SPECIAL REPAIR TO BUILDING NO. P-16 AT NAUVEER NAGAR AND 02 WC AND TOILET INCLUDING WATER TANK OVER SHED FOR SENTRY POST

Amount

Taking down cement or cement plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc. To receive new plaster complete all as specified and directed

M&L Rendering 15 mm thick in CM 1:6 on surfaces or surface other than fair face of brick-work or on one side of lathing of stone masionary or concrete surfaces finished even and smooth without using extra cement, Complete all as specified and directed.

M&L for 12 mm thick modified polymer ready mix plaster to Concrete surfaces wall finished even and fair with 3 % of weight of cement WPC , complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying 1 coat of wall care white putty, 1-2mm thick and further applying 2 coats of oil emulsion distemper over a coat of wall priming paint complete all as specified and as directed.

M&L for Preparation of new plastered surfaces in walls soffits, facia roof and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. at any height including necessary scaffolding etc complete all as specified and directed of weather coat primer all as specified.

Complete removal of existing treatment of wall ( any no. of layers) and making surface even and smooth to receive two coats of anti fungal weather proof acrylic based paint 100% acrylic over coat of exterior wall primer after preparation of surface of at any height including necessary scaffolding etc. complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing of rubbish complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles in vertical surface 300x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile including 15mm thick screed in cm (1:4) as in skirting/dado complete all as specified and directed

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, (300x300mm) in floors etc. set and jointed in neat cement slurry including 20mm thick screed 1:4 as in flooring complete all as specified and directed

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and including 20mm thick screed 1:4 as in flooring complete all as specified and directed.

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting /DADO etc. set and jointed in neat cement slurry including 15mm thick screed 1:4 as in flooring complete all as specified and directed

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

M&L for coloured glazed ceramic tiles of size350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar .

M & L 16-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M & L Marble work 16 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, skirting and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types, including 20mm thick screed bed in CM 1:4, jointed and pointed with grey cement slurry and pointing with white cement (1:3) using marble dust with admixture of pigment to match with shade cutting and polishing etc complete all as specified and directed

Demolition of PCC (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level)

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate for plinth protection with finishing cement concrete surface even and smooth Without using t extra cement omplete all as specified and directed

Cleaning of existing surface of Bathroom of 1.50 x 1.00 Sqm or WC of 1.20 x 1.15 Sqm with wire brush removal of all dust & grit of sunken floors, providing 10mm thick rendering in CM 1:4 using WPC at the rate of 3% by wt of cement, one coat of hot blown bitumen VG10 grade @ 1.2 Kg/Sqm on all plastered surface and providing PCC 1:2:4 type B-1 with WPC in slope towards outside, min thickness of PCC is 25mm & max 75mm providing 40mm dia PVC spout of lenth 50cm complete and tested for leakage, seepage and filling with lime concrete or lean concrete 1:5:10 using bricks bat complete all as specified and directed.

Taking down aluminium sliding window /ventilator including glass complete all as specified and directed.

S& F powder coated aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat and necessary fitting (handle, locking arrangement, stoppage) for fixing etc. complete all as specified

Taking down wooden chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified

Taking down wooden chowkats or frames exc 1.5sqm but not exc 4sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified

Taking down and refixing in same opening after resecuring or easing and adjusting size of shutter exc 01 Sqm but not exc 02 sqm each

S&F PVC door solid frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails MS frameshall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap insertfor top rail and bottom rail, panelling of plain of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet beading and joined together with solvent cement supplying l and fixed in the frame at site as per specification and drawing.

S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats

S&F 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Overall length of cover plate 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete

S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete

S & F of 100 mm long stainless steel butt hinges, medium weight approved make ISI marked

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F Aluminium handles 150mm long anidised aluminium , cast type, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth including knotting and stopping and applying 2 coats of synthetic enamel paint over a prink primer (any tint/Shade) complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified

S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 100mm size complete all as specified and directed

S&F for 19/20mm Pre laminated interior grade Particle Board both sides laminated complete all as specified

S & F Continuous (piano) hinges,Width of flaps (when open) 30 mm mild steel, bright finish or electrogalvanised

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description.

