MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL BUILDINGS IN SUBZONE-1 IN SOUTH WEST (ATHWA) ZONE, SURAT.

ITEM Qty. Per Amount

Part - A Demolition Work.

1 112A Demolition and disposal of unserviceable materials with all lead

(ii) Unreinforced cement concrete 0.00 609.26 C.M.

2 112 Demolition including stacking of serviceable materials with all

(i) RCC Work 25.00 1,110.75 C.M.

3 113 Demolition of brick work and stone masonry including stacking

of serviceable materials and disposal of unserviceable

materials with all lead and lift.

(i) On Cement Mortar 5.00 577.92 C.M.

4 114 Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift. 10.00 20.55 S.M.

5 Self.Ex Dismentling steel work including distempering and stacking the

pl. maerials with all lead and lift. 0.00 3.85 Kg.

6 115A Dismentling door, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraces, holdfasts and other

attacement etc. complete and stacking them within all lead and

(i) Not exceeding 3 Sq.M. in area. 30.00 197.09 Each

7 115B Dismentling door, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraces, holdfasts and other

attacement etc. complete and stacking them within all lead and

(i) Exceeding 3 Sq.M. in area. 30.00 263.90 Each

8 Self.Ex Dismentling wood work, wrought framed and fixed in frames

pl. trusses including stacking the materials with all lead and lift.

9 115 Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.

(A) Kota stone flooring and steps 100.00 50.11 S.M.

(B) Marble 10.00 50.11 S.M.

(C) Tiles flooring / Dedo 150.00 50.11 S.M.

(D) Granite flooring and steps 50.00 50.11 S.M.

10 Self.Ex Manglore tiles flooring

11 Self.Ex Dismentling PVC pipe, UPVC pipes, G.I. Pipes, C.I. pipes,

pl. G.S.W. pipes, A.C. and rain water pipes with fittings and

clamps including stacking the materials with all lead and lift. (for

any dia, of pipe) (For All Floor) 75.00 78.51 R.M

12 Self.Ex HDPE PVC Tank

13 116 Dismantling sanitary fittings like wash basin, w.c. pan Indian

and Europeans type, flushing tank etc. including stacking the

materials with all lead & lift. 30.00 425.93 Each

14 Self.Ex Sanitory fitting like bib tap, flush cock, pillar tap, angle cock etc.

pl. 25.00 50.50 Each

15 Self.Ex Removing existing water proofing material including stacking of

pl. serviceable materials and disposal of unserviceable materials

with all lead and lift 35.00 107.60 S.M.

16 Self.Ex Removing of Collapsible Gate

17 Self.Ex Removing of Rolling Shutter

pl. 0.00 101.00 Each

18 Self.Ex Stainless Steel

19 Self.Ex Aluminum section

20 Self.Ex Aluminum Partition

21 Self.Ex POP / Gypsum false ceiling

22 Self.Ex Dismentling barbed wire in fencing including making rolls and

pl. also including dismentling fencing posts including all earth work

concrete in base and making good the disturbed fround

stacking useful materials as directed and disposing as directed

and disposing of the unserviceable materials with all lead and

ITEM Qty. Per Amount

23 Self.Ex Dismentalling G.I. chain link fencing including making rolls and

pl. also including dismentaling posts including all earth work

concrete in base and making good the disturbed ground staking

useful materials as directed and disposeing of the

unserviceable materials with all lead and lift.

24 Self.Ex Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys,

pl. Gutters etc. stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (i) G.I. sheet

roofing. 0.00 50.11 S.M.

25 Self.Ex Dismentaling of sheet roofing including ridges, Hips, Valleys,

pl. Gutters etc. stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (ii) A.C. sheet

roofing. 0.00 56.79 S.M.

26 Self.Ex Paver block flooring

27 Self.Ex Kerb

28 Self.Ex Glass from ventilation

pl. 0.00 50.50 Each

29 Self.Ex Demolition of terrace including stacking serviceable materials

pl. and disposal of unserviceable materials with all lead and lift.

Self.Ex (i) Brick tile covering.

30 Self.Ex Dismentalling of Bombay type Railing including dismentaling

pl. posts making good the disturbed ground staking useful

materials as directed and disposeing of the unserviceable

materials with all lead and lift. 0.00 15.00 R.M

31 Self.Ex Refixing of old Bombay type Railing including cutting, welding

pl. etc comp... 0.00 25.00 R.M

32 Self.Ex Removing of All Scrap Material in tractor with hydraulic trailer

pl. and 8 Nos. Of labours from Campus Boundry 0.00 2,600.00 Day

Part - B Earthwork

33 90 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles)

& disposal of the surplus excavated soil as directed within a

lead of 50 M. For following diameter of piles.

34 Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc. Comp.

1 (A) With Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 0.00 123.13 C.M.

1 (B) With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 0.00 212.52 C.M.

35 14 Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer by ramming and

watering. 0.00 136.92 C.M.

36 13 Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete. 0.00 301.78 C.M.

37 126 Providing Rubble Pitching with hard stone of approved quality

in cement mortar 1:6 (1 Cement : 6 Coarse sand) including

leveling up ,Curing etc. complete excluding pointing

38 127 Providing and filling rubbles including hand packing and filling

interstices with quarry spalls behind abutments and between

returns as directed. 0.00 1,094.11 C.M.

39 Self.Ex Filling in plinth with sand under floors including watering

pl. ramming, consolidating and dressing complete 0.00 339.66 C.M.

Part - C Plain Cement Concrete Works

40 88A Providing & Laying C.C1:5:10 (1cement :5coarse sand :10

graded stone agg. 40 m.m Nominal size )& curing comp. excl.

cost of from work in :

(A) Foundation & Plinth 0.00 2,606.92 C.M.

41 88 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse

sand:8 graded stone agg. 40 mm nominal size) & curing comp.

excl.cost of form work in :

(A) Foundation & Plinth 0.00 2,769.69 C.M.

42 88B Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size)&curing comp. excl.

cost of form work in :

(A) Foundation & Plinth 0.00 3,095.25 C.M.

Part - D Reinforced Cement Concrete Works

43 3A Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

ITEM Qty. Per Amount

(A) Foundation, footing, Base of columns and Mass

concrete. 10.00 3,741.69 C.M.

44 5A Providing & laying ordinary cement con.1:2:4 (1 cement :2 sand

:4 graded graded stone agg. 20 mm nominal size) finishing

smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having c/s area up to 0.08 sq.mt 0.00 12,335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8,692.87 C.M.

(1) Having c/s area up to 0.08 sq.mt 0.00 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6,578.07 C.M.

45 2A Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in:

(A) Wall Caps/ Copings. 50.00 4,085.83 C.M.

46 3 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass

concrete. 15.00 4,250.50 C.M.

47 5B Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having c/s area up to 0.08 sq.mt 0.00 12,844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9,201.68 C.M.

(1) Having c/s area up to 0.08 sq.mt 0.00 9,102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 5.00 7,086.88 C.M.

48 5 Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg.

mm nominal size) finishing smooth curing etc. comp. Incl.. Cost

of form work but excl. Cost of reinforcement for R.C.C. Work in

(1) Having c/s area up to 0.08 sq.mt

(i) Ground Floor 0.00 12,844.32 C.M.

(ii) First Floor 0.00 12,885.28 C.M.

(iii) Second Floor 0.00 12,926.24 C.M.

(iv) Terrace (Third) Floor 0.00 12,967.19 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(i) Ground Floor 0.00 11,166.97 C.M.

(ii) First Floor 0.00 11,207.92 C.M.

(iii) Second Floor 0.00 11,248.88 C.M.

(iv) Terrace (Third) Floor 0.00 11,289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

(i) Ground Floor 0.00 9,201.68 C.M.

(ii) First Floor 0.00 9,242.63 C.M.

(iii) Second Floor 0.00 9,283.59 C.M.

(iv) Terrace (Third) Floor 0.00 9,324.54 C.M.

(1) Having c/s area up to 0.08 sq.mt

(i) Ground Floor 0.00 9,102.61 C.M.

(ii) First Floor 0.00 9,143.56 C.M.

(iii) Second Floor 0.00 9,184.52 C.M.

(iv) Terrace (Third) Floor 0.00 9,225.47 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(i) Ground Floor 0.00 8,174.41 C.M.

(ii) First Floor 0.00 8,215.36 C.M.

(iii) Second Floor 0.00 8,256.32 C.M.

(iv) Terrace (Third) Floor 0.00 8,297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

(i) Ground Floor 0.00 7,086.88 C.M.

(ii) First Floor 0.00 7,127.84 C.M.

(iii) Second Floor 0.00 7,168.79 C.M.

(iv) Terrace (Third) Floor 0.00 7,209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F

(i) Ground Floor 0.00 7,984.42 C.M.

(ii) First Floor 0.00 8,025.37 C.M.

(iii) Second Floor 0.00 8,066.33 C.M.

(iv) Terrace (Third) Floor 0.00 8,107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F.

(i) Ground Floor 0.00 7,396.96 C.M.

(ii) First Floor 0.00 7,437.92 C.M.

(iii) Second Floor 0.00 7,478.87 C.M.

ITEM Qty. Per Amount

(iv) Terrace (Third) Floor 0.00 7,519.83 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F

(i) Ground Floor 0.00 6,813.01 C.M.

(ii) First Floor 0.00 6,853.96 C.M.

(iii) Second Floor 0.00 6,894.92 C.M.

(iv) Terrace (Third) Floor 0.00 6,935.87 C.M.

(i) Ground Floor 0.00 9,982.37 C.M.

(ii) First Floor 0.00 10,023.32 C.M.

(iii) Second Floor 0.00 10,064.28 C.M.

(iv) Terrace (Third) Floor 0.00 10,105.23 C.M.

(i) Ground Floor 0.00 5,576.81 C.M.

(ii) First Floor 0.00 5,617.76 C.M.

(iii) Second Floor 0.00 5,658.72 C.M.

(iv) Terrace (Third) Floor 0.00 5,699.67 C.M.

49 5C Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc.

(i) Ground Floor 0.00 7,698.11 C.M.

(ii) First Floor 0.00 7,739.06 C.M.

(iii) Second Floor 0.00 7,780.02 C.M.

(iv) Terrace (Third) Floor 0.00 7,820.97 C.M.

(B) Vertical and horizontal fins

(i) Ground Floor 0.00 11,613.07 C.M.

(ii) First Floor 0.00 11,654.03 C.M.

(iii) Second Floor 0.00 11,694.99 C.M.

(iv) Terrace (Third) Floor 0.00 11,735.94 C.M.

50 36 Providing upto floor two level precast cement concrete jali or

grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone

aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete. (B) 40mm thick.

(i) Ground Floor 10.00 741.93 S.M.

(ii) First Floor 0.00 752.39 S.M.

(iii) Second Floor 0.00 762.85 S.M.

(iv) Terrace (Third) Floor 0.00 773.32 S.M.

Part - E Reinforcement Works

51 7 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.

comp. Upto G.L./P.L. 25.00 77.29 Kg.

52 7 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position

(i) Ground Floor 30.00 77.29 Kg.

(ii) First Floor 0.00 78.34 Kg.

(iii) Second Floor 0.00 79.39 Kg.

(iv) Terrace (Third) Floor 0.00 80.44 Kg.

Part - F Masonary Works

53 8, 9 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1-Cement : 6 -fine sand) (C) Fly Ash Bricks

(i) Foundation and Plinth 0.00 4,441.11 C.M.

