REPAIRS TO CERTAIN FURNITURE INCLUDING TP AND BRANDED FURNITURE AT MIL STN KOTA

Amount

CHARPOY GI PIPE WITH PLYWOOD, Drg No FD-220

Removing old broken GI long rail 32mm bore from charpoy and S&F new long rail in position made out of GI pipe 32mm bore medium grade duly threaded on both ends, size as per drawing, complete all as specified and as directed. Note :- Above quoted rate shall be inclusive of tightening of loose GI elbow, if required at site.

Removing old broken short rail and fixing short rail of old GI pipe 32 mm bore medium grade made from the broken long rail as retrieved from Srl item No 1.01 (here-in-before) duly threaded on both ends, size as per drawing, complete all as specified and directed.

Removing old broken legs & fixing leg made of old GI Pipe 32 mm bore medium grade made from the broken short rail retrieved vide Srl item No 1.02 (here-in-before) by cutting and threading required including clamp made from 25 X 3 mm thick flat iron for MNF set and 3mm thick MS plate of 40 mm dia, welded to the bottom of legs complete all as specified and directed.

Removing broken/unserviceable GI check nut from charpoy GI Pipe and providing new GI check nut of 32mm dia for charpoy GI pipe complete all as specified and as directed.

Taking out old unserviceable GI elbow from GI pipe charpoys including opening of MS flat iron and supply and fixing new GI elbow 32 mm bore 3 way, ISI marked and also refixing of MS flat iron, complete all as specified and as directed.

Removing broken/unserviceable MS flat iron from GI pipe charpoys and supply and fixing new MS flat iron of size 35mmx4mm of 900mm long, complete all as specified and as directed.

Removing old unserviceable plywood top from charpoy GI pipe & tightening complete charpoy and supply and fix 12mm thick plywood, commercial type, BWR grade, size 1980 x 900 mm, including nuts and bolts etc as required at site, complete all as specified and directed.

Hat Stand with Mirror (Drg No.FD-233, 361, 1110)

S & F in renewal of 5 mm thick electro copper plated mirror totally free from distortion, frame in teakwood beading alround, complete all as shown on drawings, specified and directed.

S & F in renewal of back ply of Hat stand made of 6mm thick commercial type BWR grade plywood, complete all as shown on drawings, specified and directed.

S & F in renewal of pegs/hooks of Hat stand, made of brass, bright finish, superior quality, shape and size all as shown on drg, complete all as specified and directed.

Chair Dining (PVC Seat) , Drg No.FD/MAP-II/05

Removing of old unserviceable following parts from chair dining (PVC seat) and supply & fixing new parts made of first class hard wood (Shisham/teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - Front leg

Rear Leg

Front/rear/side rail

Bottom Stiffener (side/centre)

Supply and fixing in renewal of 4 mm thick PVC seat of chair dining in proper size & shape, complete all as shown on drawing and as specified. Make of seat - Amko/Confo/Harmony or Equivalent as approved by the GE

Chair Dining Officer/Long back, Drg No.FD/MAP-II/04, 357

Removing of old unserviceable following parts from chair dining MAP/cushioned and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - Front leg

Rear Leg

Front/rear/side rail

Top back rest

Vertical back stiffner

Bottom Stiffener

S & F tapestry cloth for existing cushions of chair covered the cushion duly stiched with superior quality tapestry cloth, complete all as specified, directed and shown on drawings. Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the GE.

Supply and fixing in renewal of seat cushion of chair dining made of 75 mm thick 40 Kg/Cum density foam with tapestry cloth in proper size & shape, complete all as shown and specified on drg. Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the Engineer in Charge.

Chair Varandah (PVC Seat and Back), Drg No.FD/MAP-II/06

S & F in renewal of 4 mm thick PVC seat and back of chair varandah in proper size, (Weight of seat or back shall not be less than 1.85 kg each) complete all as specified and shown on drg. Make of seat and back :- Amko/ Confo/ Harmony or Equivalent as approved by the GE.

Supply and fixing in renewal of new Hard PVC shoe of best quality of chair verandah, complete all as specified and shown on drg.

M&L for spray painting of one coat of 1st quality synthetic enamel paint (colour shade as approved by GE) over & including a coat of red oxide primer after preparation of surface by scrapping with sand paper, removing dust & including denting and welding to cracked joints as required complete all as specified, shown on drawing and directed.

S&F in renewal of leg of chair verandah made of 20 mm dia MS conduit pipe of 1.6 mm wall thickness (U shape), duly welded with existing shape and size including applying one coat of synthetic enamel paint over a coat of red oxide zinc chromate primer after preparation of surfaces, complete all as specified and as shown on drawing.