S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

Taking down aluminium decogrill of any size and any type all as specified

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 103 or equivatent 6.5 mm thick all as specified and as directed

S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane all as specified and as directed

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long

S&F in repair 25mm dia Stainless Steel curtain rod etc complete all as specified and directed

S&F in repair statinless steel bracket for curtain rod of 25mm dia for fixing in walls etc complete

Demolition and breaking up drain pipes 110/75mm of PVC SWR pipes laid in floor/wall complete all as specified

S&F of PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls

S&F of PVC (SWR) bends 110mm dia access to door complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal access to door

S&F 110mm PVC (SWR) vent cowl.

S&F 75mm PVC (SWR) vent cowl.

S&F 75mm bore PVC SWR pipe single socketed in any length with rubber ring joints laid in in floor/wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bands any radious complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal access door..

M&L in 75 mm out let PVC floor trap, plain with openable (two piece type) grating including jointing with solvent cement.

M&L in 125/110 mm PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement.

Taking up or down steel tubing of 20 mm bore and connections

Taking up or down steel tubing of 25 mm bore and connections

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 25mm inclluding fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per dmanufacturer's instruction fixed on wall /ceiling complete all as specified and directed

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 20mm inclluding fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per dmanufacturer's instruction fixed on wall /ceiling complete all as specified and directed

S&F stailess stell plate rack of size 90x75x25cm depth made out of 0.80mm thick sheet complete all as specified and directed

S&F in repair sink with drainage board made of stain finish 1 mm thick kitchen or laborator with plugs washere and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets overall size 915mm x460mm bowl size 410 mm x330mmx160mm complete all as specified and directed

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S & F Toilet paper holder, vitreous China,box type

S&F in repair 10 Litres, PVC valvless,syphonic action type, flushing cistern, low level, white, with inlet, ball vlave, float and handle including bracket complete all as specified and directed

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps, waste coupling and waste pipe.including cutting for and pinning in ends of brackets or recting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed

S&F grating square 150 mm size of PTMT openable type.

S&F PVC waste pipe suitable for wash hand basin/sink including fixing arrangement

S&F 32 mm bore waste coupling of PTMT (half of full thread) complete all as specified and directedand as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm

S&F in repairs Fancy type bib taps, long shank chromium plated cast copper alloy 15mm bore with crutch screwed down and fixed complete all as specified and as directed.

S&F in repairs long shank CP Pillar taps 15 mm dia but fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly-nuts , screwed for pvc pipe and fixed complete all as specified and directed

S&F in repairs 15mm dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch , screwed at both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 120mm dia chromium plated overhead shower with arm complete all as specified and as directed

S & F in repair soap dish, fixed to tiled wall surfaces with plugs and chromium plated brass screws complete all as specified and as directed.

S & F Brass chromium plated tubular towel rod 600mm long complete all as specified and as directed

S&F 20mm thick granite machine cut corner shelf of dia 25cm (inner quarter circle shape) nosing and polishing complete fixed to wall in CM 1:3 mortar complete all as specified and as directed.

Dismantling of water storage tank of exc 250 ltrs& n exc 500 ltrs capacity complete all as specified and as directed

S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixedcomplete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia etc and making good with any slab and in any position finished the surface even and smooth without using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and match with the existing surface complete all as specified and directed

M & L for Chipping and removal of spalled concrete, cracked, porous and weak concrete up to a depth of the reinforcement rods or depth of carbonation whichever is deeper and cleaning of the reinforcement bars and exposed concrete to remove scales by chipping, wire brushing, emery sheets etc to enable the measurement of reduced dia of the bar, application of zinc primer to the reinforcement on all sides of the reinforcement and application of epoxy bonding agent to exposed old concrete surfaces. The job shall be carried with contractors own pneumatic chipper / manually with all required resources, tools and tackels up to the satisfaction of EIC. payment towards application of zinc primer and epoxy bonding agent shall be paid in respective item rate of contract complete all as specified and directed