(ii) Ground Floor 4.00 4,729.83 C.M.

(iii) First Floor 4.00 5,018.55 C.M.

(iv) Second Floor 4.00 5,307.27 C.M.

(v) Terrace (Third) Floor 4.00 5,595.99 C.M.

54 12 Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:4 (1- Cement : 4 - coarse sand ) (C)Fly Ash Bricks

(i) Foundation and Plinth 0.00 551.00 S.M.

(ii) Ground Floor 15.00 712.81 S.M.

(iii) First Floor 15.00 719.37 S.M.

(iv) Second Floor 15.00 725.94 S.M.

(v) Terrace (Third) Floor 15.00 732.50 S.M.

55 139 Uncoursed rubble masonary with hard stone of approved

quality in foundations and plinth in cement mortar 1:6 (1

Cement : 6 sand) including leveling up etc. complete. 0.00 2,586.61 C.M.

56 140 Pointing on Coursed stone masonary with cement mortar 1:3 (1

cement : 3 Sand) ---

(A) Flush Pointing 0.00 101.89 S.M.

(B) Ruled Pointing 0.00 105.24 S.M.

57 141 Pointing on Uncoursed stone masonary with cement mortar 1:3

(1 cement : 3 Sand) ---

(A) Flush Pointing 0.00 110.24 S.M.

(B) Ruled Pointing 0.00 114.25 S.M.

Part - G Plaster Works

58 15 Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

ITEM Qty. Per Amount

(A) For wall and similar surfaces

(i) Ground Floor 10.00 199.28 S.M.

(ii) First Floor 10.00 228.84 S.M.

(iii) Second Floor 15.00 258.39 S.M.

(iv) Terrace (Third) Floor 0.00 287.94 S.M.

(B) For ceilings &soffits of stairs

(i) Ground Floor 0.00 225.34 S.M.

(ii) First Floor 0.00 254.89 S.M.

(iii) Second Floor 0.00 284.45 S.M.

(iv) Terrace (Third) Floor 0.00 314.00 S.M.

59 16 Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

(i) Ground Floor 0.00 249.39 S.M.

60 19 20mm thick sand faced cement plaster on walls for height

more than 10 metres above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc.

(i) Upto G.L./P.L 20.00 347.42 S.M.

(ii) Ground to All Floor 35.00 347.42 S.M.

61 19B Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat

mm thick cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

(i) For All Floor 0.00 286.10 S.M.

62 19A Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick

cement slurry and apply roller horizontal as well as vartical ( two

times ) up to good quality and size of grain in elevation as per

directed by engineer incharge.

(i) For All Floor 0.00 324.00 S.M.

63 20 Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor 0.00 43.74 R.M.

64 20A Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.) 0.00 50.00 R.M.

65 Self.Ex Providing and fixing 150 mm wide, approved quality chicken

pl. wire mesh (FRP / PVC) at junction of brick work and RCC work

or two dissimilar surfaces, at all heights fixed by nails, rowal

plugs or tag by cement mortar 1:3 before applying the plaster,

including curing, scaffolding all complete as directed.

66 169 Providing & applyin Decorative natural stone texture Coat

Synthetic plaster consisting of crushed natural stone chips of

0.5 to 4 mm size in proper gradation, bonded with Synthetic

Resins, Adhesives and various additives and applied two coats

of 3 of 2.5 mm approximately.(RA- )

The basic Adhesive is an Aqueous Vinyl Acetate / Acryl ate Co-

Polymer Emulsion. The Acryl ate component polymerized into

the product, imparts goods flexibility to the coating. The Co-

Polymer emulsion is combined with other Chemical Compound

to give specific properties to the final coating. These chemicals

are designed to give fungus and bacterial resistance property

while in the drum, as well as to apply Coating. They also give

good application flow properties and cohesive finish, thereby

enabling the adhesive to penetrate into the substrate before

drying and form anchor like grip. The Additives also reinforce

coating, impart water resistance and increase the life of the

The specification demands that to maintain consistent quality,

the material is supplied in ready-mixed paste, packed in airtight

drums. In packed drums, the shelf life of the material will be at

least one year, if stored in cool dry place under cover.

Providing and applying of Resin Bonded. Ready Mixed Ready

to Use Decorative natural stone Textured Coating of approved

shade and color. Dry film of the average thickness of 3 mm of

mm on recommended plaster specification; to perfect line,

level, plump including finishing with sharp edge at corners,

niches etc. all as per manufacturers recommendations and

specification including all labor materials, scaffolding and

surface preparation etc. Complete as specified in drawing and

as directed by the Engineer-in-charge.

(i) For All Floor 250.00 1,856.10 SM

Part - H Water Proofing Works

67 89C Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps

etc.with cinder or fly ash as directed by Engineer in charge

etc. comp.. 80.00 500.00 C.M.

ITEM Qty. Per Amount

68 89A NOTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years given on

a prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,kitchen

and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with

water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further

(c) Finishing top with stone aggregate 10mm to 12mm nominal

size spreading @0.008 C.M./S.M., thoroughly embedad in

plaster layer. as per specifications & instructions of Engineer in

charge (Cement consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement :

5 Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645 ,brick bats is finally covered

by jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 & top

smooth finished with trowel with false chequered marking of

300 mm.size.The treatment is carried along the vertical surface

of the parapet & other adjoining wall up to height of about

mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness at

khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for

a minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of

120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

69 89B Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of

(a) I course of applying cement slurry 4.4 kg per sq.mt. mixed

with water proofing compound confirming to IS:2645 in

rcommended proportions.

(b) II corse of 20mm cement plaster 1:3 mixed with water

proofing compound in recommended proportion.

(c) III course of applying blown or / resideal bitumen applied hot

at 1.7 kg per sqm of area.

(d) IV course of 400mm micron th. PVC sheet. (Overlaps at

joints of PVC sheet should be 200mm wide and pasted to each

other with bitumen about 1.7 kg./ sqm.) 50.00 505.00 S.M.

70 Self.Ex Providing cement vata (10 cm x 10 cm size) quarter round in

pl. cement mortar 1:1 including neat cement finishing, watering

etc. complete. 100.00 24.28 R.M.

71 165 Supply and application of silane siloxane based water

Repellant treatment shall be of sunanda, Dow, GE silicon or

equivalent having specific gravity of 0.9 +/- 0.05 is to be applied

by brush or low pressure spray in Three coats at the rate of 8-

10Sqm per Lit. per coat over exposed concrete surface as

directed, with a minimum 5 year guarantee on stamp paper as

per precribed format for water repellancy of treated surface.

ITEM Qty. Per Amount

72 166 Providing & Applying Seven coat Water Proofing application

with 2 coats of NCL putty including net, 2 coats of Mx cool

Guard at 2 coats, 2 coats of Mx cooltop at 2 coats, 1 coat of

Transeal including surface preparation and crack filling as per

Mention in Method of application. SURFACE PREPERATION:-

Surface cleaning prior to start any application works including

removal of any existing loose materials on surface by physical

or mechanical means as necessary. PATCH WORK:- Patch

work of damaged surface by applying Kem bond SBR

conforming to ASTM C159-99 and Kem grout NS 2 conforming

to BS 1881 with polymer modified mortar of grout and SBR of

make CHEMBOND, Dr.fixit, sika or similar fiber if necessary.

CRACK FILLING:- Treatment of surface cracks by opening and

cleaning the cracks and filling with acrylic or pumpkin based

sealant of make CHEMBOND crack 51, Dr.fixit, crack x paste

or similar joint PU conforming to ASTM c920. WATERPROOF

APPLICATION:- Seven coat waterproof application with 2 coat

of NCL putty including net, 2 coats of Mx cool Guard with DFT

of 200 microns at 2 coats, 2 coats of Mx cooltop with DFT of

700-800 microns at 2 coats, 1 coat of Tran seal which acts as a

protective coat. 200.00 747.71 S.M.

Part - I Stone/ Flooring/ Tiles Works

73 Self.Ex Providing and laying precast terrazo tile 20mm thick

pl. white,black, white and black (or of the colour specified in

specification of tender item) marble chips of sizes upto 6mm

laid in floors, treads of steps and landings on a bed of 25mm

average thickness of Lime mortar 1:1.5(1-Lime putty :

coarse sand) or C.M. 1:6 (1:cement :6 - coarse sand) jointed

with neat cement slurry mixed with pigment to match the shade

of tiles including rubbing and polishing complete with precast

(A) Light shades using white cement 0.00 647.25 S.M.

74 44 Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick 60.00 1,019.39 S.M.

75 45 Providing and laying polished kota stone slab 25mm thick in

risers of steps, skirting, Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete.

76 46 Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels, in

flooring, treads of steps & landings laid on a bed of 12 mm.

Av. Th.C.M.1:3(1cement :3 sand) finished with flush pointing in

white cement etc.com. For all floors

77 47 Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting, risers of steps & dado on 10 mm. th.

C.M.1:3(1cement :3 sand) including necessary cement paste

for fixing and joined with white cement slurry etc. complete. For

all floors 0.00 932.02 S.M.

78 97 Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement. 35.00 960.42 S.M.

79 98 Providing and laying Ceramic tiles 6mm thick in skrting,

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

80 101 Providing & laying marble stone slab flooring over 20 mm.av.

base of C.M.1:6 (1 cement :6 coarse sand) & jointed with grey

cement slurry incl. rubbing & polishing comp. (A) Marble slab

81 102 Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick cement

mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid

and finished with flush pointing in white or colour cement

including rubbing and polishing complete. ( Basic Rate:-

82 103 Providing & laying granite slab 18mm thick in skirting, risers

of steps, dedo and pillars laid on 10mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing

in white or colour cement including rubbing & polishing comp..

(Basic Rate:-Rs.1347.46/S.M.)

83 Self.Ex Providing & laying granite slab 18mm thick in Window-Door

pl. seal Frame Etc laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement, including

rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

84 Self.Ex Labour Charges For Half Round Edge For Granite

85 Self.Ex Labour Charges For Quater Round Edge For Granite

86 Self.Ex Labour Charges For Edge Finished For Granite

ITEM Qty. Per Amount

87 Self.Ex Labour Charges For Half Round Edge For Kota/ marble

88 Self.Ex Labour Charges For Quater Round Edge For Granite

89 99 Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24"

For Antiskid tiles

90 99A Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement. 100.00 1,092.37 S.M.

91 100 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting, risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

cement slurry. 100.00 1,135.80 S.M.

92 99B Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36"

in flooring, treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement. 0.00 1,531.82 S.M.

93 100 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36"

in skrting, risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

cement slurry. 0.00 1,592.40 S.M.

94 41 Providing and laying chequered precast concrete tiles 22mm

thick with aggregate of sizes upto 6mm in floors, treads of

steps and landing on 20mm thick bed of C.M. 1:6 (1 cement :

6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 sand) jointed with neat

cement slurry with pigments to match the shade of the tiles.

95 79 Providing and laying rough chiseled dressed stone flooring

over 20mm thick base of cement mortar 1:5 (1 cement :

coarse sand) or L.M. 1:1.5 including pointing with cement

mortar 1:2 (1 cement : 2 stone dust) etc.

(A) 25mm thick 0.00 576.79 S.M.

