REPAIRS / MAINTENANCE OF FIRING RANGE , SECURITY FENCING, CULVERT, SECURITY WALL GATES AND CONNECTED MISC WORKS AT AFS BIDAR

Amount

Removing / Taking out of sand (fine aggregate) and saw dust from small arms range / firing butt. The serviceable materials of sand and saw dust are segregated by sieving and stacking a side for re-use complete all as specifed and as directed.

M&L for fine aggregate (approved sand) and saw dust mixed at (3:1) ratio (three part of sand and one part of saw dust) and spread, levelled, compacted to a true and inclined finished surface, complete all as specifed and as directed.

All as per Sl item No.02 above but except sand and saw dust complete all as specifed and as directed. Note- (i) Sand and Saw dust are obtained from Ser item No.01 (ii) Mixing ration shall be 3:1 (three part of sand and one part of saw dust).

Removal of sand and saw dust obtained from Ser item No.01 above to a distance not exc 50 mtr and depositing where directed of a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed.

S & F Framed work in doors or gates of angle section with gusset plate braces etc complete drilled for fixing of steel sheeting including hooks etc conforming to Fe-410-0 complete all as specifed and as directed.

S & F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed wire with 2.0 mm dia barbs at 75 mm spacing and type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specifed and as directed.

Taking down and re-fixing of galvanized 2 strand steel barbed wire fixing to any type of standard rails straining bolts including securing or tyting and crossing with the provision of galvanized MS wire staples or steel pins etc complete all as specifed and as directed.

Welding in repairs exc 25 mm but not exc 50 mm in length and thickness of metal to be welded not.exc 6 mm complete all as specifed and as directed.

Taking down cement plaster of any description on brick Walls, concrete surfaces including Racking out Joints, hacking for Key, scrubbing down with water,etc. complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement complete all as specifed and as directed.

Preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide / zinc chrome primer complete all as specifed and as directed.

Preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.

Preparation of old painted plastered surfaces and applying one coat of cement base paint on walls complete all as specifed and as directed.

Preparation of old steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specifed and as directed.

RAMESH CONSTRUCTION COMPANY

SHANKAR