CA NO. CWE/HILLS/PGH/56 OF 2025-2026 CERTAIN REPAIR TO WOODEN AND STEEL FURNITURES AT MIL STN BANBASA

Amount

BED PLY TOP

S&F12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to 1st quality teak wood long rail as per existing size of Bed including removal of damaged long rail all as specified on drawing or as directed by Engineer-in-charge.(Each long rail will be measured as single unit)

All as per item No. 1.02 here in before, but short rail all as specified on drawing or as directed by Engineer-in-charge. (Each short rail will be measured as single unit)

S&F in reapirs to head board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

All as per item No. 1.04, but foot board consisting of 22 x 75mm in section teak battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of teak wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 340mm including 12mm dia half round teak wood beading of both side of head board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to flat iron of mild steel clamps of size 35mm x 5mm, bents to right angle on each corners of Bed ply top all as specified on drawing or as directed by Engineer-in-charge.

Chair dining

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair dining with best quality of approved plastic cane 1.80 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

Chair writing

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and providing new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair writing with best quality of approved plastic cane 1.80 x 0.46 mm cane and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

CHAIR EASY

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and providing new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front frame and providing new teak wood front frame including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front/back rail and providing new teak wood front rail complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge.

(g) Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 1.80 x 0.46 mm cane and border with 3x0.60 mm cane complete all as specified on drawing or as directed by Engineer-in-charge.

CHAIR WOODEN BOTTOM WITHOUT ARMS

Removing of existing unserviceable seat and provide new seat made out of 6mm thick plywood commercial to Chair wooden bottom with wood/steel screws, rest all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and fixing new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and fixing new teak wood front rail complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail fixing new teak wood rear rail complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

COMMON FOR ALL CHAIRS

Removing the existing unserviceable stiffeners and providing new stiffners made out of 1st class seasoned teak wood stiffeners complete all as specified on drawing or as directed by Engineer-in-charge.

Stool Dressing CB

Recaning of Stool dressing with best quality of approved plastic cane half round 2mm wide and 0.4mm thick plastic cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the following furniture items as specified & directed by Engr-in-charge:-

Chair Easy, Chair Dining, Chair Writing & Stool Dressing CB.

Table dining 8 persons

Replacement of existing unserviceable table top for Table dining 8 persons made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

S&F in repairs to unserviceable damaged legs from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table dining 6 persons

Replacement of existing unserviceable table top for Table dining 8 persons made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

S&F in repairs to unserviceable damaged legs from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Common for Table dining 8/6 persons

S&F in repairs Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy :

Replacement of existing unserviceable table top for teapoy made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

S&F in repairs to unserviceable damaged legs from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Centre

Replacement of existing unserviceable table top for Table centre made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

S&F in repairs to unserviceable damaged legs from Table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Writing/Medium/Study :

Replacement of existing unserviceable table top for Table writing made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

Legs as per drg

Foot rest as per drg

Stiffener as per drg

Sides of cabinet with 18mm thick particle board with 0.6 mm thick laminates as per drg

18mm thick particle board with 0.6 mm thick laminates Cabiner door & drawer along with locking arrangement and handles as per drg

TABLE PEG

Replacement of existing unserviceable table top for Table peg made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

S&F in repairs to unserviceable damaged legs from Table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged top rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

16. TABLE BED SIDE

Taking out old ply from the back of table bed side and S&F new back ply 6mm thick commercial BWP ISI mark of the same shape and size of the existing table bed side aqll as specified and directed.

Replacement of existing unserviceable top for Table bed side made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

Opening out old unserviceable shelf and S&F new shelf made out of 12 mm thick ply wood commercial BWP ISI mark of size and shape including 4mm thick teak wood beading all round all as specified and directed.

TABLE DRESSING LADIES

S & F in repair for top of Table dressing made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg.

S&Fixed in repairs new Glass shutters of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit)

Removing the existing unserviceable Aluminium channel and S & Fixed in repairs Aluminium Channel all as specified on drawing or as directed by Engineer-in-charge.

S & Fixed in repairs new back suport made out of 6 mm thick plywood for mirror of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.

S & Fixed in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge. for the following furniture articles:-

Bed Ply top

Chair dining

Chair writing

Chair Easy

Chair wooden bottom without arm

Stool Dressing

Table dining 6/8 persons

Teapoy

Table centre

Table writing

Peg Table

Table bed side

Almirah Large/Medium / Small Steel

S & F in repairs locking device including replacement of brass 6 lever locks iron body with duplicate keys chromium plated to Almirah Large/Medium/Small steel/Locker bed side steel , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah large/Medium/small steel , rest all as shown on drg and as directed by Engr-in-Charge.

Repairs to door of Almirah Large/ medium/small steel as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge.

Chair revolving high back/low back/executivewith arm/without arm/visitor

S & F in repairs of maintenance free Gas lift for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of Padestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of twin wheel castors for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest all as shown on drg and as directed by Engr-in-Charge.

Table Office Officer/clerk Steel

S & F MS Lock (6 liver brass levers) with duplicate keys for drawers ofTable Office Officer/clerk Steel, rest all as shown on drg and as directed by Engr-in-Charge.

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green, rest all as shown on drg and as directed by Engr-in-Charge.

Almirah large steel 1/2 H 1/2 Self

Almirah steel large with shelves

Almirah steel medium with shelves

Chair CB steel with arms

Chair CB Steel without arms

Book Case Steel

Locker Steel

Table Office Officer steel

Table Office clerk steel

Teapoy verandah

Table dining ORs

Chair verandah

Chair Verandah

Conduit section any member made of MS conduit pipe 16 guage, 19mm dia as per drg.

Hard rubber shoe as per drg

Removing old u/s cane from chair verandah and re-caning the chairs etc with approved new plastic cane 4 mm wide half round as per matt pattern of color as approved by Engg-in - charge.

Repair of welding of joints as per drg.

Locker Bed Side Steel:-

S&F in repair to leg made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to MS butt Hinges 75mm long all as shown on Drg and as directed by Engr-in-charge

S&F in repair to Chromium plated Handle 100mm long all as shown on Drg and as directed by Engr-in-charge

S&F in repair to Chromium plated Hasp & Staple of size 75mmx40mmx3mm all as shown on Drg and as directed by Engr-in-charge

M & L for welding of broken joints of Locker Steel including preparation of surface & applying two coats of smoke gray/Olive green synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy Varandah

Replacement of frame of top (without top) of Teapoy Verandah and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for welding of broken joints of Teapoy varandah including preparation of surface and appluing two coat of white synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of existing unserviceable table top for Teapoy verandah made out of 18mm thick pre laminated particle board teak facing on top and balancing white with on the other and all the four edges provided with teak wood beading size 18x4 mm all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

CHARPOY GI PIPE PLY TOP

S&F in repair 12mm thick plywood as per IS:303 BWR Grade, approved Make in single piece as per drawing without any joint to the charpoy G I pipe ply top with suitable steel nut & bolt with washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge. Make- Green ply/Archid.

Reassembling/Tightening the loose components of frame including welding of broken existing MS flat iron stiffners to the long rails before fixing of ply top with frame of charpoy GI pipe ply top complete all as specified & directed by Engr-in-charge.

S&F in repair MS flat iron stiffener of size 35x5mm made in half round shape fit to long rails as per requirement including welding to long rails of charpoy GI pipe ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engr-in-charge.

S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Chapoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

Making short rail for GI Charpoy obtained from item No.(d) above here-in-before cut in to length and threading including removing of existing unserviceable short rails all as specified and directed.

Making leg for GI charpoy from short rail obtained from item No. (e) above here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg.

Common items in Charpoy GI Ply Top

S & Fixed in repairs GI Elbow 32 mm dia three way, ISI marked, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs MS Check nuts, rest all as shown on drg and as directed by Engr-in-Charge.

Sofa Set 4 pieces

Repairs to upholstry of Sofa Set 4 pieces, consisting of a 2 pieces with arms and 2 pieces without arms by removing existing upholstry replacing of all unserviceable materials, viz, tapestry, springs, coir fibre, hessain cloth, long cloth, cotton, cane sticks ete if any to restore the set all as per drg (Serviceable coir fibre, cotton, cane sticks, spring etc retrived shall be reused, but acrylic tapestry shall be new costing minimum of Rs.350/- per ), complete all as shown on drg and as directed by Engr-in-charge.

SOFA SET 4/5 PERSON WITH CUSHION

Replacement of existing U/S cushion of Sofa Set with new foam cushion 40 density 100mm thick of approved make duly covered with tapestry cloth including mulmul cloth and stitching, rest all as shown on drg and as directed by Engr-in-Charge.

Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapestry cloth shall be mat finish and shall not less than Rs. 350/- per metre and as approved by GE.

Removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable bearer from Sofa and providing new first class teak wood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 100mm x 530 mm, rest all as shown on drg and as directed by Engr-in-Charge.

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge. for the following furniture articles:-

Sofa chairs (Each chair will measured single unit)

JAISWAL ENTERPRISES (BID ID -3395246)