96 Self.Ex Providing & Laying polished kota stone of machine cut edge

pl. patti of 10cm wide 22 mm. thk. in ramp flooring as per

design, laid on 10 mm. th. C.M.1:3(1cement :3 sand) including

necessary cement paste for fixing and joined with cement

slurry etc. complete. For all floors. 0.00 98.00 R.M.

97 Self.Ex Providing and filling Epoxy grout of approved or suggested

pl. brand by consultant / Engineer in charge in 4mm to 6mm thick

tiles joint including spacer with cleaning of joint by vacuum or

blower etc 0.00 40.00 R.M.

98 Self.Ex Providing and laying cement concrete flooring 1:2:4 (1

pl. cement : 2 course sand : 4 graded stone aggregate 20mm

nominal size) laid in one layer finished with a floating coat of

(A) 40 mm thick 0.00 319.03 S.M.

(B) 50 mm thick 0.00 374.14 S.M.

99 Self.Ex Providing and laying cement concrete pavement (25mm to

pl. 50mm thick) with 1:2:4 (1-cement : 2-coarse sand : 4-stone

aggregate 20mm nominal size) including finishing with

floating coat of neat cement complete. 0.00 3,825.22 C.M.

100 128 Providing and constructing sandwitch type Polish Kota Stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including one

end side Polish Kota stone (Double Polish) of 1.25 mt.

height & front Polish Kota stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

1:3 with finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp

as per instruction given by site in charge at all floors.

101 Self.Ex Providing and constructing sandwitch type Granite stone

pl. cooking platform 0.6 mt. wide & 0.75 mt. height, including one

end side granite stone (Double Polish) of 1.25 mt. height &

front granite stone patti of 10 cm wide, vertical partitions of half

B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing

smooth with cement slurry as required and Stainless Steel sink

of 0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction given

by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

102 80 Providing & fixing at all floor levels,both face polished

machine cut edge green kota stone slab (30mm) for urinal

partition joined with grey cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.) 0.00 900.00 S.M.

103 Self.Ex Providing & fixing at all floor levels,both face polished

pl. machine cut edge Marble slab for urinal partition joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.) (Basic Cost- Rs. 450/S.M.)

ITEM Qty. Per Amount

104 133 Providing & Fixing including making gisi & fixing at all floor

levels both face polished machine cut edge, granighte

stone slab for urinal partition joined with grey cement mortar

(1:3) incl. Rubbing & Polishing etc. Complete. Including half

round edge for granite.

(Basic Rate of Granite : Rs. 1200.00 / S.M.) 10.00 2,900.00 S.M.

105 142 Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm

along the wall clearing with water and oxalic acid etc. as

directed. 0.00 779.70 S.M.

106 143 Providing and fixing in position, 25 to 38 mm. thick acid and

alkali resisting Red Mandana stone of approved size and

shape, for flooring, skirting and dado, including two coats

of acid and alkali preventive primer, fixing on average

mm. thick cement mortar bedding 1:3 (1 part of cement and

part of coarse sand) with acid proof powder, keeping the joints

6 mm. to 10 mm. wide all around and filling the same with

epoxy resin and hardner, including hand/machine polishing,

wax polishing etc. complete, as directed.

107 138 Providing & Laying Commercial Quality white glazed tiles

6mm. th. in flooring laid on a bed of 20 mm. Av. Th.C.M.1:3

(1cement :3 sand ) & on wall Of R.C.C. Tank with necessary

cement paste for fixing and joined with white cement slurry etc.

complete. finished with flush pointing in white cement etc.com.

Part - J Furniture/ Wood Work

108 Self.Ex Providing & fixing 35mm.th. Flush Door Solid Double Core

pl. type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws

& Anodized aluminum fixtures & fastenings For all Floor

(A) Same as Above But Without Frame 0.00 2,520.00 S.M.

109 Self.Ex Providing & Fixing flush door shutters first class

pl. hardwood with crossband and faceveneer or plywood

face panels, teakwood edge bididng including anodised

aluminium butt hinges with necessary screws

(A) Non - decorative type and block board core

anodised aluminium butt hinges in flush door shutters:

(B) Decorative type with both side 1mm th. laminate

finish and block board core anodised aluminium butt

hinges in flush door shutters: 0.00 2,570.50 S.M.

110 Self.Ex Prov., Making & Fixing wooden Door with 4" X 2" teakwood

pl. frame using 06mm th. BWP plywood, 01mm th. laminate, 3" X

1.5" teakwood shutter, 5mm th. acid frosted glass, mortise lock

with ss D type mortise handle, 5" ss hinges, door closer &

necessary hardware materials etc. complete as per your

instruction and drawings details.

111 25 Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak wood

frames of finished size 12cm x 7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two

coats of oil painting etc. For all Floor

(A) Fully Panelled 10.00 5,533.68 S.M.

(B) Partly Panelled and Partely Galzed 10.00 5,185.03 S.M.

(C) Fully Galzed 0.00 4,836.39 S.M.

112 26 Providing and fixing 35mm thick shutters for Doors, windows

and clearstory windows including anodised alluminium butt

hinges with necessary screws.

(A) Indian teak wood. (i) Fully Panelled. 0.00 4,101.06 S.M.

113 Self.Ex Providing and fixing Sal wood frame 12 cm x 7 cm size

pl. including anodized fixtures and fastening etc. including primer

coat of approved quality and two coats of oil paint.etc complete.

(For all floors) 25.00 865.00 S.M.

114 Self.Ex Providing and fixing FRP FRAME size 125 x 65 mm and

pl. mm thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges &

fixtures. The whole FRP frame & shutter is to be water proof

weather proof,termite proof &resistance to mild acid/alkali.

Rates are to be inclusive of S.S.hinges with fastener sleeve &

alluminium fixtures & fastentings.

ITEM Qty. Per Amount

115 Self.Ex Providing and fixing FRP of 35mm thick Fiber Glass shutter

pl. with 1.5 to 2.0 mm thick fire retardent grade FRP skin in

depressed panel design having extra reinforcement on sides &

edges & in Gel coat finish. The core of the shutter is to be filled

up with injected retardent grade polyurethane foam done in situ

alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water

proof ,weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings.

116 Self.Ex Providing and Replace Door, Window S.S. Fixtures fix in

pl. wooden / Alluminium door - window

(A) S.S. Door / window hinges 4x1"x1" 10.00 64.64 No.

(B) S.S. Aldrop 20 Cm long of ASIS 304 Grade 15.00 257.55 No.

(C) S.S. Aldrop 25 Cm long of ASIS 304 Grade 10.00 386.83 No.

(D) S.S. Aldrop 30 Cm long of ASIS 304 Grade 10.00 472.68 No.

(E) S.S. Handle for door/ window 10 Cm size of ASIS

(F) S.S. Handle for Door 15 Cm size of ASIS 304 Grade

(G) S.S. Stopper 20 Cm long of ASIS 304 10.00 150.49 No.

(H) S.S. Stopper 30 Cm long of ASIS 304 10.00 215.13 No.

(I) S.S. Stopper 60 Cm long of ASIS 304 0.00 429.25 No.

(J) Door closers (Heavy type of 765 number) Hardwire or

Everite Prabhat or Equivalent. 5.00 555.50 Each

117 Self.Ex Reparing & Servicing of existing door/window including cost

pl. of hardware (Fevicol,Nail and NF screw etc.) but excluding

cost of fixtures as directed by Engineer in-charge.

(A) Wooden door 10.00 150.00 No.

(B) Partly Panelled and Partely Galzed alluminium door

(C) Wooden Window shutter 10.00 75.00 No.

(D) Alluminium Window shutter 10.00 75.00 No.

118 Self.Ex Providing & fixing door closer Ozon / Dorma / Hyper /

pl. Hardwin / Godrej / Alluminium body ISI brander equivalent

make with necessary hardware materials etc. complete as

per instruction by engineer in charge. 10.00 1,400.00 No.

119 160 Providing & Fixing floor spring make Hyper / Hardwin /

Godrej / Ozon / Dorma equivalent ISI make with necessary

hardware materials complete as per instruction by engineer in

charge. 0.00 2,861.50 No.

120 Self.Ex Providing & fixing water proof plywood (ISI marks 710 grade)

pl. at the door,window and any space in the building.

necessary hardware,screws materials etc. complete as per

instruction by engineer in charge.

(F) 12 mm BSL partical board green or Equalent make

(G) 12 mm plan E board Evrest or Equalent make 0.00 470.00 S.M.

121 Self.Ex Providing & fixing laminated sheet 1mm thick suede finished

pl. as per approved make with & necessary adhesive,hardware

materials etc. complete as per instruction by engineer in

charge. 0.00 650.00 S.M.

122 Self.Ex Prov. & Fixing Laminated Door of Marble / wall storage

pl. shutter with teakwood frame using with 19mm th. BWP

plywood, 1mm th. SF laminate, teakwood edge biding, ss

handles, hinges, magnate, lock & necessary hardware,

serews materials etc. complete as per instruction by

engineer in charge. 0.00 4,995.50 S.M.

123 Self.Ex Providing & fixing Mortise lock body with 70mm cylinder

pl. (make godrej/ ozon/ inox) fix in wooden door with necessary

hardware materials etc. complete as per instruction by engineer

in charge. 5.00 1,500.00 No.

124 Self.Ex Prov. & Fixing D type SS Mortise handle fix in wooden door

pl. with necessary hardware materials etc. complete as per

instruction by engineer in charge. make Godrej / Ozon /

Inoxe 5.00 1,110.00 No.

125 Self.Ex Renovation of Laminated wooden storage using

pl. with Laminate, teakwood edge biding , Plywood &

necessary hardware materials complete as per instruction by

engineer in charge. 0.00 2,600.00 S.M.

126 Self.Ex Replacemets of M.S. office table parts ISI marks

pl. with necessary hardware, serews materials etc. complete as

per instruction by engineer in charge.

(A) 20mm th. BWP Plywood top with 1mm th. laminate &

teakwood edge bidding french polish finish. 0.00 2,100.00 S.M.

(B) Drawer locks 0.00 80.00 No.

(C) Foot rest 0.00 80.00 No.

(D) Hinges/ handles 0.00 80.00 No.

127 Self.Ex Repairing & Serviving of M.S. File storage using screws

pl. and necessary hardware materials complete as per instruction

by engineer in charge. 0.00 300.00 No.

128 Self.Ex Replacemets of M.S. file storage parts ISI marks

pl. with necessary hardware, serews materials etc. complete as

per instruction by engineer in charge.

(A) Locks 0.00 315.25 No.

(B) Handles 0.00 180.00 No.

ITEM Qty. Per Amount

129 Self.Ex Reparing & Servicing of wooden office table / file storage

pl. using screws and necessary hardware materials complete as

per instruction by engineer in charge. 0.00 200.00 No.

130 Self.Ex Replacement of wooden office table / file storage parts ISI

pl. marks with necessary hardware, screws materials etc. complete

as per instruction by engineer in charge.

(A) Drawer / shutter locks 0.00 250.00 No.

(B) SS 4" D Handles 0.00 80.00 No.

(C) Drawer channel 0.00 275.00 No.

(D) SS 3" heavy hinges 0.00 80.00 No.

131 Self.Ex Providing & Fixing 4mm th. Natural veneer as per approved

pl. make with & necessary adhesive, hardware materials etc.

complete as per instruction by engineer in charge.

132 Self.Ex Repairing & Servicing of existing revolving chairs

pl. with neccesry hardware materials complete with all respcts.

133 Self.Ex Replacement of Revolving chair parts ISI marks with

pl. necessary hardware, screws materials etc. complete as per

instruction by engineer in charge.

(A) P.V.C. moulded Hand rest 0.00 325.00 No.

(B) Hydraulic gas pump 0.00 550.00 No.

(C) Cushion sheet, back with fabric / rexine 0.00 1,850.00 No.

(D) Rubber castor / wheels 0.00 100.00 No.

134 Self.Ex Repairing of Planetarium and Auditorium chair with

pl. providing necessary hardware and welding as directed by

Engineer in charge. 0.00 70.00 No.

135 Self.Ex Providing & fixing wooden notice board with Righting

pl. laminated board finish using 12mm th. Back commercial

plywood approved make, 01mm th. SF finish

laminate,teakwood framing & necessary hardware

materials etc. inside and liping french polish finish complete in

all respects by engineer in charge complete.

136 Self.Ex Providing & fixing Green board on walls of 1.8mt.x1.2mt size

pl. made up to 18 mm th.ply (using IS 710 Marin ply) with 1 mm

thick outside green board & 0.8mm backside white laminate &

with good Quality of adhesive with appropriate fittings of

Alluminium fittings or teak wood bedding 65 mmx 50mm size,

rubbing & sanding comp., as per instruction of Engineer in

charge (M.R.) 0.00 5,195.00 No.

137 Self.Ex Providing & fixing White board on walls of 1.8mt.x1.2mt size of

pl. 12mm thick with appropriate fittings and Alluminium fittings

comp., as per instruction of Engineer in charge (M.R.)

138 Self.Ex Providing & Fixing simple 12mm thick commercial plywood

pl. (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal

partition, supported 2" x 1" framing with necessary french polish

hardware labour etc. as per site incharge instruction and as per

drawing 0.00 7,690.00 No.

139 Self.Ex Providing & fixing Glass Table Top using 08mm th.clear glass

pl. with crystal edge & necessary hardware materials etc. complete

as per instruction by engineer in charge. 0.00 1,350.00 S.M.

140 Self.Ex Prov. & Fixing Glass Table Top using 12mm th. Clear

pl. glass with chamferd edges & necessary hardware materials

etc. complete as per instruction by engineer in charge.

141 Self.Ex Providing & Fixing Panels -12mm thick Indian Gypsum

pl. panels of saint Gobin Brand, screwed to G.I. gram at

200mm c/c, frame G.I. frame fabrication with 60 X 26 X 0.5mm

perimeter channels as required, 155 X 5 X..55mm intermediate

channel at 1220mm c/c, 25 X 10 X 0.55mm ceiling angle at

1220 mm C/C, securely fixed soflit hangers at 1220mm c/c,

false ceiling angle shall not at more than 610 mm from

adjan wall connecting clips, etc, as required complete

as per manufacture specifactions, joints all joints of panels

field and finished with indian gypsum, jointing compound,

Joining Tapes, etc. Complete including scaffolding as

required complete in all respects by engineer in charge.

142 Self.Ex Prov. & Fixing E board flush partition with aluminium

pl. pipe frame using 2.50" X 1.50" Sq. tube aluminium pipe

Weight 0.650 Kg permt.), 09mm th. Plan evrest make

eboard & necessary hardware material etc. complete in all

respects by engineer in charge.

143 Self.Ex Prov. & fix. Wooden office table with all outer and all visible

pl. surface covered by 1mm th SF laminate finish using

18mm th. Vertical, horizontal and shutter, 12mm th. Back

drawer, 06mm th. Drawer bottom commercial plywood

approved make, 01 mm th. Sf. Finish laminate , teakwood

liping, brass hinges, SS handle, lock abco make drawer

chanel and powder coated key board, magnate &

necessary hardware materials etc. inside and liping french

polish finish complete in all respects by engineer in charge.

ITEM Qty. Per Amount

144 Self.Ex Prov. & Making Side Credenza using saras make

pl. commercial plywood, all outer and all visible surface covered

by 1mm th. SF Laminate using 18mm th. Vertical, horizontal

and shutter, 12mm th. Back drawer, 06mm th.

Drawer bottom commercial plywood approved make,

mm th. Sf. Finish laminate , 8mm th. Back painted glass top,

teakwood liping, brass hinges, SS handle, lock abco make

drawer chanel, magnate & necessary hardware materials

etc. inside and liping french polish finish complete in

all respects by engineer in charge.

Part - K Colour Work

145 106 Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall

surface to give an even shade over and & including a priming

coat of alkali resistance primer of approved brand after

throughly brushing the surface to give an even shade after

throughly brushing the surface free from mortar droppings and

other foreign matter and also including preparing the surface

even and smooth.

(A) Walls 55.00 75.84 S.M.

(B) Ceiling 0.00 84.37 S.M.

145A 106 .---do---- Extra Subsequant coat over above Item

(A) Walls 0.00 31.91 S.M.

(B) Ceiling 0.00 35.25 S.M.

146 Self.Ex Apply two coats of putty and two coats of primer of approved

pl. brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other matter and sand papered smooth.

147 35 C Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth. 50.00 83.36 S.M.

147A 35 C For every subsequent coat Extra over item no.128 0.00 35.41 S.M.

148 130 Distempering two coats on previously distempering wall

(without primer) with oil bound washable distemper of approved

brand & required shade on wall surface to give an even shade

after throughly brushing the surfaces clean of all grease, dirt

loose places of sceles & also including preparing the surface

even and smooth. 0.00 60.63 S.M.

149 35 Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter and

scoured with brushed fine steel wool, scrapers and sand paper

with ready mixed priming paint brushing red lead.

150 35D Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint, burshing

to give an even shade including cleaning the surface of all dirt,

dust and other foreign matters. 0.00 68.57 S.M.

151 Self.Ex Painting one coat (excluding priming coat) on Previously

pl. Painted steel and other metal surface with synthetic enemal

paint, burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

151A Self.Ex For every subsequent coat Extra over item no.132

152 Self.Ex Applying Priming coat over new wood & wood surface after

pl. & incl. preparing the surface by throughly cleaning oil grease

dirt & other foreign matter sand papering & knetting Really

mixed paint brushing priming for enamel.

153 Self.Ex Painting two coats (excluding priming coat) on New wood

pl. & wood based surface with enamel paint to give an even

shade & surface incl. cleaning of all dirt, dust & other foreign

matter. 0.00 92.87 S.M.

154 Self.Ex Painting two coats (excluding priming coat) on previously

pl. painted wood & wood based surface with enamel paint to

give an even shade & surface incl. cleaning of all dirt, dust &

other foreign matter. 0.00 47.44 S.M.

155 Self.Ex Polishing with french polished on New wood & wood based

pl. surface to give an even surface incl. cleaning the surface of all

dirt, dust & sand papered smooth incl. a cost of wood filler.

156 Self.Ex Polishing with french polished on previously polishing

pl. wood & wood based surface to give an even surface incl.

cleaning the surface of all dirt, dust & sand papered smooth

incl. a cost of wood filler. 0.00 73.34 S.M.

157 35A Painting two coats of enamel paint over priming coat

(including priming coat) on wall after removing entire surface

dirt, dust foreign matter & also incl. preparing the surface even

& sand papered smooth etc. comp.(M.R.) 0.00 90.00 S.M.

158 35B Painting two coats of enamel paint (Excluding priming coat)

over previously painted wall after removing entire surface

with even shade & surface after removing dirt, dust foreign

matter etc. comp.(M.R.) 0.00 60.00 S.M.

ITEM Qty. Per Amount

159 132 Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI Dulux

or Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces

of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae and flaking paint. This can be

achieved by brushing with a wire/ stiff coir brush, followed by

water jetting if required. Fill up all minor cracks and defects with

white cement and sand mixture in the ratio 1:3. For application

on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using

Apply a liberal coat of exterior acrylic primer and allow it to dry

for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint 0.00 82.00 S.M.

160 Self.Ex Providing and applying P.U polished of approve shade and

pl. color to the wooden safety door. Sand the surface thoroughly

with emery paper. Mix the PU Sealer base, hardener and

thinner in the recommended ratio.Apply two coats by spraying

and allow a recoating interval of 4hours. Sand before applying

every coat. Mix hardener and thinner in the recommended ratio.

Apply 2-3 coats to get the desired finish. Allow a recoating

interval of 3-4 hours and sand before applying every coat.

161 Self.Ex Polishing with P.U Matt Polish on New wood & wood based

pl. surface to give an even surface incl. cleaning the surface of all

dirt, dust & sand papered smooth incl. a cost of wood filler.

162 Self.Ex Providing and applying Stuco Texture paint

Part - L Aluminium Work

163 Self.Ex Providing and fixing window having extruded aluminum Colour

pl. anodized section frame main outer size 127mm x 38.10mm x

1.35mm @wt. 1.384kg/m, horizontal Four track member size

122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398

kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm

x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window.

(A) Same as above but Colour anodized 0.00 2,140.33 S.M.

164 125 Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 95 mm x 24 mm

x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x 31.75 mm x

mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical

member of size 92 mm x 31.75 mm x 1.50 mm (of jindal section

no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm

x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of

kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details

(A) Same as above but Colour anodized 0.00 1,591.87 S.M.

165 124 Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 63.50 x

x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x 1.29 mm (

of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member

of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947,

@ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with

5 mm thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete

(A) Same as above but Colour anodized 0.00 1,705.67 S.M.

166 Self.Ex Providing and fixing standared extruded of alluminium section

pl. of size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with

colour Powder Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete for Ventilation

ITEM Qty. Per Amount

(A) Same as above but Colour anodized 0.00 1,175.56 S.M.

167 Self.Ex Providing and fixing standared extruded of aluminium section of

pl. size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @ Wt.

0.471 Kg per mt) with Powder Coated alluminium frame with

mm thick transparent bronze colour tinted float glass as details

etc. complete for fix window.

(A) Same as above but Colour anodized 0.00 1,833.29 S.M.

168 Self.Ex Providing & fixing partly panel & partly glass Powder Coated

pl. Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x

mm having weight 1.158 kg. / R.M. shutter section having size

83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle

1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing

Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm

thick sheet glass in acid frogting and 12 mm thick prelaminated

sheet of Greenlam, Panama or archid make as approved by

Engineer-incharge including fixing brass pivot, handle, lock etc.

(A) Same as above but Colour anodized 0.00 3,237.00 S.M.

169 Self.Ex Providing & fixing Powder Coated Aluminium partly glazed

pl. and partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick

clear float glass of approved make including all other necessary

fittings and fixtures. Entire work will have to be made water

proof using necessary rubber sectioned wherever required.

Gaps all round the frame to be filled with approved water proof

sealent. Bottom portion of doors both side to be covered with

12mm thick prelaminated particle board of approved make and

quality and as per design.

(A) Same as above but Colour anodized 0.00 2,400.00 S.M.

170 Self.Ex Dismentaling, Cutting & Refixing aluminium partition

pl. door Providing with necessary Hardware & Rubber gasket

etc. complete as per instruction by engineer in charge.

Part - M Iron & Steel Work

171 34 Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp.

(A) Plain grill For all Floors 0.00 109.41 Kg.

172 86 Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals

20 x5mm size with top & bottom rails of T-iron 40x40x6mm.

with 38mm dia. steel pulleys comp. with bolts, locking

arrangements, stoppers, handles incl. applying a priming coat

of Redlead paint etc. comp. 20.00 6,158.35 S.M.

173 40 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs curing,

layig including painting the exposed portion of loops, all as per

standard design complete. 0.00 135.47 Each

174 104 Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat

of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers

& the like. 0.00 91.08 Kg.

(B) For work like chain link fencing, above compound wall

(C.) in trusses & trussed purlins upto 25m.Span

&15m.Overall height 0.00 10.19 Kg.

175 Self.Ex Providing and Fixing Hollow steel Sections Framed Work

pl. including Cutting, Hoisting, Welding & Fixing in position Purlin,

Main Chord etc. as per Engineerin - charge.TATA / JINDAL /

ASIAN Make 0.00 126.00 Kg.

176 Self.Ex Providing & Fixing 3 mm thick metal sheet with CNC cutting to

pl. fix it on vertical surface.Steel work welded in built up sections,

framed work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint in beams & joists

channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams, hip & trussed purlins

connected to common raffers & the like.

177 107 Providing and fixing G.I. chain link of 50mm x 50mm size x

guage thick with nuts, bolts, washer or G.I. pins, excluding M.S.

angles etc.complete as per relevent IS specification & directed

by engineer in charge. (TATA or Jindal Make)

178 Self.Ex Providing and fixing and fitting TATA or Jindal make G.I.

pl. barbed wire fencing with necessary barbed wire (12 x

guage, weight not less than 0.14 kg. / mt.) pins, hooks,

excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge 150.00 125.00 Kg.

ITEM Qty. Per Amount

179 108 Providing and Fixing hot dip concertina coil of 610 mm dia.

made out of 2.59 mm (12 SWG) hot dip galvanized (G.I.

coating not less than 200 gm/sqmt.) th. wire having 80 nos. of

spikes and 200 nos. of clips made out of stainless steel (AISI

304) 1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I. coating not

less than 120 gm/sq.mt.) weight of one coil should not be lesss

than 15 kg. etc., complete at the top of compound wall fixed

with S.S. clips and binding wires whereever necessary etc.

complete. ( NOTE: Strctching length of one coil should not be

more than 9 mt.)

180 Self.Ex Providing and fixing 1.20 meter high fencing with 2.0 meter

pl. long M.S. angle post 40mm X 40mm X 6mm and oil painting

3 coats fixed at 2.5 mt.C/C. with five horizantal lines and

two diagonals of galvanised steel barbed wire of 'TATA

make' weighing 9.38 Kg.per 100 meter, strained and fixed to

posts with G.I. staples, including fixing posts in ground with

m X 0.5 m X 0.5 mt. block in C.C. 1:5:10 etc. comp.

181 Self.Ex Providing and fixing 20 mm x 20mm x 10 gauge thick (using

pl. TATA make G.I.wire) galvanise ironwire mess (G.I. Crimped

net) including cutting fixing etc.complete. 0.00 590.00 R.M.

Part - N Roofer Work

182 Self.Ex Providing & fixing colouron galvaniced steel, zinc /

pl. aluminium allus coated sheet 0.5 mm. thick roofing fixed

with gslvanised grom J or L hook bolts and bolt 8mm dia with

bituman and impet washer filled with white lead etc. Excluding

the cost of purlins rafter and trusses. (Tata / Jindal or

equivalent) 0.00 999.00 S.M.

183 109 Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter with

bitumen and G.I. limpet washer or G.I. limpet washer. filled with

white lead complete excluding the cost of purlins, Rafters and

(A) 0.63 mm thick sheet. (Tata / Jindal or equivalent) 0.00 1,016.00 S.M.

(B) 0.80 mm thick sheet. (Tata / Jindal or equivalent) 0.00 734.19 S.M.

184 110 Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x

3mm size bolts, nuts, washers etc. including marking necessary

connection with rain water pipes.

(B) 0.8 mm thick 0.00 581.32 R.M.

185 111 Providing ridges or hips 600mm over all in plain G.I. sheet

fixed with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I.

limpet and bitumen washer complete

186 96 Providing & Fixing UV stabilise FRP Sheet roofing with

overlapping the main cladding on both edges. All fixing holes

must be predrilled oversize as specified for the sheet length

and fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to ensure a

weatherproof seal but they must not be over tightened Side-lap

fasteners must also be installed at specified centers with the

FRP sheet having clearance holes provided as per the main

fasteners Weatherproofing shall be provided at all flashing

points under the normal flashing by the fitting of a foam closure

strip to match the profile being used. Closure strips will be

sealed to the sheet with an appropriate non setting silicone

sealant. Excluding the cost of purlins rafter and trusses.

(A) 1.5 mm thick 0.00 992.00 S.M.

(B) 2 mm thick 0.00 1,100.00 S.M.

187 Self.Ex Providing & Fixing Polycarbonate sheet roofing with surface

pl. of the sheet is coated with an anti-UV Co-extrusion layer having

good weather resistance, it can maintain its optical properties

and mechanical performance for a long time. Fasting is usually

done by screws., The fastening screws should be inserted

about 500 mm apart and 300mm apart Along the supporting

internal purlin and edge pulin.All fixing holes with diameter at

least 2 mm larger than screw must be predrilled into each

screw location. The screws should be 6mm diameter with

length according to sheet thickness and corrosion resistant,

with at least heavy duty hot dripped galvanized or stainless

steel. Excluding the cost of purlins rafter and trusses.

(A) 1.5 mm thick Solid Sheet 0.00 1,261.00 S.M.

(B) 2 mm thick Solid Sheet 0.00 1,510.00 S.M.

188 Self.Ex Pro.& fixing corrugated ACRYLIC COLOURED - 1.m mm

pl. roofing fixed with galvanized from 'J' or 'L' hook bolts & bolt

mm dia with bitumen and Limpet washer filled with white \lead

etc. comp. excluding the cost of purlins rafter & trusses

Part - O Rolling Shutters Work

ITEM Qty. Per Amount

189 83, 84, Providing and fixing rolling shutters of approved make made

85 of 80 mm wide M.S. laths inter locked together through their

entire lenght and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete

(A) Shutters having width below 3.5 M. 0.00 3,554.40 S.M.

(B) Shutters having width 3.5 M and above. 0.00 4,546.01 S.M.

190 Self.Ex Providing and fixing 27.5 cm. long wire spring grade No.2 of

pl. approved make for rolling shutters. 0.00 751.92 Each

191 Self.Ex Providing and fixing Hood cover for rolling shutters

pl. (A) Shutters having width below 3.5 M. 0.00 155.16 R.M.

(B) Shutters having width 3.5 M and above. 0.00 162.22 R.M.

Part - P Glazing & Glass Work

192 Self.Ex Providing & laying sun control or frosted milky glass film as

pl. approved colour,design,cutting complete as per instruction by

engineer in charge. 10.00 480.00 S.M.

193 144 Providing and Fixing Structural Glazing with toughened IGU

8mm clear float heat strengthened glass + 12mm Air Gap +

6mm clear flot toughened glass The Panels shall be sealed with

Dow croning 995 sealant. All the hardwares to be used shall be

of SS. Retainers shall be used to hold the glass so as to

decrease the dead load on the silicone. The work shall be

completed as directed by engineer in charge.

194 145 Providing and Fixing Structural Glazing with 8mm clear float

heat strengthened and toughened glass. The Panels shall be

sealed with Dow croning 995 sealant. All the hardwares to be

used shall be of SS. Retainers shall be used to hold the glass

so as to decrease the dead load on the silicone. The work shall

be completed as directed by engineer in charge.

195 146 Providing and Fixing Glazed roof with 13.52 mm thick glass

(6mm tinted tuffened + 1.52 pvb + 6mm clear float

toughened glass) The joints shall be filled with weather

silicone of appropriate color (Dc -789/688). The work shall be

completed as directed by engineer in charge.

196 147 Providing and Fixing Glazed floor with 18.28 mm thick glass

(8mm heat strengthened glass + 2.28 PVB + 8mm HS

glass).The joints shall be filled with weather silicone. The work

shall be completed as per the drawing supplied and to the

satisfation of the engineer in charge. 0.00 14,112.00 S.M.

197 163 Providing and fixing of Structural SPIDER GLAZING WITH

GLASS FIN SYSTEM,Glass panels to be formed as per

approved modules 12mm thick clear toughened glass edge

polished and accurate designed holes to be installed by means

of stainless steel spider fittings of an approved make and shall

comply to all international codes for the main fascade.

1.The system shall be approved spider system of Saint-Gobain.

2.Structural glass wall systems shall be complete with proper

water tight sealants, gaskets.

3.Fasteners shall be of 316 / 304 grade stainless steel of

strength and type appropriate to their use and shall be

tightened to specific torques. The bolts and nuts fixing to the

glass fittings to the supporting structure shall be high tensile

steel grade 8.8 as per AS 1511-

4.Spider fittings shall be of 316 / 304 grade stainless steel of

tensile strength 600 Mpa supplied by approved glass

assemblies of strength and type appropriate to their use and

shall be tightened

to specific torques with calibrated wrenches. The fittings are

protected from direct contact with the glass by separators of

Nylon/Teflon or equivalent approved make black in colour and

manufactured to international standards.

5.Glass to Glass joints shall be 12mm with clear silicon of

6.The glass fin shall be of 19mm thk and 450mm width

connected with S.S Spilce plates and S.S bolts which acts as a

back up structure to the main fascade

7The Glass wall system shall confirm to the following codes

8Australian standards

A) AS TM- E1300 –04 : Glass in Building selection and

B) AS 2208: Safety glazing materials for use in building.

C) BS 6262 : Glazing for Buildings.

D) BS 6206 : Impact performance requirements. (As Per

Architecture specification and suggetion) (RA- )

198 Self.Ex Providing & fixing 12mm thick toughend glass door with enox

pl. fittings & also with floor spring .note flooring cutting covered

inthis item so no extra claim for vitrified / kotah flooring .(RA- )

199 Self.Ex Providing & fixing 12mm thick toughend glass partition with

pl. enox D-brecket fittings in this item so no extra claim for

vitrified / kotah flooring .

ITEM Qty. Per Amount

200 Self.Ex Providing & fixing 12mm thick toughend glass railling with

pl. enox D- brecket fittings and incl. SS pipe 32 mm dia for side

support with nessasry fitting include welding, lifting, placing,

electric rods etc. complete welding rods to be used as per the

Indian Standards. in this item so no extra claim for vitrified /

kotah flooring. as directed by engineer in charge.

Part - Q Stainless Steel Work

201 134 Providing and fixing stainless steel (Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners, stainless steel

bolts etc., of required size, on the top of the floor or the side of

waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

202 Self.Ex Providing & fixing & making S.S / ALUMINIUM RAILING of

pl. height 1.15 mtas per detail using 50 mm hollow pipe of

mm tk or as per detail using 12mm toughned glass with

frosted work as per design in continus pattern as balustrade

and shoe box of aluminium or S.S of 316 grade to be used for

mounting with the floor on granite top,as per details,including all

anchoring/ core work ,labour materials,all necessary hardware

including wastage As per attached drawing and complete the

work satisfactorily as per instruction of architect or Engineer-in

Part - R Ground Devlopment Work

203 123 Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and

depositing on the road side slope as directed up to 50 mt. lead.

204 120A Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator machine

including watering and filling in depressions which occur during

the process as directed by engineer in charge.

