REPAIR MAINT OF CERTAIN MISC BR WORKS AT RANIKHET UNDER GE RANIKHET

Amount

Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 all as specified and directed.

M&L for precast cement concrete block masonery with solid block of cement concrete 1:3:6 type C-1 ( using 20 mm graded stone aggregate) exc 10 cm in width and setting in CM 1:6complete all as specified and directed by Engg-in- charge

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces of brick work, finishing the surfaces fair and even complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 to vertical surface complete all as specified and directed.

M&L for 15 mm thick rendering CM (1:4) with WPC @ 3% by weight of cement finished even and smooth with additional thickness is provided as floating /setting coat in vertical surfaces all as specified and directed. (NOTE- WPC shall be measured and paid seperately)

Supply only WPC complete all as spd

M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete.

M&L for preparation of New plastered surfaces & applying a layer of Birla putty on wall surfaces including cornics etc for proper levelling of plaster and two coat of oil emulision distemper complete all as specified and directed.

M&L three coats of white wash on walls including all preparation complete

M&L preparation of old surfaces including cornices etc and one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls incl cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces & applying a layer of Birla putty on wall surfaces including cornics etc for proper levelling of plaster and two coat of oil emulision paint complete all as specified and directed.

Dismantling of ceiling board (flbre pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

S & F of 4 mm thick E-Board Classic (Make-Everest) for insulation and accoustic purpose, 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface complete all as specified and directed.

S&F of powder coated grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mmx24mmx0.3mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

S&F hollow wall lining dual colour consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete fixing arrangement icluding taking down old existing wooden panelling complete.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 20mm graded stone agg) as in foundation , filling and mass concrete complete all as specified and directed.

M&L 40 mm thick PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in flooring finishing cement concrete even and smooth with using extra cement complete all as spd

Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as spd

Surface channel in concrete 1:3:6 (40 mm graded aggregate) for drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as pecified and directed. concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.All as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels wit

S&F in repairs parquet flooring 8.3 mm thick hard board plank both side laminated with decorative surface and approved by GE laid above the thermoplastic sheet complete all as spd

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm dia bib tap long body CP, screwed for iron pipes complete all as specified and directed

S&F angle cock 15 mm bore chromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface

S&F pillar taps 15 mm bore, chromium plated , screwed down high pressure with or without letter Hot or Cold with long screwed shanks and fly nut complete all as specified, fixed in repairs.

S&F bib tap standard of PTMT (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath fitting), any colour, screwed foriron pipe 15 mm bore pipe (minimum weight 90 gm) all as specified, fixed in repairs (Make : Prayag or Equivelent as approved)

Dismantling water tanks 500 ltrs capacity complete all as specified and directed.

Dismantling water tanks of any description, capacity exceeding 500 litres but not exceeding1000 liters complete.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag complete all as specified and directed.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of Make - Prayag complete all as specified and directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe and fixed in repairs (min weight 210 gm).

S&F 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe and fixed in repairs (min weight 210 gm).

S&F PVC circular top cover suitable to rotational moulded polyethylene water storage tanks of 300 /500 litres capacity tanks of standard mares, with 6 mm dia nut and bolts on two ends of cover to act as hinge as will as locking arrangement for side opening

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar to dwarf wall or including fixing cautilever brack etc and connecting union to pipe over all size 915mmx460mm bowl size 405mm x 354mm x 178mm as approved by GEcomplete all as specified and directed.

S&F PVC WHB waste pipe 32/40 mm dia compolete all as spd

S & F in repairs 15 mm bore Fancy type chromium plated Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed.

M&L prelam particle board 18/19mm exterior grade prelaminated one side with decorative choice and other side balancing white fixed with screw to timber frame work in cup board complete all as spd

S&F aluminium partition powder coated of frame of aluminium section 44.45 x 44.45 x 1.6mm etc and 5 mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc.and as directed at site. Make Jindal or its equivalent approved make including taking down old userviceable wooden partition completeall as spd

S&F in repairs hydraulic door closer Aluminium ( Die cast) regulated designation No-3 universal type for door shutter complete all as spd

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs of galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal from site exc. 50 m complete all as specified and directed.

M&L 30 mm thick PCC type B-1,1:2:4 (using 20 mm graded stone aggregate) as in flooring complete all as spd

S&F brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed.

S&F chromium plated Soap disk fixed to plug with chormium plated brass screws all as specified and directed

S & F 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with brackets complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F mild steel framed work such as purlin , truss, square tube , MS pole , grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, welded wire mesh and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing in repair Welded steel wire fabric supplied n. exc 4 kg and fixed complete to wood or steel members

M & L for newly painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Joshi Constructions (BID ID -3151492)