Construction of room for establishment of luggage scanning machine at junction point connecting various pedestrian path near stand for TTSNDJI, Distt. Bilaspur (HP)

Centering and shuttering including strutting, propping etc. and removal of form for :- Columns, Pillars, Piers, Abutments, Posts and Struts within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for :- Suspended floors, roofs, landings, balconies and access platform within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement within all lead & lifts, complete in all respect as per direction of Engineer-in-charge (A)1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of apporved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level. complete in all respect as per direction of Engineer-in-charge. (A) Thermo-Mechanically Treated bars of grade Fe-500D or More.

Brick work using common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level upto floor V in all shapes and sizes in within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) Cement mortar 1:6 ( 1 cement : 6 sand ) 2 nd Class Bricks

Half brick masonry in common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level up to floor V level within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A) Cement mortar 1: 4 ( 1 cement : 4 sand) 2nd Class Bricks.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A)Fixing with carban steel galvanised - fastener of requried dia and size (to be paid for saprately)

15 mm cement plaster on rough side of single or half brick wall of mix within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (a) 1:6 ( 1 cement : 6 coarse sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade within all lead & lifts, complete in all respect as per direction of Engineer-in-charge. (A)New work two or more coats applied @ 1.43 ltr /10 Sqm. Over and including priming coat of exterior primer Applied @2.20 Kg/10 Sqm.(Asian make, Apex createx screates finish)

Providing and fixing Toughned class in window frames 8mm thick with ceilcon and requried size clamp made of SS. pto all hights within all lead & lifts, complete in all respect as per direction of Engineer-in-charge.

Please Enable Macros to View BoQ information