205 Self.Ex Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

pl. watering, ramming & consolidation etc. complete. 0.00 225.00 C.M.

206 119 Supplying & filling fine sand(pana) in 75 mm / 100 mm /

mm compacted thickness over the base including necessary

compaction, watering etc. complete. Item includes leveling by

using vibratory plates compacted machine and as directed by

engineer in charge. 0.00 1,016.00 C.M.

207 Self.Ex Providing, Supplying & Sprading of Gravel in Play area

pl. including dressing etc. comp. 0.00 1,150.00 C.M.

208 121A Removing & resetting existing readymade c.c. kerb stone of

required size & thickness in line level and in truly vertical

position including filling joints in C.M. 1:1 (1 part of cement :

part of coarse sand) inclining watering etc. complete and as

directed by engineer in charge 50.00 56.00 R.M.

209 122B Removing & Refixing interlocking type cement concrete

paver block (Rubber moulded) of approved shape, design &

colour fixing on fine sand bedding. Item includes levelling by

using vibratory plates compacted machine. Item also includes

all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete.

210 121 Providing 100mm thick readymade C.C. kerb of strength M-20

(size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

(A) For rounding at the edge of footpath (For fanning

portion) 0.00 274.00 R.M.

211 122A Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding. Item includes

levelling by using vibratory plates compacted machine. Item

also includes all materials, labour, equipments, tools, plants,

watering, cleaning etc. complete.

(A) With Colour 1300.00 524.00 S.M.

(B) Without Colour 1300.00 524.00 S.M.

212 122 Providing & fixing interlocking type Cement Concrete paver

block of approved shape & design having 60 mm thickness (M-

40) purchased from SMC's approved paverblock manufacturer

only on fine sand bedding. Item includes leveling by using

vibratory plates compacted machine. Item also includes all

materials, Labour, euipments, tools, plants, watering, cleaning

etc. complete. 0.00 553.00 S.M.

(A) For Road Junction 80 mm thick ( M-50) 0.00 714.00 S.M.

ITEM Qty. Per Amount

213 120 Providing & laying Granular sub base (GSB) confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift

etc. complete. 0.00 1,469.00 C.M.

214 Self.Ex Removing & resetting rough kotah stone paving for footpath

pl. in line, level and in proper gradient including 25 mm thick

bedding in C.M. 1:6 ( 1 part of cement : 6 part of coarse sand)

with sufficient ramming consolidation. Providing joints in C.M.

1:3 ( 1 partof cement : 3 part of coarse sand) and smooth

pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand)

including watering etc. complete and as directed by Engineer in

charge 0.00 155.51 S.M.

215 Self.Ex Providing & laying cement concrete Pavement using 1:1.5:3 (1

pl. cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

216 Self.Ex Providing & laying cement concrete Pavement using 1:2:4 (1

pl. cement:2 sand:4 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

217 Self.Ex Providing and laying 200 micron plastic sheet on prepared

pl. sub base For V.D.S Concrete 0.00 26.00 S.M.

218 Self.Ex Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of

pl. total thickness with filling of epoxy sealent as directed by

engineer in charge 0.00 50.00 R.M.

219 148 Repair/Maintenance. Longitudinal & Transverse Crack

Filling Upto 10mm.------Longitudinal / Transverse Cracks

having width upto 15mm shall be Routing / grooving along

longitudinal cracks traversing through multiple panels, removing

debris, making V shape groove ,cleaning by air blower

,Substrate priming with epoxy Primer and resealing with Epoxy

Mortar Sikadur-41 or Equivalent including all complete for

widths upto 10mm.. 0.00 150.00 R.M.

220 149 Repair/Maintenance Longitudinal & Transverse Crack

Filling above 11mm & up to 25 mm. Panels having severe

longitudinal cracks shall be repaired by Routing / grooving

along longitudinal cracks traversing through multiple panels,

removing debris, making V shape groove , cleaning with air

sticthing with reinforcing steel (10mm dia @ 300mm C/C),

Substrate priming with epoxy Primer and filling with EPOXY

mortar Sikadur-41 or Equivalent as instructed by the engineer

for widths above 10mm & up to 25m .

221 150 Repair/Maintenance Longitudinal & Transverse Crack

Filling Above 25mm. Panels having severe longitudinal cracks

shall be repaired by Routing / grooving along longitudinal

cracks traversing through multiple panels, making V shape

groove , removing debris, cleaning with air blower, sticthing with

reinforcing stell (10mm dia @ 300mm C/C) , Substrate priming

with Epoxy Primer and filling with EPOXY mortar Sikadur-41 or

Equivalent as instructed by the engineer for widths above

Part - S False Celiling Work

222 Self.Ex Providing and fixing PVC plain colour false ceilling with grid

pl. type with alu frame consisting of 600 mm x 600mm 3mm thick

plain PVC sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1” x 1” (25 x 25mm,

19 gauge or 1mm thick) in square pattern of grid sizes of 2 x

(600 x 600mm). The alluminium frame work is supported from

the ceilling with the help of G.I. hook and G.I. wire/6mm M.S.

rods of required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles etc.

Complete as per direction of Engineer in charge. Manufactures,

specification and drawing

223 Self.Ex Providing and fixing PVC Printed pain colour false ceilling

pl. with grid type with alluminium frame consisting of 600mm x

600mm 3mm thick plain PVC sheet used as panel insert in a

frame work made using anodized alluminium T section of size

x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of

grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is

supported from the cceiling with the help of G.I. hook and G.I.

wire/6mm M.S. rods of required sizes to maintain proper level

etc. The aluminium frame work is supported on side wall with

the use of alluminium L section of size 1 x 1 (25 x 25mm)

angles etc. complete as per direction of Engineer in charge.

Manufactures specification and drawing.

ITEM Qty. Per Amount

224 Self.Ex Supply & Fixing of 16mm.th. Armstrong classic Lite

pl. square edge mineral fiber celling with 24mm grid (local)

G.I. Frame girid consist of 600mm x 600mm. tecno grid pre

coated main runner 38 x 24 x3600 mm, cross T 30 x 24 x

1200 mm, cross runner 24x24x600mm,wall Angle 24 x

24 mm. required length suspension wire of 2.50mm

G.I. and necessary hardware etc. comp.approved by

engineer-in-charge 0.00 950.00 S.M.

225 Self.Ex Supply & Fixing of 06mm.th. Textured E board celling

pl. with 24mm grid (local) G.I. Frame girid consist of

600mm x 600mm. tecno grid pre coated main runner 38x

24 x3600 mm, cross T 30x24x1200mm,cross runner 24x

24x600mm, wall Angle 24 x 24 mm. required length

suspension wire of 2.50mm G.I. and necessary hardware etc.

comp.approved by engineer-in-charge

226 Self.Ex Providing and fixing 10 mm. thick cement sheet ceiling with

pl. G.I. framing incl. suppling necessary materials etc.comp.

227 Self.Ex Providing & Replacing of existing gypsum board false

pl. ceilling at broken false ceilling using with 12mm th. India

gypsum board, screw, joining tap, powder etc. complete

as per instruction by engineer in charge.

Part - T Sticker Fixing Work

228 Self.Ex Wall Vinyl Sticker

229 Self.Ex Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

230 Self.Ex Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

231 Self.Ex 5mm PVC sheet Eco Vinyl (Any size)

232 Self.Ex Decorative theme base designing & painting with all waterproof

pl. materials 0.00 63.00 S.ft.

Part - U Miscellaneous Work

233 Self.Ex Carring out plinth treatment to post construction / existing

pl. structure by spraying chemical solution for termite control

treatment including labour and material consistment with ISI

specification. Using Chlordene and Chiorpurfiles 20 EC. As per

6131_paret-II Consentration Weight one percent is

recommended i.e. one litre 20 EC chemical emulsion with

liter give 1% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 litre chemical / Sqm of

surface is recommended as per IS.

234 Self.Ex Providing & Fixing 50 mm dia M.S. pipe as vertical post are

pl. beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class 0.00 485.00 R.M.

235 Self.Ex Providing & Fixing 80 mm dia M.S. pipe as vertical post are

pl. beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class 0.00 750.00 R.M.

236 Self.Ex Providing and fixing rebar of following diameter using

pl. chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material, labour,

etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be submitted

and got approved from the authority prior to start of work. The

rate shall also include cost of drilling of hole of required

diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and

other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but

excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-

237 Self.Ex Cutting out cracks of wall or terrace to V section

pl. ,cleaningout, grouting with cement and sand slurry 1:3 (1

cement : 3 sand ). at any height 100.00 41.41 R.M.

238 Self.Ex Crack Repairs:-Crack filling using fiber reinforced polymer

pl. modified mortar after openning crack in "V" grove, Making

Surface dust free, with a bond coat of polymer as per the data

sheet for crack repairing cracks less than 8mm

239 151 Providing and filling the expansion joint by polymer confirm

to BS 4254-1983 as per required shade and manufactured

specifi cation by making groove of 25 mm x 12.5 mm lather by

cutting or by repairing groove and removing mortar drop or any

other foreign materials including applying primer and filling

required size (oversize of joint PU foam etc.) complete

ITEM Qty. Per Amount

240 152 Providing and laying and fixing 25 mm thick expansion joint

by hydro cell semi rigid UV resistance with high performance

laminated closed cell polythene foam joint filler in sheet foam

as directed, etc. complete. 0.00 879.84 S.M.

241 Self.Ex Removal of existing treatments, kota stone, Concrete

pl. Surfaces, sealants, cleaning by air/water blasting. Rate

includes removal of all civil items and carrying the debris to the

ground level etc. complete including cleaning of the groove.

The rate includes all labour, material, scaffolding charges etc.

complete as approved by Engineer incharge.

242 Self.Ex Preparing the cleaned groove of 50mm width after

pl. application of bonding agent mixed with cement having neutral

PH value and solid contains of 44% like PERMA BOND SBR or

equivalent. Edge make up will be with the help of the polymer

mortar consisting of above SBR + cement + sand. The rate

includes all labour, material, scaffolding charges etc. complete

as approved by Engineer incharge.

243 Self.Ex Placing oversize back up rod / sheet of SUPREME or

pl. equivalent make in the expansion joint so as the depth of the

sealant is controlled to 10 mm as approved by Engineer

incharge. The rate includes all labour, material, scaffolding

charges etc. complete as approved by Engineer incharge.

244 Self.Ex Filling of the expansion joint silicone sealant like DOW

pl. CORNING CCS or equivalent in 50mm x 10 mm and

finishing the expansion joint. The rate includes all labour,

material, scaffolding charges etc complete as approved by

Engineer incharge. 40.00 1,357.00 R.M.

245 Self.Ex Removing the old sealent between the glass of 12 mm /

pl. mm, cleaning it properly with Iso propyl solvent and then

placing appropriate size of closed cell back up rod (Supreme

make) and then Refilling the joints with DOWSIL 789 black

colour in the joint. The minimum depth of the sealent has to

be 8 to 10 mm. The material should be filled in a finishing so

that there is no overlap on the glass and the joint is filled up

and made waterproof.

246 Self.Ex Providing and fixing Door Matt of Dura soft quality (Basic

pl. Rate : Rs. 800 per sq.mt.) with necessary adhesive including

cutting in all size and shape as per engineer-incharge.

247 Self.Ex Prov. & Fixing Roller type Curtain as per aprooved complete

pl. as per instructions by engineer in charge. 30.00 1,500.00 S.M.

