Loading…
Loading…
Tender Value
₹8.4 Cr
EMD Value
₹16.8 L
Closing Date
5 Jun 2026, 3:00 pmClosed
Improvement of staff quarters under ADEN/HQ/JU
57of2026-27
57of2026-27
Open
12 Months
Unknown (Unspecified Location)
₹0
₹16.8 L
14 May 2026
14 May 2026
22 May 2026
B-All Items of USSOR 2021 Railway Formation works, Bridge work,& P
Item Breakup - A-All Items of CPWD-DSR-2023
40 gms 18.65 Providing and fixing PTMT soap Dish Holder Each 50 111.45 5572.5 having length of 138mm, breadth 102mm, 109 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 110 19.1.2 150 mm diameter Metre 250 695.8 173950 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone 19.2 aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 111 19.2.2 150 mm diameter S.W. pipe Metre 250 1179.85 294962.5 Providing and fixing in position pre-cast R.C.C. 19.19 manhole cover and frame of required shape and approved quality 19.19.3 H D - 20 112 19.19.3.1 Circular shape 560 mm internal diameter Each 100 1675.7 167570 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 250 495.05 123762.5 113 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 200 598.6 119720 114 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 40 1139.3 45572 115 lamination on one side and balancing lamination on other side JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 100 1176.8 117680 116 (weight not less than 10kg/sqm) 21.17 Providing and fixing anodised aluminium grill Kg 200 638.35 127670 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 117 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 50 8042.3 402115 118 sand : 4 graded stone aggregate 20 mm nominal size) Total 79678034.60
Item Breakup - B-All Items of USSOR 2021 Railway Formation works, Bridge work,& P Way works
JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 43201.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS11GCC.pdf
ATTACHMENT
FinalSTDWorks12.2.20191.pdf
ATTACHMENT
GCC 2022
ATTACHMENT
CorrigendumintenderdocumentJU01052023.pdf
ATTACHMENT
ACSno1to6inGCC20221.pdf
ATTACHMENT
ACSno7to10inGCC20222.pdf
ATTACHMENT
ClarificationregardingsubmissionofAnnexure-VofGCC90024.pdf Annexure V discontinuation
ATTACHMENT
Correction slip no 10
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.221.pdf
ATTACHMENT
ClarificationregardingsubmissionofAnnexure-VofGCC90024.pdf
ATTACHMENT
SeekingclarificationonapplicabilityofGCCCorrectionSlipNo1024-06-20258.pdf
ATTACHMENT
Download all tender documents and submit your bid