Providing and placing in position Micro - Concrete as per relevant ASTM / BS / IS having comp. strength of min 45 mpa at 2 days of make PIDILITE/ BASF/SIKA/FOSROC or equivalent in columns and beams, which shall be pre-packed single component, chloride free, non shrink, free flow, self compacting and mixed as per manufacturere spacification, including required leak proof shuttering, pre - soaking of substrate, manual application or pumping, manpower and tools & tackles all complete all as specified and directed

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal or rubbish to the dumping ground within 50m lead With cement mortar 1:4 (1Cement:4Coarse Sand) complete all as specified and directed

Taking down / Demolition of old textile covering form roof (old WPT) complete all as specified and directed.

M&L PCC type B-1. 1:2:4 (20 mm graded aggregate) as in Padding concrete to over roof slab 40 mm thick mixed with WPC 3% by weight of cement, finished even and fair. (WPC shall be measured and paid separately).

M & L Rendering 10 mm thick rendering in CM (1:4) over PCC padding surface finished even & smooth using extra cement with WPC @ 3% by weight of cement complete all as specified and directed (integral WPC will be measured separately)

Supply only integral waterproofing compound complete all as specified and as directed.

water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions.

M&L for PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges finish surface even and smooth including form work complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any type / gauge, thickness and any patten of roof coverings, hanger door, hanger roof complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Eng-in-Charge.

S&F Rolled MS steel work in tubular trusses and tubular posts, rafter, purlin including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded ST 240 complete as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar all as specified and as directed by Engr-in-Charge.

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for.

M & L stone kerb of roughly squared stones of size 20cmx30cm dressed so that the maximum depression from straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces, jointed in cement mortor 1:6 and struck flush, including embedding stones in the ground to depths indicating and tamping ground around stones and also removing any surplus spoils, etc. complete all as specified and as directed

M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation complete all as specified and as directed

M&L for machine pressed precast concrete rubberised inter locking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade complete all as specified and as directed

M&L for preparation of new painted surfaces and applying two coat of synthetic enamel on brick, stone, concrete, asbestos cement or plaster surface complete all as specified and as directed

Surface excavation n.exc 30 cm deep & averaging 15 cm deep getting out in soft/ disintegrated rocks as specified & as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, manholes, etc. or for laying cables/pipes, erecting poles etc. n exc 10 sqm on plan and getting out in soft/ disintegrated rock complete all as specified and as directed

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all specified and directed.

Removing excavated material to a distance exc 500mtr and not exceeding 1.5 Km and depositing outside MoD land complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed as in rock complete all as specified and as directed

Demolition and breaking up drain pipes 300mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar in floors including excavation and removal of soil complete all as specified and as directed

M&L for Concrete bed Type D2 1:4:8 to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed

M&L for reinforced concrete pipe of 200mm bore of pipe, class NP-2, laid and jointed with collars complete all as specified and as directed

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in manhole cover with plain fair surface including chamfers, weatherings, throatings, necessary form work and set in CM (1:6), placed in position complete all as specified and as directed

Cutting into existing manholes of 225mm internal dia of pipes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and as directed

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in copings, benching, and the like including weathering, sightly rounded or chamfered angles and throating complete all as specified and as directed

M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed by Engineer-in-Charge

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for RCC M30 design mix (20 mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like etc all as specified and as directed by Engineer-in-Charge

M & L for RCC M30 design mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L, Flat fair finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc all as specified & all as directed by Engineer-in-Charge

M&L Formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc.

M&L Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide

M&L, Pre-cast cement concrete block masonry type C1 (1:3:6) using 20mm graded stone aggregate set in CM 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

M&L, Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1 (1:3:6) using 20mm graded stone aggregate set in CM 1:4 complete all as specied and directed.

M & L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr all as specified and as directred

M & L for 40 mm thick DPC in cement concrete 1:2:4 type B0 to horizontal or vertical surfaces including necessary formwork

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hard core of gauge exc 63 mm but n.exc 100 mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base.