248 Self.Ex Prov. & Fixing Fabric Curtain (three fould) with SS 1"

pl. pipe, socket, PVC ring (fabric Besic rate 200/- mtr.)

necessary hardware as per aprooved fabric, designe

complete as per instructions by engineer in charge.

249 Self.Ex Repairing of Curtains

250 Self.Ex Providing & laying of PVC Carpet stick With fixing on

pl. existing flooring by adhesive material including finished with

flush pointing & cleaning the surface etc. comp 0.00 450.00 S.M.

251 Self.Ex Providing and Installation of Carpet

252 Self.Ex Providing & fixing hard drawn wire fabrics 75 mm x 25 mm

pl. MESS of weight not less than 7.75 kg/s.m to

windows/ventilators frames etc. at all floor levels including

mm x 20 mm bidding of teakwood incuding providing and fixing

salwood frames 7 cm x 7 cm size for ventilators etc complete.

For Ventilators all floor. 0.00 1,342.00 S.M.

253 Self.Ex Applying polymer modify mortar in proportion at 1:2(one part

pl. cement: 2 part white sand(sweet water) with chemical(SBR)

dosage of minimum 5 litre pe bag of cement. Also apply

bonding agent prior to polymer modify mortar in proportion of

(1:1)(1 part SBR : 1 part cement) using Roof, MC and FOSROC

(A) Beam / Columns 0.00 1,830.00 S.M.

(B) Ceiling 0.00 1,830.00 S.M.

254 159 Providing and fixing 40 mm dia. GI -B class pipes railing &

with three horizontal rows of pipes and posts of 27A angle iron

of size 65 mm x 65 mm x 8 mm RCC 150 mm and 1.15 m.

height and placed at 1.85 m C/C including two coats of oil paint

and anchorage in C.C. etc. complete 0.00 1,470.00 S.M.

255 Self.Ex Chemical treatment of DR.FIXIT brand for various required

pl. surfaces 0.00 232.92 S.M.

256 153 Providing and fixing 50cm wide M.S. Ladder fabricated from

M.S. Flats 10mm x 75mm with 20mm dia steel bar steps in

double rows, @ 30cm c/c. This include stays of 10mm x 50 mm

flats fixed at 3 mt C/C with weldind anchoring and 3 coats

anticorrosive paint. 0.00 2,958.00 S.M.

ITEM Qty. Per Amount

257 Self.Ex (A) During Casting providing and Fixing CAPECELL HD100

pl. PRE mouled to mort & H Specification (Clause 1015) Having

minimum Density 95kg/cum Meter ,non stalning with less than

1%Water Aabsorption &compression recovery of 93% minimum

as per Specification of 75 mm wide expansion joint including

cutting to reqired size and shape at all levels etc.

(B) 1) Cleaning of concrete surface on both side of the

expansion joint to remove any dust oil grease including removal

of laitance and cleaning the inside of the expansion joint with

compressed air.

2) Repairing the edges of the joint (in case of weak concrete at

the joint edge and also configuring the joint width with epoxy

repair motar sikadur 31 andof the chosen sikadur Combiflex

Tape width) with epoxy repair mortar Sikadur 31 and Sikadur

3) Supply and apply an epoxy based membrane adhesive base

coat. Product Sikadur®-31 C.Consumption :0.5 kg/m (strip

width 200 mm) C.Consumption :0.7 kg/m (strip width

4) Supply and apply a fiexible FPO based membrane.

PRODUCT :Sikafdur®-Combiflex® system Product

requirement Chemical Base Modified flexible polyolefin (FPO)

with advanced adhesion Fire Rating Euroclass E

(ENISO119252-2 classification to EN 13501-1) Service

Temperature -30o C min to +40o C max. in wet conditions -30o

C min to+60o C max.in dry conditions Mechnical / physical

properties Tensile strength > 12 N/mm2 (EN 12311-2) Tear

Strength >40N/mm(ISO 34-B Elongation at Break>600%(EN

12311-2) Seam strength >300N/5cm (2mm)(EN 12316-2)

>400 N/5cm(2mm)(EN 12317-2) Behaviour under hydrostatic

pressure 6bar/72h No leakage (EN 1928-B) Resistance

Chemical Resistance Please consult the sikadur -combifflex SG

system product data.sheet Thermal Resistance Thermal ageing

passed(SIA V260,1996) Bonding test : No cracks at-40 C(EN -

495-5) Artificial weathering 7500 h passed (SIA V280,1996),

5) supply and apply an epoxy baseed protective top coat foe

Product :sikadur® -31c,TAPE W TAPE Thik- Adhesiv

consumption* 15cm 1 mm =1.0 kg/m, Product requirements

:mixed density 1.75 kg/ltr ,bond strength > 1.5 N/mm2 *The

consumption can vary dependent on site conditions (surface

roughness,size of aggregate etc) 0.00 7,890.00 R.M.

258 Self.Ex Labour work for chiesel shape (Bhala type) of grill square

pl. bar or Round Bar. 0.00 10.00 No.

259 Self.Ex Providing & Fixing 8 mm dia Chain For Swing

260 Self.Ex Providing & Fixing Kada For Swing

261 Self.Ex Labour charges - Carpentar 1st Class

pl. 5.00 368.85 Each

262 Self.Ex Labour charges - Plumber (Fitter)

pl. 5.00 368.85 Each

263 Self.Ex Labour charges - Mason 1st Class

pl. 0.00 368.85 Each

264 Self.Ex Labour charges - Painter

pl. 5.00 368.85 Each

265 Self.Ex Labour charges - Mazdoor (Male)

pl. 0.00 351.68 Each

266 Self.Ex Labour charges - Mazdoor (Female)

pl. 0.00 351.68 Each

267 Self.Ex Labour charges - Welder

pl. 5.00 368.85 Each

268 Self.Ex Welding Charge

Part - V Plumbing Work

(i) Water Supply

269 62 Providing & laying in trenches galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL

MAKE of the following nominal bore & tube fittings etc. comp..

270 61 Providing & Fixing to wall, ceiling floor at all floor levels,

galvanised mild steel tubes(medium grade) TATA / ZENITH /

ASIAN / JINDAL MAKE of the following nominal bore, tube,

fittings & clamps incl. making good the wall ceiling and floor etc.

ITEM Qty. Per Amount

271 Self.Ex Providing, Laying and jointing on true line and level UPVC pipe

pl. (SCH-40) line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex

make including fittings make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost

of all materials.

272 Self.Ex Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

pl. Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin

of approved brand & manufacture etc. comp. Pipe shall be fixed

on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

273 Self.Ex Providing & Fixing Brass Tee at all floor levels, of approved

pl. quality including fixing etc. Complete

274 Self.Ex Providing & Fixing U.P.V.C Tee at all floor levels, of approved

pl. quality including fixing etc. Complete

275 Self.Ex Providing & Fixing U.P.V.C Alba at all floor levels, of approved

pl. quality including fixing etc. Complete

(ii) Sanitary Installation

276 53 Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp. (A) Vitreous china long pattern of approved colour For

all Floor 0.00 1,471.41 No.

277 53 Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

mm size "P'or "S" trap for water closet squatting pan joining

the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117*,

Jaquar,HindWare 20143 0.00 3,277.39 No.

278 53A Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap including jointing the trap

with soil pipe in cement mortar 1:1 (1 cement : 1 find sand)

(seat and cover to be measured and paid for separately) (A)

Viterous china pattern - I (i) in approved colour

279 53A Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat

cover L bend ncluding jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT-

280 53B Providing and fixing plastic seat and cover for wash down

water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover. 30.00 291.33 Each

281 135 Providing & fixing Urinal or approved quality including

conecting the Urinal with waste pipe, tap etc. complete. (A)

White earthenware flat back or corner type size 430 mm x

282 135 Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm

dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall

with C.P. flange complete including cutting and making good

the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT- 13261H ,HindWare BACK SMALL

283 Self.Ex Providing & fixing white vitreous china Ladies urinal of size

pl. 470x360X100 mm and 15mm dia. C.P. spreader, and pipe to

wall complete including cutting and making good the walls and

floors wherever required.

Make- Cera 4040101, Parry ware C0503, HindWare

ITEM Qty. Per Amount

284 54 Providing & fixing wash basin with single hole for pillar tap atall

floor levels, with C.I. or M.S. Brackets painted white incl. cutting

holes & making good the same incl. fittings such as pillar tap,

capstan head screw down high pressure with screws, shanks &

back nuts, C.P. Brass waste trap, screw down stop tap 15 mm.

dia. etc. complete. (A) Vitreous china flat back wash basin

mm.x 400 mm. size in approved colour For all Floor

285 54 Providing & fixing Wash Hung basin with single hole for pillar

tap , Size- 550 x 400 mm at all floor levels, with C.I. or M.S.

Brackets painted white incl. cutting holes & making good the

same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004 10.00 3,276.63 No.

286 164 Providing & fixing Salem StainLess Steel AISI-304 (18/8)

double bowl Industrial S.S. Costumize Wash Basin size of

OD=33" x 22" inch and bowl size 16" x 14" x 5.5" inch including

of weast coupling ,bottel trape , angle cock 15 mm Dia , pillar

cock,weast pipe at all floor levels, incl. cutting holes & making

good the same incl. fittings such as pillar tap, capstan head

screw down high pressure with screws, shanks & back nuts,

etc. complete. design as per architech and engineering in

charge For all Floor(RA- )

(i) For All Floor 10.00 8,004.00 No.

287 55 Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet or

plywood sheet & fixed to wooden plugs with C.P.brass screws

and washers etc. For all Floor 15.00 859.41 No.

288 Self.Ex Providing & fixing C.P. brass pillar cock with copper

pl. connection, C.P. brass screws complete

Make- Cera F2013101, HindWare Cat. No.: F650003, Jaquar

289 63 Providing & Fixing C.P. Brass screw down bib tap at all floor

levels, polished bright etc. comp.-(A) 15mm dia. For all Floors

290 63 Providing & Fixing 15 mm Dia bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, HindWare F280002 BIB

COCK, Jaquar FLR-5047 N BIB COCK 32.00 1,353.77 No.

291 Self.Ex Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at

pl. all floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat.

No.: F530004, Jaquar FLR-5041N 0.00 1,828.81 No.

292 Self.Ex Providing & Fixing pressmatic bib tap with wall Flange at all

pl. floor levels, polished bright etc. comp.

Make- Cera F9020151, Parry ware G2056A1, Jaquar PRS-

293 Self.Ex Providing & Fixing Brass Doctory bib cock at various places at

pl. all floor approved quality as directed By Eng.in charge.

294 64 Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete.

295 65 Providing & Fixing chromium plated brass half turn flush

cock at all floor levels, of approved quality incl. fixing in pipe

line etc. Comp.

296 65 Providing flush cock consisting lever, cartridge sleeve & flange

& concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101, Jaquar FLR 5083 KN , CONCEALED BODY ALD-

081,HindWare F280052 & CONCEALED STOP COCK

297 Self.Ex Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

pl. with C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera F1020362, HindWare Cat. No.: F440020

F850094, jaquar CON 053 KN 25.00 1,564.36 No.

298 66 Providing & Fixing abonite ball cock of approved qualities

directed etc. comp.

