SEOP 33/2021-22

Amount

HT Line

Prov. ST Pole 9 Mtr. Long W/L 200 kg

Prov. RCC Muff of 2000 mm length

Prov. C.I. X-Arm for GO switch & DO fuse unit 2800x100x50mm(8Nos.)

Prov. C.I. X-Arm for Single Pole Structure 1500x100x50mm(3 Nos.)

Prov. C.I. X-Arm for Double Pole Structure 2400x100x50mm(4 Nos.)

Prov. AI Knee bracing set 2x (750x50X50) mm for single pole(6 Nos.)

Prov. X-Bracing Setoff size 2(2700x50x50x6mm ) + (1500x50x50mm) for double pole(6 Nos)

Prov. Disc insulator set with helically formed fitting i.e Dead end Clamp & Ball Cleave Socket

Prov. Pin Insulaters

Prov. G.O.Switch 400 A

Prov. Barbed Wire

Prov. D.O.Fuse

Prov. Triffer 5 Ton

Prov. HT Stay Set complete fitting

Prov. Stay Wire 7/3.15 mm ( @ 6.0 kg Per Stay Set)

Prov. Coil Earthing set for Steel Pole i.e pipe 40 mm Dia,3000 mm long with Base plate.

Prov. Danger Plate(250X200X1.6 mm)

Prov. M.S. Nuts and Bolts (Off Sizes)

Prov. Full Clump

Prov. Half Clump

Prov. Aluminium Paint

Prov.AAA Cond.7/4.26 mm

Prov. GI wire 8SWG

250 KVA S/Stn

Prov. 11/0.4 kV,250 KVA Distribution Transformer

Prov. S/T Pole 9Mtr. W/L200 kg

Prov. RCC Muff of 2000 mm length

Prov. C.I. X-Arm (2800X100X50 mm) for Transformer base

Prov. C.I (460X100X50 mm) for supporting Main Channel of T/F and GO Switch (3Nos.)

Prov. Transformer Belting

I) A.I (2800X50X50 mm)

II) A.I (460X35X35 mm)

Prov. C.I. for Fuse Unit/AB Switch &CT/PT unit(2800X75X40 mm) 6 Nos.

Prov. A.I X Arm for Lightning Arrestor & distribution panel box (3x2800X50X50 mm)

Prov. G.O.Switch 400 A

Prov. D.O.Fuse

Prov. Lightning Arrestors

Prov. Disc Insulator Fitting

Prov. Stay Set complete

Prov. Stay Wire 7/3.15 mm ( @ 6.0 kg Per Stay Set)

Prov. AAAC 7/3.15mm for eathing

Prov. Pipe Earthing

Prov. LT Distribution Panel Box with MCCB(630A,50KA,4P,1No.) &SFU(100A,9No.rewirable)

Prov. Half Clamp (M.S. Flat 50X6 mm)

Prov. Full Clamp (M.S. Flat 50X6 mm)

Prov. M.S. Nuts and Bolts (Off Sizes)

Prov. aluminum Thimble

Prov. aluminum Thimble

Prov. Lead-Tin Solder (60:40)

Prov. Solder Flux

Prov. Danger Plate

Prov. Barbed Wire

Prov. LT Cable (copper),415 volts single core, 150mm2

Prov. Shackle insulator for earthing

Prov. CT/PT combined unit with energy meter 100/5 Amp.

Prov. Control cable(12 core).

Prov. Aluminium Paint.

3-PH. LT for stage-I

Prov. Steel Poles 9mtr long

Prov. Muffs of 1800 mm length

Prov. C.I. X-arm (600x70x40)mm

Prov. Shackle Insulator

Prov. D-Iron

Prov. X-arm clamp

Prov. Egg insulator

Prov. Eye hook bolt

Prov. LT Stay Set

Prov. Stay Wire 7/3.15 mm (@ 6.0 kg Per Stay Set)

Prov. Coil earthing

Prov. G.I. wire 8 SWG for earthwire.

Prov. Nuts and Bolts (off Sizes).

Prov. Aluminium Paint

Prov. PVC spacer

Prov. Cost of conductor (AAAC) (including cutting & sagging) 7/3.15mm2 (50mm2)

CIVIL

Excavation in foundation and trenches etc. in earth work lift upto 1.5 mtrs stacking the excavated soil not more than 3 mtrs clear from the edge of excavation and then disposing of all surplus excavated soil within a lead of 20mtrs in pick & jumper work (50% each).

P/L cement concrete 1 : 6 : 12 ( 1 cement, 6 sand, 12 graded stone aggregate 40 mm NS) and curing complete in foundation and plinth.

Providing and laying cement concrete 1:2:4( 1 cement, 2 sand, 4 graded stone aggregate 20mm NS) and curing complete

Form work with steel plates 3.15mm thick welded in frame 30*30*5mm angle iron for foundation, footings basis of columns etc. and mass concrete.

Providing Tor/Mild steel reinforcemnt i/c bending, binding and placing in postion complete.

P/L R.C.C. 1 : 2 : 4( 1 cement, 2 sand, 4 graded stone aggregate 20 mm NS) and curing complete, excluding cost of form work and reinforcement.

Boulder filling dry hand packed tightly as in wire crate under floors

Steel work welded in built up sections, trusses, angles, frame work i/c cutting, hosting & fixing in position and applying priming coat of red lead oxide. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main andcross beams,hip and jack rafters,purlins connected to common rafters and the like.

Supplying and fixing expended metal to wood or steel members in partitions etc..Weight not exceeding 3kg.per square metre.

Painting (two coats) on new steel or steel based metal surface.

20mm thick cement plaster in single coat in cement mortar 1:5 (1 cement, 5 sand).

Cement concrete flooring 1 : 2 : 4( 1 cement, 2 sand, 4 graded stone aggregate 20 mm NS) (50mm thick).

P/F oxidised M.S. Sliding door bolt with nuts and screws etc. complete (250*16mm)

P/F oxidised M.S. handle with necessary screws etc. complete (125mm)

S.S. Enterprises

M/S DEVARYA ENGINEERING

DHARAMSHALA ELECTRICAL

MS Sonu Kumar A Class Govt Cont