M&L, Rendering 15 mm thick on fair faces of brick, block masonry or concrete surfaces with in CM 1:4 on wall with water proofing component all as specified & directed. Note : WPC measered and paid seperately

M&L, Rendering 15 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) wall all as specified & as directed by Engineer-in-Charge

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

S&F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F, 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F 3mm thick Figured glass, pin head type and glazing in squares n exc 0.5 sq.m in each pane

M&L for preparation of new surfaces of plastered or unplastered of wall and application of three coat of white washing.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia.

Supplied and fixed stop valve 15 mm dia cast copper alloy CP Fency type with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

S&F, 32 mm dia low density polythelens (LDPE) pipes of prerssure rating 6 Kgf/Sq cm

S&F vitreous chinaware EWC pedestal type closet with white seat & cover with flat bottom with hinging device all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F, Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed

S&F, in repairs, Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing or concealed conduite wiring, etc. and making good, cutting exceeding 20cm girth, completed all as specified and directed.

Supplying and laying of CPVC pipes outer dia 20mm SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, 15mm bore dia of pipe complete all as specified and directed.

S&F, Towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.

Cuting into existing manholes for connecting new drain making good to pipes and rendering, cutting out existing benching forming branch channel 1/2 round 3/4 section in cement conrete 1:2:4 type B1 smooth finished for 200mm bore pipe.

M&L Concrete bed to drain pipes 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) including packing under, and haunching against the side of pipes after they are laid and tested for 200mm internal dia of pipe.

M&L for reinforced concrete pipe of 200mm bore of pipe, class NP-2, laid and jointed with collars complete all as specified and directed.

M&L for walling of random rubble un coursed, well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto course with maximum depression on face from straight edge held against the dressed surface not.exc. 20mm for sand stone complete all as specified and directed.

Providing Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in copings etc and like including weathering slightly rounded or chamfered angles and throating as directed.

Providing pre-cast Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc) and similar articles, set in CM (1:4).

M&L for PCC 1:3:6 Type C-2 using 40mm graded stone aggregate as in sub bases, foundation, filling all as specified & directed by Engineer-in-charge.

M&L for even spreading of 50mm thick layer of sand cushioning incl watering & consolidation all as specified & directed by Engineer-in-charge.

M&L for machine pressed precast concrete inter locking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed by Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever reqd complete.

M&L two coats of synthetic enamel paint (ordinary tint) over priming paints plaster coat to newly concrete surfaces including preparation of surfaces as specified & directed by Engineer-in-charge.

Supply Repair/Replacement Laying and Testing of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fittings and making connection fixed complete to walls, ceilings floors or laid in trenches etc. of 32 mm dia laid in trenches complete all as specified and directed.

Supply Repair/Replacement Laying and Testing of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fittings and making connection fixed complete to walls, ceilings floors or laid in trenches etc. of 25 mm dia laid in trenches complete all as specified and directed.

Supply Repair/Replacement Laying and Testing of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fittings and making connection fixed complete to walls, ceilings floors or laid in trenches etc. of 16 mm dia laid in trenches complete all as specified and directed.

Supply and Repair/Replacement of CPVC ball valve valve 32 mm bore complete all as specified and directed.

Supply and Repair/Replacement of CPVC ball valve valve 25 mm bore complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulaters, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly drawing into and including rigid non-metallic PVC conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories by cutting of chases in wall/roof/floors concealed in walls/roof/floors with MS sheet metal/PVC sunken modular switch/Terminal box 1.2 mm thick and Modular plate and screws with cup washers all as directed and specified Note : (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light/fan/bell point.

All as per item No 181.00 above but one light point for 2 way switch board.

All as per item No 181.00 above but for 5 amps socket outlet on same board board.

All as per item No 181.00 above but One 3 pin socket outlet, 5 Amps,independent borad complete all as specified andas directed.

All as per item No 181.00 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified andas directed.

All as per item No 181.00 above but One 3 pin socket outlet with 2.5 sqmm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

All as per item No 181.00 above but for one AC Point with 4 sq mm PVC unseathed (FRLS) wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge. Note : Seprate circuit of individual point will be drawn from the DB directly for AC Point complete all as specified and as directed.