Table Dressing Gents (MAP) Drg No.FD/E6/MAP/16

Supply and fixing in renewal of 1150mm(H) x 450mm (W), x 5 mm thick electro copper plated mirror totally free from distortion, including frame made in teakwood, size of frame 25 x 38mm alround and including 12mm thick BWR grade phenol bonded plywood type in the back of table dressing gents (MAP), all as shown on drawing, complete all as specified and dircted.

Supply and fixing in renewal of glass shelf made of 5mm thick glass of superior quality complete all as shown and specified on drg and dircted.

M & L for renewal anyone of sides of mirror dressing gents map made of pre-laminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick complete all as shown and specified on drg and dircted.

Supply and fixing in renewal of hinges of mirror dressing gents made of 3mm thick MS sheet complete all as shown and specified on drg and dircted.

TABLE BED SIDE (MAP), FD/E6/MAP/15(R)

S&F in renewal of broken MS square pipe (18 gauge) with new 18mm MS square pipe including black painting, complete all as shown on drg and as directed.

S&F in renewal of broken handle from table bed side (MAP), with new SS handle chromium plated (size as per existing) of superior quality on both the drawers and fixed in existing position, complete all as shown on drg and as directed.

S&F in renewal of top of table bed side (MAP) made of 18/19 mm thick prelaminated melamine face particle board mailamine/ teak face, exterior grade & other side white face & including alround 4 mm thick teakwood edging, complete all as specified, shown on drawing and as directed.

S&F in renewal of upper shelve of table bed side with & including telescopic channel complete all as per shown on drawing and as directed.

S&F in renewal of lower shelf of table bed side with & including telescopic channel complete all as per shown on drawing and as directed.

S&F in renewal of back side ply from table bed side (MAP) made of 6mm thick commercial ply, BWR grade & fixed in back side of table, complete all as specified, shown on drawing and as directed.

S&F in renewal of shoe of table bed side with new hard rubber/PVC shoe of superior quality of existing size and shape, complete all as specified, shown on drawing and directed.

Chair school with hand rest, FD/E6/MAP/05

S&F in renewal of PVC seat of chair school with hand board with new PVC seat in single piece of superior quality, fixed to chair, complete all as specified, shown on drawing and as directed.

S&F in renewal of hand rest top openable fixed on right hand side, complete all as specified, shown on drawing and as directed.

S&F in renewal of shelf below the seat, complete all as specified, shown on drawing and as directed.

M & L for spot welding of broken iron part in chair school with hand board & including removing excess welding material and preparation of surface of chair school and applying spray painting one coat of synthetic enamel black paint over & including one coat of red oxide primer complete all as specified, shown on drawing and directed.

Dual Desk (for class I to V) (CWE/ KOTA/ 1R/ 2013)

S&F in renewal of Top of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of shelf of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of front side of dual desk made out of 18 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of seat of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

M&L for electric spot welding of broken joints of 25mm square pipe, 1.6mm thick with 02 Nos of seat/back support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of shoe of Dual Desk with new hard rubber/PVC shoe of superior quality of existing size and shape, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of primer wherever required complete all as specified, shown on drawing and directed.

Dual Desk (for class VI to VIII) (CWE/ KOTA/ 2R/ 2013)

S&F in renewal of Top of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of shelf of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of front side of dual desk made out of 18 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of seat of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of back rest of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

M&L for electric spot welding of broken joints of 25mm square pipe with 02 Nos of seat/back support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of shoe of Dual Desk with new hard rubber/PVC shoe of superior quality of existing size and shape, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of primer wherever required complete all as specified, shown on drawing and directed.

Dual Desk (for class IX to XII) (CWE/ KOTA/ 3R/ 2013)

S&F in renewal of Top of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of shelf of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of front side of dual desk made out of 18 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of seat of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of back rest of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

M&L for electric spot welding of broken joints of 25mm square pipe, 1.6mm thick with 02 Nos of seat/back support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of shoe of Dual Desk with new hard rubber/PVC shoe of superior quality of existing size and shape, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of primer wherever required complete all as specified, shown on drawing and directed.

POLISHING OF WOODEN ITEMS

M&L for preparation of old previously treated exposed (Inside and outside) wooden surfaces by electric grinder/ scraping and filling bore holes with putty and finally rubbing with sand paper/abrasive cloth thoroughly for smooth and clean surface and applying one or more coats of french polish and over it and applying a coat of clear glossy wood finish (Touchwood), complete all as specified and as directed for the following wooden furniture articles: -

Hat Stand with mirror

Chair dining Officer/Long back

Chair dining JCOs/OR (Map)

Mirror dressings Gents

Shri Maruti Trading Co. (BID ID -3142270)

Lalit and Brothers (BID ID -3131404)