299 Self.Ex Providing & Fixing P.V.C. Ball valve at all floor levels etc.

300 Self.Ex Providing and fixing brass screw down stop tap.

ITEM Qty. Per Amount

301 65A Providing Metropole Flush Valve Dual Flow 40mm Size

(Concealed Body)

Make- Cera F8010202, Jaquar FLV-1089NSQ, HindWare

302 Self.Ex Providing & Fixing Brass Laboratery cock at various places at

pl. all floor approved quality as directed By Eng.in charge.

303 Self.Ex Providing & Fixing Connection Pipe for Pillar cock at all floor

pl. level etc. comp.

304 Self.Ex Providing and fixing Waste Pipe for Wash basin or sink.

305 Self.Ex Providing and fixing Supply Pipe for Washbasin or sink.

306 Self.Ex Providing and fixing Jet Sprey Cock at all floor level etc.

pl. complete. 10.00 500.00 No.

307 Self.Ex Providing & Fixing PVC West Cuplin at various places at all

pl. floor approved quality as directed By Eng.in charge. 0.00 60.50 No.

308 Self.Ex Providing & Fixing S.S. West Cuplin at various places at all

pl. floor approved quality as directed By Eng.in charge. 0.00 93.50 No.

309 Self.Ex Providing and fixing chromium plated, bottle trap with

pl. necessary couplings of approved quality for wash basin. 0.00 331.29 No.

310 Self.Ex Providing & fixing of overhead shower 80 mm (3”) dia with

pl. flow with Overhead Shower arm 200 mm with wall flange

Make- Cera F7010602AB, Jaquar OHS-1989, HindWare Cat.

311 Self.Ex Providing and fixing Towel Ring fabricated from seamless

pl. stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Jaquar ACN-1121N, HindWare

312 Self.Ex Providing & fixing S.S.towel rail of 600 mm long approved

pl. make including, providing & fixing C.P. brass screws, making

holes in walls & making good.

Make- Cera F5015103CH, Jaquar 1111BSM, HindWare

313 Self.Ex Providing & Fixing stainless steel recessed type Soap dish of

pl. approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Jaquar ACN-1131N, HindWare

314 Self.Ex Prov.& Fixing Health Faucet ABS Body with wall Hook and

pl. Meter chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Jaquar ALD-587, HindWare

315 Self.Ex Providing & Fixing Hand Shower at all floor levels, of approved

pl. quality including fixing etc. Complete

Make -Cera,Parry ware, Jaquar, Hindware 0.00 1,800.00 No.

316 Self.Ex Providing & fixing Paper holder with flap guard of 150 mm

pl. long approved make including, fixing C.P. brass screws,

making holes in walls & making good.

Make- Cera f5002110, Jaquar AHS-1551, HindWare F890003

317 Self.Ex Providing Sink Cock with Regular Swinging Spout

pl. Make- Cera F2008251 , Jaquar FLR-5347N, HindWare

318 Self.Ex Providing and fixing garden hose pipe with 15 mtr length of

pl. approved quality :

319 Self.Ex Providing & Fixing Water proof M-Seal at various places

pl. approved quality as directed By Eng.in charge. 0.00 176.00 No.

(iii) Internal Drainage

320 91A Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

for rain water at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand & manufacture

etc. comp. (M.R.)

321 91 Providing & Fixing U-PVC pipe (SWR) confirming to IS

no.13592 (Type "B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make for soil and waste discharge system at all floor

levels incl. All fixtures like bends, tees, shoe etc. jointed with

resin of approved brand & manufacture etc. comp. (M.R.)

322 Self.Ex Providing & Fixing Kathi around the vertical PVC drainage

pl. pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge.

(A) 75 mm PVC PIPE 0.00 173.00 R.M.

ITEM Qty. Per Amount

323 56 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal

diameter of self cleaning design with C.I. scread down or

hinged grating including the cost of cutting and making good

the walls. 10.00 586.27 No.

324 56A Providing and fixing 100x 100 mm Size P.V.C /C.I Greting (Jali

) for Nani Trap. 30.00 43.63 No.

325 74 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

326 74A Providing & fixing M.S. Holder Bat clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of

cutting holes & making good the wall etc. Complete - 100 mm.

327 Self.Ex Providing & fixing G.I./Aluminum Patti clamps at all floor

pl. levels of approved design to C.I. Or S.C.I pipes including the

cost of cutting holes & making good the wall etc. Complete -

328 Self.Ex Providing & fixing Z - clamps at all floor levels of approved

pl. design to C.I. S.C.I. or PVC pipes including the cost of cutting

holes & making good the wall etc. Complete - 100 mm dia as

per architect instructions.

(C.) 110 mm dia to upto 150 mm dia. 0.00 90.00 No.

(D) 150 mm to 200 mm dia. 0.00 98.00 No.

329 Self.Ex Providing and supplying at site of work of approved make

pl. and as directed by engineer in charge including frieght, loading,

unloading, stacking, insaurance & all taxes etc.complete

(A) PVC couplers 6kg/cm2 fabricated 160mm 0.00 439.00 Each

(B) PVC couplers 6kg/cm2 fabricated 200mm 0.00 678.00 Each

(C.) PVC elbow moulded 160mm 0.00 687.00 Each

(D) PVC elbow moulded 200mm 0.00 1,568.00 Each

330 75 Providing and fixing G.I. Rain water spout of 50mm dia. and

30cm. length. 0.00 101.91 No.

(iv) External Drainage

331 60 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe

In C.M. 1:1 of following nominal internal diameters incl. Testing

of pipes and joints etc. Comp

(A) 100 mm. dia.

332 57A Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary

(C.M 1:5) chamber & water tight C.I. cover with frame of

300mmx300mm size (inside) with weight includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---

(A) 100mm x 100mm Size -P type 0.00 1,292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1,246.92 No.

333 57 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary

(C.M 1:5) chamber & water tight Pre cast R.C.C. cover of

300mmx300mm size (inside) includ. plastering smooth inside &

outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps--

(A) 100mm x 100mm Size -P type 0.00 1,098.05 No.

(B) 150mm x 100mm Size- P Type 0.00 1,052.77 No.

334 58 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension, 455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

(A) Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover 0.00 2,915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt

335 59 Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4

mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be

not less than 38 kg. On top etc. comp. Inside dimension,455 x

610 mm & 450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover 0.00 2,681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt

336 154 Providing, supplying & Fixing heavy duty 560 mm dia I.S.I mark

RCC precast machine hole frame with cover at site as per

design for circular machine hole including labour charge etc.,

Complete as per details in tender specification & as directed by

engineer in charge. 0.00 2,294.00 No.

ITEM Qty. Per Amount

337 155 Raising & Lowering Eixsiting Machine holes (with frames)

of drainage, storm drainage, sewer trap chamber, scraper

machine hole frame & cover any utility services up to newly

carpeted/recarpeted road surface including both of plain

cement concrete ordinary grade 1:1.5:3.(1 Part of cement :

Part of sand : 3 part of course aggregate) The inside & outside

surface of chamber shall be plastered in cement mortar 1:3 (1

part of Cement and 3 part of sand) include lobour required to

carry out the work. and cleaning the bitumen on the top surface

& removing road material from machine hole etc. complete.

338 156 Raising & Lowering up to 10 cm. Inlet chamber to the

required level up to FRL of DBM / BC including all Materials,

formwork including removing existing inlet chamber frame cover

and fixing existing inlet chamber frame cover and removing

existing material from inlet chamber (Add or Deduct Rs.571.00

per 0.10 mt. depth increase or decrease)

339 157 Providing and Fixing RCC precast inlet chamber cover of M-

30 Grade as per drawing and specification.

(B) Size-600 mm x 450 mm 0.00 722.00 No.

340 158 Providing and Fixing RCC precast inlet chamber frame of M-

30 Grade as per drawing and specification.

(B) Size-600 mm x 450 mm 0.00 529.00 No.

341 Self.Ex RCC precast M.H. frame & cover manufacture, supply &

pl. Delivery at store or at site of work precast RCC M-200 frame &

cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flat,

curing mold work etc.

(A) For circular manhole-machinehole of ISI marks (Heavy

duty) 560 mm dia. 4.00 2,294.00 No.

(B) For scrapper manhole-machinehole. 0.00 7,289.00 No.

342 Self.Ex Providing and fixing 40 mm thick RCC cover for simple

pl. chamber,s.w.trap & tank Top 0.00 400.00 No.

343 Self.Ex Supplying and fixing C.I. cover 300 mm X 300mm. without

pl. frame for gully trap (standard pattern) the weight of cover to

be not less than 4.53 Kg. 0.00 660.00 No.

344 67 Providing and fixing C.I. Machineholes cover 0.60 x 0.45 mt.

Size having weight not less than 35 Kg. etc. complete.

345 Self.Ex Providing & Fixing R.C.C.Manhole Cover

346 76 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved

water proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to

be mixed with 50 kg. cement bag shall be as recommended by

the manufacture of the water proofing material, concrete work

for top, bottom slab & side pardi for Under ground Tank & Item

incl. Necessary excavation & refilling the available earth, 15 cm

th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th. water

proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom of tank

curing etc. comp. incl. Locking arrangement, outlet, inlet,

overflow & wash out pipe arrangement as necessary & C.I.

Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineerin-

Underground tank 0.00 6.87 Lit.

347 92 Providing erecting and fixing double coated Sintex/ Super/

Reno PVC (ISI) mark water tank of required capacity each

with all necessary fittings & connection etc. complete on

terrace. 5000.00 3.95 Lit.

348 Self.Ex Providing and fixing PVC water tank cover upto 2000 Lit.

(vi) Water Boring

349 Self.Ex Labout charges for 6" Dia. Drilling in all Kind of soil up to

pl. required depth with necessary gravel packing etc,all comp. 0.00 344.40 R.M.

350 Self.Ex Providing & Erecting 5"inch P.V.C. plain CS pipe of standard

pl. make (Finolex,Sumolex,Ashirwad) to be erected as casing pipe

in bore etc.comp. 0.00 393.60 R.M.

351 Self.Ex Providing & Erecting 5"inch P.V.C.stainer of standard make

pl. (Finolex,Sumolex,Ashirwad) to be erected as casing pipe in

bore etc.comp. 0.00 426.40 R.M.

352 Self.Ex Providing & Lowering 40" Dia, H.D.P.E. Std. pipe of standard

pl. make (Gindal) with required fitting etc. comp. as directed

353 Self.Ex Providing & Lowering 25" Dia, G.I.Std. pipe of standard make

pl. with required fitting etc. comp. as directed 0.00 321.44 R.M.

354 Self.Ex Providing & fixing bend, Coupling, M.S. clamp, Adaptor Set with

pl. Required 0.00 3,000.00 R.M.

ITEM Qty. Per Amount

355 Self.Ex Providing & Lowering of standard make pump set with

pl. necessary ISI cable,SD starter switch all Required, Pump set

having capacity of 106 LPM at 40 mtr. head capacity 2HP all

Total Amount in words :- Rupees Forty Nine Lakhs Forty Eight Thousand Five Hundred Eighty and

Total Amount in words :- Rupees Forty Nine Lakhs Forty Eight Thousand Five Hundred Eighty and

Thirty Five Paise Only.

EXECUTIVE ENGINEER

SOUTH WEST ATHWA ZONE

SURAT MUNICIPAL CORPORATION

SIGNATURE & SEAL OF CONTRACTOR

NAME & ADDRESS :-