M&L for and Repair/Replacement for Sub main wiring power/circuit using PVC insulated unsheathed FRLS, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through in and including PVC conduit concealed in walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 6 sqmm and one wire of 6 sqmm & PVC conduit shall be measured as one unit.

M&L for and Repair/Replacement for Sub main wiring power/circuit using PVC insulated unsheathed FRLS, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through in and including PVC conduit concealed in walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 4sqmm and one wire of 4 sqmm & PVC conduit shall be measured as one unit.

Supply and Repair/Replacement of ceiling rose surface backelite 65x50 mm having 3 terminal complete all as specified and directed..

Supply and Repair/Replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

Supply and Repair/Replacement of Lamp 10 Watt LED complete all as specified and as directed by Engr-in-Charge.

M&L for SPN Sheet metal enclosures with plug and socket with Top and MCB SP 20 Amps including taking down the same. all as specified and directed by Engineer - in - Charge.

M&L for taking down and refixing for after Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for taking down and refixing for after Painting of Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for taking down and refixing for after Painting of Geyser complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

Repair/replacement of Flexi connection pipe accessory 450mm for water heater any type/capacity complete all as specified and directed

M&L For breaking the existing wall to make hole for exhaust fan and making good to the disturbed surface of wall complete all as specified and directed at site.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as spcified and as directed

Supply and fixing Repair/Replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed

Supply and fixing Repair/Replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and Repair/Replacement of Decorative wall light made up of high grade engineering plastic material suitable for retrofit CFL 20 W . with all connected accessories internally pre-wired, including 9 W LED bulb connecting lead of 3 core 1.5sqmm flexible copper wire 1.5sqmm from ceiling rose to fitting complete all as specified and as directed.

Supply and Repair/Replacement of Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable of GI pipe (light grade) bracket and clamps,nut bolts are fixed on wall/post and all as required and directed.

Supply and Repair/Replacement of for Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of for Modular switch 2 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of for Modular switch 1 way 16 Amps, 1 modules 230 volts Complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A, 2/3 pin combined, 2 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A/16A, 2/3 pin combined, 2 modules 230 volts complee all as specified and directed.

Supply and Repair/Replacement of bell push 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of call bell Multi musical type complete all as specified and as directed

Supply and Repair/Replacement of five step fan Modular regulator 2 module 230 volts complete all as specified and directed.

Supply and Repair/Replacement of MCB DB Single pole and neutral 12 way 240V double door Complete all as specified and as directed.

Supply and Repair/Replacement of MCB TPN DB 4 way 415V double door Complete all as specified and as directed.

Supply and Repair/Replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity SP 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement Supply and fixing SPN 40 amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement Supply and fixing SPN 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement of 63 amp TPN 415V 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

M&L and Repair/Replacement of fabrication of Wooden Box as suitable for SPN 4 way to 12 way DB to be covered as per existing including suitable mason work,surface finishing as per original and locking system complete all all as specified and as directed.

M&L and Repair/Replacement of fabrication of Wooden Box as suitable for TPN DB to be covered as per existing including suitable mason work,surface finishing as per original and locking system complete all all as specified and as directed.

M&L in Replacement of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Supply and Repair/Replacement of Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable of GI pipe (light grade) bracket and clamps,nut bolts are fixed on wall/post and all as required and directed.

Supply and fixing of MCB DB Single pole and neutral 4 way single door Complete all as specified and as directed.

Supply and fixing of SPN 32 amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and as directed.

Supply and lay Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size of pipe 40 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge.

Cutting the existing 50 mm dia GI pipe and inserting 'T' reducer of size 50/32 mm making connection including all necessary fittings and fixtures all as specified and as directed.

Supply and lay 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches outer dia of pipe 32mm including all fittings complete all as specified and directed.

Supply and lay 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches outer dia of pipe 25mm including all fittings complete all as specified and directed.

Supply & Fixing of 32mm dia 3-layer PP-R (Polypropylene random copolymer) Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.

Supply & Fixing of 25mm dia 3-layer PP-R (Polypropylene random copolymer) Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.

OM ENTERPRISE

JAY BHARAT METAL SUPPLIERS