixed with brass screw complete with all accessories and making the good disturbed surface with plastering and white washing etc incl taking down complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair Distribution board VTPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in repair MCCB 415 Volts, 63 Amps, rating 4 Pole , complete all as specified and directed.

Supply and fix in repair MCCB 415 Volts, 100 Amps, rating 4 Poleall complete all as specified and directed.

Supply and fix in repair Distribution board SPN 8/12 Way double door, for mounting MCBs isolator, IP 43 protection complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in replacement MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specrified & directed.

Supply and fix in repair 415V 10KA 'C' curve MCB of TPN 40 to 100 Amps complete all as specified and directed.

Supply and fix in repair SP 6 to 32 Amps rating 240V, 10KA 'C' curve MCB complete all as specified and directed.

Supply and fix in repair SPN 25 to 63 Amps rating 240V, 10KA 'C' curve MCB complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply and fix in repair round shaped LED downlights of capacity 12 Watt suitable for fixing in false ceiling with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Note - The cut out dia of ceiling light should as per existing model only)

Supply and fix in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.(Note :- Sample to be collected from concerned JE/MCM)

Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, (Whit/warm white as per user equirement )220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

Supply and fix in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

Supply and fix Exhaust fan exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

Supply and fix in replacement Exhaust fan exhaust fan 150 mm PVC body made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metalic exhaust fan complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

Supply and fix in replacement BLDC Ceiling Fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed. Note :- Old fans shouldbe deposited to MES store yard

gurchan singh & sons.

M/s badrinath Traders

prabhawati shanti automobiles

PARADISE INFRA POWER COMPANY

Mohinder Pal and Sons

Bedi Refrigeration Works