Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-AOC PARACKAT HOUSE KAPRASSERY NEDUMBASSERY PO | ₹2.4 L | L1 | Accepted-AOC Lowest quoted |
| 2 | L2₹2.5 L+₹4,358.57 (1.80%)Rejected-AOC ALAPPUZHA | ALAPPUZHA | KERALA | 686534 | ₹2.5 L+₹4,358.57 (1.80%) | L2 | Rejected-AOC Highest quoted |
| 3 | Rejected-Technical 200 25 MAINTENANCE OF F W C THRU VALLOOR W 9 | MEDINIPUR WEST | WEST BENGAL | 721101 | - | - | Rejected-Technical Highest quoted |
| 4 | Rejected-Technical ALANGAD GRAMA PANCHAYATH PIN 683 511 | ERNAKULAM | KERALA | 683511 | - | - | Rejected-Technical Highest quoted |
| Sl No | Description | Qty | Unit | CHANDRAN K K L3 | SUJITH BHASKARAN L1 | JOLLY T V L4 | Varghese Antony L2 |
|---|---|---|---|---|---|---|---|
| 1.00maintenance | |||||||
| 1.00 | OD274474/2025-2026::Providing and fixing 200 mm wide square uPVC rain water gutter including all
necessary fittings and making all necessary connnections complete as per the direction of engineer in
charge at site | 15 | metre | 470.91 ₹7,063.65 | 400 ₹6,000 Lowest | 450 ₹6,750 | 448.84 ₹6,732.6 |
| 1.00 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | 20 | metre | 286.17 ₹5,723.4 | 300 ₹6,000 | 280 ₹5,600 | 272.76 ₹5,455.2 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 30 | sqm | 790.77 ₹23,723.1 | 800 ₹24,000 | 790 ₹23,700 | 753.72 ₹22,611.6 Lowest |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 492 | kilogram | 109.57 ₹53,908.44 | 116 ₹57,072 | 140 ₹68,880 | 104.44 ₹51,384.48 Lowest |
| 1.00 | 15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix) | 1.8 | cum | 1,459.61 ₹2,627.3 | 1,000 ₹1,800 Lowest | 1,700 ₹3,060 | 1,391.21 ₹2,504.18 |
| 1.01 | 51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | 3.38 | cum | 854.09 ₹2,882.55 | 1,000 ₹3,375 | 900 ₹3,037.5 | 814.07 ₹2,747.49 Lowest |
| 1.01 | OD274850/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paverblock of M -
30 grade made by block making machine with strong vibratory compaction, of approved
size,design & shape, laid in required colour and pattern over and including 50 mm
thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-incharge. | 45 | sqm | 997.44 ₹44,884.8 | 1,000 ₹45,000 | 1,050 ₹47,250 | 950.7 ₹42,781.5 Lowest |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.66 | cum | 8,672.58 ₹5,723.9 | 8,000 ₹5,280 Lowest | 9,000 ₹5,940 | 8,266.19 ₹5,455.69 |
| 1.01 | OD285298/2025-2026:mancoolies | 5 | each | 1,016.17 ₹5,080.85 | 1 ₹5 Lowest | 1,200 ₹6,000 | 968.55 ₹4,842.75 |
Tender Value
₹2.8 L
EMD Value
₹6,877
Closing Date
17 Oct 2025, 2:00 pmClosed
Anju Antony
AE, LID EW, ALANGAD GP
Annual Plan-pro no 79/2025 Homeo hospital maintenance-MAINTENANCE -General Civil Work
2025_LSGD_807689_1
79/26/AE/ALGD/6
Open Tender
Civil Works - Buildings
Item Rate
180 days
ALANGAD GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹610
Yes
₹6,877
Yes
21 Jan 2026
10 Oct 2025
18 Oct 2025
10 Oct 2025
17 Oct 2025
10 Oct 2025
Amount
maintenance
OD274474/2025-2026::Providing and fixing 200 mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site
50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)
51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
OD274850/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paverblock of M - 30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-incharge.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
OD285298/2025-2026:mancoolies
50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
OD296086/2025-2026:Nursery Art work painting like scenery ,picture, letter, cartoons etc using synthetic enamel paint of approved brand and manufacture of required colour to give best perfection to the picturesover and including base coat of synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (exculding primer) OD 85/21-22One coat
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
Varghese Antony (BID ID -2393414)
CHANDRAN K K (BID ID -2394327)
JOLLY T V (BID ID -2391294)
Bidder Name
CHANDRAN K K
JOLLY T V
Varghese Antony
SUJITH BHASKARAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .